# Pfannenberg DTFS 6041 STEP geometry

This STEP member is labelled 30487_6041 and belongs to the DTFS cooling-unit collection. The cooler’s job is to remove heat from an enclosure; this model describes physical geometry for coordination.

Canonical page: https://eloragrid.ai/tools/cad-library/equipment/drawing-30487-6041-7b6e21b39618
Manufacturer: Pfannenberg
Entry type: Named drawing reference
Part number: Not specified — select exact configuration
Category: Thermal management
Formats: STEP
Market discovery: Global
Access: Direct download
Official source: https://www.pfannenberg.com/en-gb/thermal-management/cooling-units/side-mounted-series-6xxx/dtfs-6041/
Manufacturer evidence: https://www.pfannenberg.com/en-gb/thermal-management/cooling-units/side-mounted-series-6xxx/dtfs-6041/
Source checked: 2026-10-13T00:00:00.000Z

Unchanged official originals are available from the site after upload verification. Rights status and original publisher URLs are retained per file; an unconfirmed status is not presented as a licence.
Source discoverability only. Exact USA/Australia configuration, units, frequency and approvals require manufacturer verification.
Open 30487_6041.STEP from the manufacturer archive. Keep it distinct from the grouped 6021/6031 member. Use the matching installation and cut-out files for the selected unit, and establish cooling performance through the actual application and manufacturer data.


## In plain English

### What is this Pfannenberg resource?

This STEP member is labelled 30487_6041 and belongs to the DTFS cooling-unit collection. The cooler’s job is to remove heat from an enclosure; this model describes physical geometry for coordination.

### A simple example

A cabinet designer can position the selected 6041 cooling unit and compare access, adjacent equipment and the separate mounting cut-out documents.

### What the drawings help you do

Open 30487_6041.STEP from the manufacturer archive. Keep it distinct from the grouped 6021/6031 member. Use the matching installation and cut-out files for the selected unit, and establish cooling performance through the actual application and manufacturer data.

### Before using this reference

- Confirm the exact 6041 configuration.
- Obtain the matching cut-out and installation documents.
- Coordinate service access and specified airflow space.

### Is the outer STEP body the panel cut-out?

No. The physical model and the required cut-out are different deliverables. Use the manufacturer’s matching cut-out file for the opening.

### Terms

- Geometry: The physical shape represented by the model or drawing.
- Configuration: The exact equipment version and options selected for the installation.
- Revision: The recorded version of the file or document.

Concept diagram: Selected DTFS 6041 unit → Matching STEP body → Coordinated cabinet layout
A reading guide for this particular resource. These boxes are not the manufacturer's equipment geometry or a connection diagram.

- [Pfannenberg official drawing source](https://www.pfannenberg.com/en-gb/thermal-management/cooling-units/side-mounted-series-6xxx/dtfs-6041/)


## Which file should I choose?

Open 30487_6041.STEP from the manufacturer archive. Keep it distinct from the grouped 6021/6031 member. Use the matching installation and cut-out files for the selected unit, and establish cooling performance through the actual application and manufacturer data.

## Official files

- 3D-models_STEP_DTFS.zip (ZIP): https://www.pfannenberg.com/fileadmin/Redakteur/Products/Downloads/3D_Models/3D-models_STEP_DTFS.zip
  Site download: https://eloragrid.ai/tools/cad-library/download/drawing-30487-6041-7b6e21b39618/reviewed-2c2e7d9d9b433b452027
  Hosting basis: no-explicit-prohibition; publisher attribution: Pfannenberg; reviewed: 2026-10-14T02:37:41.760705+00:00
  Rights review: Reviewed official download/source pages, linked notices and available archive notices. No explicit prohibition on publishing this acquired CAD was identified. Redistribution permission remains unconfirmed; no licence is asserted. Linked sale/supply terms discuss drawings supplied under a contract; their application to publicly downloadable CAD is unclear.; evidence: https://www.pfannenberg.com/en-gb/thermal-management/cooling-units/side-mounted-series-6xxx/dtfs-6041/, https://www.pfannenberg.com/, https://www.pfannenberg.com/en-gb/about/purchasing-conditions/, https://www.pfannenberg.com/en-gb/about/general-conditions/, https://www.pfannenberg.com/en-gb/solutions/environmental-conditions/, https://www.pfannenberg.com/en-gb/terms/, https://www.pfannenberg.com/terms/
  Purpose: Contains 30487_6041.STEP; download the original archive and locate the named member.; acquired: true; redistribution: unknown; SHA-256: ed3b35e1d351edfaa9e30a2ae27f8db5431b2c17d86185b54637b1d42e7080ca; revision: not recorded
  - 30487_6041.STEP

Global discovery is not proof of regional certification. Confirm exact configuration, revision, dimensional units and use rights with the manufacturer.