# P1-04DAL-2 analogue output module CAD drawings for P1-04DAL-2 help place the selected analogue output module and coordinate its mounting, connection access and service space. An analogue output module sends a variable control signal to connected equipment. The equipment schedule and wiring design establish the actual output type and load. ## Equipment and file summary Equipment / resource: P1-04DAL-2 analogue output module Manufacturer: AutomationDirect Resource type: Named drawing reference Listed file formats: DWG Listed files: 1 Available previews: Manufacturer source / drawing request Recorded revisions: Confirm the revision with the manufacturer Source checked: 2026-10-13 Download access: Use the official manufacturer source or request the exact drawing ## Related GA references - [AutomationDirect Productivity1000 PAC](https://eloragrid.ai/objects/automationdirect-productivity1000-pac) - [AutomationDirect P1-04DAL-2 analogue output module](https://eloragrid.ai/objects/ga-p1-04dal-2-11c9885e8fed) - [PLC CPU module](https://eloragrid.ai/objects/ga-plc-cpu-module) - [HMI touchscreen](https://eloragrid.ai/objects/ga-hmi-touchscreen) Canonical page: https://eloragrid.ai/tools/cad-library/equipment/drawing-p1-04dal-2-11c9885e8fed Manufacturer: AutomationDirect Entry type: Named drawing reference Part number: Not specified — select exact configuration Category: Automation & controls Formats: DWG Market discovery: US / Global Access: Direct download Official source: https://support.automationdirect.com/docs/drawings.html Manufacturer evidence: https://support.automationdirect.com/docs/drawings.html Source checked: 2026-10-13T00:00:00.000Z Original CAD is retained privately; explicit publisher restrictions keep public downloads on the official route. Use Request CAD for exact variants. US and Canada supplier catalogue; globally discoverable. Regional suitability must be verified for exact part. The verified native member is PLC Families/P1000/P1-04DAL-2.dwg. Its identity was checked against the acquired manufacturer archive. Lay out the PAC station before locating cable duct so the terminal strips and expansion joints remain accessible. The drawing is a mechanical coordination reference, not a circuit design or certification record. ## In plain English ### What the equipment does An analogue output module turns a controller's requested value into a changing electrical signal for another device. ### A simple example In a switchroom cooling system, it can send an adjustable speed request to a fan drive. ### What the drawings help you do The verified native member is PLC Families/P1000/P1-04DAL-2.dwg. Its identity was checked against the acquired manufacturer archive. Lay out the PAC station before locating cable duct so the terminal strips and expansion joints remain accessible. The drawing is a mechanical coordination reference, not a circuit design or certification record. ### Before using this reference - Confirm that the project schedule calls for P1-04DAL-2 or an explicitly documented associated drawing identity. - Lay out the PAC station before locating cable duct so the terminal strips and expansion joints remain accessible. - Check the units and drawing revision before measuring or inserting geometry into a project. - Map the shown hardware to the intended station position, terminal approach and control drawing; reserve access to ports and removable terminals. - Verify ratings, compatible accessories and installation clearances using the manufacturer documentation for the exact device. ### What does the P1-04DAL-2 reference verify? It verifies the acquired native drawing identity and its place in the official Productivity1000 PAC hardware source collection. The source member and checksums identify the reviewed file; they do not establish the selected device rating or current revision. ### How should I use the original file? Download the unchanged manufacturer archive from the official route and locate PLC Families/P1000/P1-04DAL-2.dwg. Check the drawing units and revision before using its geometry in the project. ### Can grouped drawing identities replace one another electrically? No. Mechanical drawing grouping only avoids separate pages for matching geometry, views or voltage aliases. Confirm exact electrical function, connection arrangement and manufacturer compatibility separately. ### Terms - CAD: Computer-aided design files used to prepare drawings and models. - Revision: The recorded version of a drawing or model. Concept diagram: Find P1-04DAL-2 in the official archive → Open the matching original drawing → Coordinate plc-io interfaces A simplified explanation of how this item works. It does not show terminal wiring or an operating procedure. - [AutomationDirect official source](https://support.automationdirect.com/docs/drawings.html) ## Which file should I choose? The verified native member is PLC Families/P1000/P1-04DAL-2.dwg. Its identity was checked against the acquired manufacturer archive. Lay out the PAC station before locating cable duct so the terminal strips and expansion joints remain accessible. The drawing is a mechanical coordination reference, not a circuit design or certification record. ## Official files - p1000.zip (ZIP): https://ftp.automationdirect.com/support/drawings/p1000.zip Site download: not publicly hosted Rights review: The drawing page limits the documents to exclusive use by AutomationDirect customers.; evidence: https://support.automationdirect.com/docs/drawings.html Purpose: Contains P1-04DAL-2.dwg; download the original archive and locate the named member.; acquired: true; redistribution: restricted; SHA-256: e0452210104345efa6dc873f83776bbb971cb8b0b41cdc48915bded8116a4662; revision: not recorded - PLC Families/P1000/P1-04DAL-2.dwg Global discovery is not proof of regional certification. Confirm exact configuration, revision, dimensional units and use rights with the manufacturer.