# DN-FE4 terminal-block socket drawing Manufacturer drawings for DN-FE4 support terminal-block socket layout and mechanical-interface coordination. Check native drawing units and import scale before taking any dimensions. Use the named original drawing for mounting details and confirm the selected configuration in the current manufacturer documentation. ## Equipment and file summary Equipment / resource: DN-FE4 terminal-block socket drawing Manufacturer: AutomationDirect Resource type: Named drawing reference Listed file formats: DWG Listed files: 1 Available previews: Manufacturer source / drawing request Recorded revisions: Confirm the revision with the manufacturer Source checked: 2026-10-13 Download access: Use the official manufacturer source or request the exact drawing ## Related GA references - [AutomationDirect DINnectors](https://eloragrid.ai/objects/automationdirect-dinnectors) - [Terminal strip assembly](https://eloragrid.ai/objects/terminal-strip) - [Cable gland](https://eloragrid.ai/objects/ga-cable-gland) Canonical page: https://eloragrid.ai/tools/cad-library/equipment/drawing-dn-fe4-1f64b46b48d4 Manufacturer: AutomationDirect Entry type: Named drawing reference Part number: Not specified — select exact configuration Category: Wiring & terminals Formats: DWG Market discovery: US / Global Access: Direct download Official source: https://support.automationdirect.com/docs/drawings.html Manufacturer evidence: https://support.automationdirect.com/docs/drawings.html Source checked: 2026-10-13T00:00:00.000Z Original CAD is retained privately; explicit publisher restrictions keep public downloads on the official route. Use Request CAD for exact variants. US and Canada supplier catalogue; globally discoverable. Regional suitability must be verified for exact part. The acquired source archive contains Other PLC Products/DINnectors/Circuit Protection Terminal Blocks/DN-FE4.dwg, a 178,843-byte DWG native file. Its file signature and SHA-256 were checked against the held original. Native non-text geometry was also compared to identify repeated mechanical outlines. The socket drawing does not identify the selected disconnect or protector, or establish a protective function by itself. Use the original drawing annotations and current installation instructions to confirm units, revision and service space. ## In plain English ### What the equipment does A terminal provides an identified point for joining wires to equipment or to other wires. Terminal strips organise those connections so they can be wired and checked. ### A simple example In a substation relay panel, numbered terminals connect the switchyard cables to the protection and control equipment. ### What the drawings help you do The acquired source archive contains Other PLC Products/DINnectors/Circuit Protection Terminal Blocks/DN-FE4.dwg, a 178,843-byte DWG native file. Its file signature and SHA-256 were checked against the held original. Native non-text geometry was also compared to identify repeated mechanical outlines. The socket drawing does not identify the selected disconnect or protector, or establish a protective function by itself. Use the original drawing annotations and current installation instructions to confirm units, revision and service space. ### Before using this reference - Confirm that DN-FE4 is the intended drawing identity for the selected terminal-block socket. - Check native drawing units and import scale before taking any dimensions. - Show the separately selected element with the socket and reserve insertion and removal space. - Check the complete assembly and its current installation instructions, including any omitted hardware. - Retain the manufacturer drawing revision and the source archive identity with the project record. ### What does the DN-FE4 file identify? It identifies the named terminal-block socket drawing in the official DINnectors and DIN Rail archive. Its native member path and checksum are recorded below; this is stronger evidence than a search result or an inferred catalogue number. ### Does this drawing include the complete installation? The socket drawing does not identify the selected disconnect or protector, or establish a protective function by itself. Coordinate adjacent components, wiring and required working space separately. ### Which file should I use? Download the official original archive and select the recorded native member. Follow publisher access terms; this page does not replace the current manufacturer drawing or grant redistribution rights. ### Terms - CAD: Computer-aided design files used to prepare drawings and models. - Revision: The recorded version of a drawing or model. Concept diagram: Find DN-FE4 in the official archive → Open the matching original drawing → Coordinate terminal-block socket interfaces A simplified explanation of how this item works. It does not show terminal wiring or an operating procedure. - [AutomationDirect official source](https://support.automationdirect.com/docs/drawings.html) - [Manufacturer terminal sockets and protector elements](https://cdn.automationdirect.com/static/specs/dinsuppprotector.pdf) ## Which file should I choose? The acquired source archive contains Other PLC Products/DINnectors/Circuit Protection Terminal Blocks/DN-FE4.dwg, a 178,843-byte DWG native file. Its file signature and SHA-256 were checked against the held original. Native non-text geometry was also compared to identify repeated mechanical outlines. The socket drawing does not identify the selected disconnect or protector, or establish a protective function by itself. Use the original drawing annotations and current installation instructions to confirm units, revision and service space. ## Official files - dinnectors.zip (ZIP): https://ftp.automationdirect.com/support/drawings/dinnectors.zip Site download: not publicly hosted Rights review: The drawing page limits the documents to exclusive use by AutomationDirect customers.; evidence: https://support.automationdirect.com/docs/drawings.html Purpose: Contains DN-FE4.dwg; download the original archive and locate the named member.; acquired: true; redistribution: restricted; SHA-256: 62ffc8996c8e69ebf1afd779395e4eaa6b052597283c8b81899e693d1169f884; revision: not recorded - Other PLC Products/DINnectors/Circuit Protection Terminal Blocks/DN-FE4.dwg Global discovery is not proof of regional certification. Confirm exact configuration, revision, dimensional units and use rights with the manufacturer.