# E1.2 F IP30 PROTECTION FOR SWITCHGEAR

ABB E1.2 F IP30 PROTECTION FOR SWITCHGEAR: switchboard or switchgear reference for panel arrangement and interfaces to adjacent equipment. Manufacturer reference 1SDH001252R0163.

## Equipment and file summary

Equipment / resource: E1.2 F IP30 PROTECTION FOR SWITCHGEAR
Manufacturer: ABB
Resource type: Named drawing reference
Manufacturer drawing: 1SDH001252R0163
Manufacturer reference: 1SDH001252R0163
Document revision: B
Model envelope: RB3562001_1PA_001_05_MOSTRINA_F_E1_2.stp: 254 × 12 × 268 mm (approximate X × Y × Z bounds of the tessellated source model)
Listed file formats: STEP
Listed files: 1
Available previews: 1 interactive model variants
Recorded revisions: B
Source checked: 2026-11-03
Download access: Email registration for site downloads; official source links are also available

## Related GA references

- [Switchgear panel](https://eloragrid.ai/objects/switchgear-panel)
- [Switchboard](https://eloragrid.ai/objects/switchboard)
- [Ring main unit](https://eloragrid.ai/objects/ring-main-unit)

Canonical page: https://eloragrid.ai/tools/cad-library/equipment/abb-e1-2-f-ip30-protection-for-switchgear-e636307c75
Manufacturer: ABB
Entry type: Named drawing reference
Part number: Not specified — select exact configuration
Category: Switchboards & switchgear
Formats: STEP
Market discovery: Global
Access: Direct download
Official source: https://search.abb.com/library/Download.aspx?DocumentID=1SDH001252R0163&LanguageCode=en&LanguageCode=it&DocumentPartId=&Action=Launch&DocumentRevisionId=B
Manufacturer evidence: https://search.abb.com/library/Download.aspx?DocumentID=1SDH001252R0163&LanguageCode=en&LanguageCode=it&DocumentPartId=&Action=Launch&DocumentRevisionId=B
Source checked: 2026-11-03

1 original file is available to download here. Manufacturer sources and revisions are listed below.
Confirm the exact regional configuration against the selected manufacturer drawing.
Manufacturer reference 1SDH001252R0163 identifies this switchboard or switchgear reference.


## In plain English

### Using the E1.2 F IP30 PROTECTION FOR SWITCHGEAR reference

ABB E1.2 F IP30 PROTECTION FOR SWITCHGEAR: switchboard or switchgear reference for panel arrangement and interfaces to adjacent equipment. Manufacturer reference 1SDH001252R0163.

### A simple example

Use RB3562001_1PA_001_05_MOSTRINA_F_E1_2.stp revision B for the supplied solid assembly in your 3D layout. Match the E1.2 F IP30 PROTECTION FOR SWITCHGEAR configuration named by ABB.

### What the drawings help you do

Use RB3562001_1PA_001_05_MOSTRINA_F_E1_2.stp revision B for the supplied solid assembly in your 3D layout.

### Before using this reference

- Check enclosure arrangement, incoming connection position and the view used for the adjoining section. A single module drawing does not establish the dimensions or fault rating of an assembled board.
- RB3562001_1PA_001_05_MOSTRINA_F_E1_2.stp has approximate model bounds of 254 × 12 × 268 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.

### What can I use the E1.2 F IP30 PROTECTION FOR SWITCHGEAR reference for?

Use this switchboard or switchgear reference for panel arrangement and interfaces to adjacent equipment. Check enclosure arrangement, incoming connection position and the view used for the adjoining section. A single module drawing does not establish the dimensions or fault rating of an assembled board.

### Which manufacturer reference identifies this drawing?

ABB reference 1SDH001252R0163. The file list retains the original source and recorded revision.

### Terms


Concept diagram: Identify E1.2 F IP30 PROTECTION FOR SWITCHGEAR → Select the drawing or model → Check the mounting interface
Manufacturer reference 1SDH001252R0163 identifies this switchboard or switchgear reference.

- [ABB source](https://search.abb.com/library/Download.aspx?DocumentID=1SDH001252R0163&LanguageCode=en&LanguageCode=it&DocumentPartId=&Action=Launch&DocumentRevisionId=B)


## Which file should I choose?

Use RB3562001_1PA_001_05_MOSTRINA_F_E1_2.stp revision B for the supplied solid assembly in your 3D layout.

## Official files

- RB3562001_1PA_001_05_MOSTRINA_F_E1_2.stp (STEP): https://search.abb.com/library/Download.aspx?DocumentID=1SDH001252R0163&LanguageCode=en&LanguageCode=it&DocumentPartId=&Action=Launch&DocumentRevisionId=B
  Site download: https://eloragrid.ai/tools/cad-library/download/abb-e1-2-f-ip30-protection-for-switchgear-e636307c75/0af15b3c8d17b6536bbb
  Hosting basis: no-explicit-prohibition; publisher attribution: ABB; reviewed: 2026-11-04
  Rights review: Reviewed the available source, embedded drawing text and archive notices. No explicit applicable redistribution prohibition was identified. Rights remain unknown; no licence or manufacturer endorsement is asserted.; evidence: https://search.abb.com/library/Download.aspx?DocumentID=1SDH001252R0163&LanguageCode=en&LanguageCode=it&DocumentPartId=&Action=Launch&DocumentRevisionId=B
  Purpose: Manufacturer drawing reference 1SDH001252R0163; acquired: true; redistribution: unknown; SHA-256: 0af15b3c8d17b6536bbbb8e250130c4bd30c41fd25f74e51468fe083d534c455; revision: B

Global discovery is not proof of regional certification. Confirm exact configuration, revision, dimensional units and use rights with the manufacturer.