{"id":"drawing-sd-con-d2ba89af68bc","name":"SD-CON non-fused disconnect hardware CAD drawing","manufacturer":"AutomationDirect","category":"switchgear","description":"Manufacturer drawings for SD-CON support disconnect layout and mechanical-interface coordination. Place the disconnect and its operating hardware together so door alignment, travel and terminal access can be reviewed. Use the named original drawing for mounting details and confirm the selected configuration in the current manufacturer documentation.","equipment":["Non-Fused Disconnects"],"keywords":["SD-CON","Non-Fused Disconnects","SD-CON.dwg","SD-CON non-fused disconnect hardware CAD drawing","Manufacturer drawings for SD-CON support disconnect layout and mechanical-interface coordination. Place the disconnect and its operating hardware together so door alignment, travel and terminal access can be reviewed. Use the named original drawing for mounting details and confirm the selected configuration in the current manufacturer documentation."],"markets":["US","Global"],"marketNote":"US and Canada supplier catalogue; globally discoverable. Regional suitability must be verified for exact part.","kind":"drawing","sourceUrl":"https://support.automationdirect.com/docs/drawings.html","officialEvidenceUrl":"https://support.automationdirect.com/docs/drawings.html","sourcePublisher":"AutomationDirect","formats":["DWG"],"availability":"direct","accessNote":"Original CAD is retained privately; explicit publisher restrictions keep public downloads on the official route. Use Request CAD for exact variants.","checkedAt":"2026-10-13T00:00:00.000Z","files":[{"id":"cad-sd-con-dwg-389d056e0e4a65","name":"nonfused_disconnects.zip","format":"ZIP","purpose":"Contains SD-CON.dwg; download the original archive and locate the named member.","url":"https://ftp.automationdirect.com/support/drawings/nonfused_disconnects.zip","availability":"direct","bytes":465546,"sha256":"264011e500bdd8f8e8cb3988f1c975a384570e7156971cab3ad21dd3e7203302","retrievedAt":"2026-10-13T05:24:41.677487+00:00","archiveContents":["Power Products/Non-fused Disconnects/SD-CON.dwg"],"validation":"archive-inspected","redistribution":"restricted","rightsReview":{"checkedAt":"2026-10-14T02:47:39.871680+00:00","sources":["https://support.automationdirect.com/docs/drawings.html"],"note":"The drawing page limits the documents to exclusive use by AutomationDirect customers."},"archiveMember":"Power Products/Non-fused Disconnects/SD-CON.dwg"}],"fileClasses":["mechanical CAD","dimensioned drawings"],"configurationNote":"The verified native member is Power Products/Non-fused Disconnects/SD-CON.dwg. Its identity was checked against the acquired manufacturer archive. Place the disconnect and its operating hardware together so door alignment, travel and terminal access can be reviewed. The drawing is a mechanical coordination reference, not a circuit design or certification record.","drawingReference":{"family":"Non-Fused Disconnects","filenames":["SD-CON.dwg"],"parentId":"ad-nonfused_disconnects"},"equipmentFacts":[{"label":"Equipment / resource","value":"SD-CON non-fused disconnect hardware CAD drawing"},{"label":"Manufacturer","value":"AutomationDirect"},{"label":"Resource type","value":"Named drawing reference"},{"label":"Listed file formats","value":"DWG"},{"label":"Listed files","value":"1"},{"label":"Available previews","value":"Manufacturer source / drawing request"},{"label":"Recorded revisions","value":"Confirm the revision with the manufacturer"},{"label":"Source checked","value":"2026-10-13"},{"label":"Download access","value":"Use the official manufacturer source or request the exact drawing"}],"relatedReferences":[{"name":"AutomationDirect non-fused disconnects","url":"https://eloragrid.ai/objects/ad-nonfused-disconnects"},{"name":"Switchgear panel","url":"https://eloragrid.ai/objects/switchgear-panel"},{"name":"Switchboard","url":"https://eloragrid.ai/objects/switchboard"},{"name":"Ring main unit","url":"https://eloragrid.ai/objects/ring-main-unit"}],"nativeFiles":[{"filename":"Power Products/Non-fused Disconnects/SD-CON.dwg","format":"DWG","bytes":145180,"sha256":"26023e3d0321bea889078dda26ff39d7626e7fae2a9f5d6cd6c955f092e729ac","archiveSha256":"264011e500bdd8f8e8cb3988f1c975a384570e7156971cab3ad21dd3e7203302","sourceUrl":"https://ftp.automationdirect.com/support/drawings/nonfused_disconnects.zip","signature":"AC1015"}],"fileChoiceGuidance":["The verified native member is Power Products/Non-fused Disconnects/SD-CON.dwg. Its identity was checked against the acquired manufacturer archive. Place the disconnect and its operating hardware together so door alignment, travel and terminal access can be reviewed. The drawing is a mechanical coordination reference, not a circuit design or certification record."],"plainEnglish":{"title":"What the equipment does","introduction":"A disconnector separates equipment from its supply under its specified conditions. Whether it can also interrupt load current depends on the device's switching rating.","example":"In a switchyard, a disconnector provides an isolation point for a circuit section within the site's operating procedure.","drawings":"The verified native member is Power Products/Non-fused Disconnects/SD-CON.dwg. Its identity was checked against the acquired manufacturer archive. Place the disconnect and its operating hardware together so door alignment, travel and terminal access can be reviewed. The drawing is a mechanical coordination reference, not a circuit design or certification record.","terms":[{"name":"CAD","meaning":"Computer-aided design files used to prepare drawings and models."},{"name":"Revision","meaning":"The recorded version of a drawing or model."}],"diagram":"flow","steps":["Find SD-CON in the official archive","Open the matching original drawing","Coordinate disconnect interfaces"],"caption":"A simplified explanation of how this item works. It does not show terminal wiring or an operating procedure.","sources":[{"label":"AutomationDirect official source","url":"https://support.automationdirect.com/docs/drawings.html"}],"profileId":"disconnect","checklist":["Confirm that the project schedule calls for SD-CON or an explicitly documented associated drawing identity.","Place the disconnect and its operating hardware together so door alignment, travel and terminal access can be reviewed.","Check the units and drawing revision before measuring or inserting geometry into a project.","Coordinate the mounting and connection faces with adjacent equipment, enclosure access and the cable route.","Verify ratings, compatible accessories and installation clearances using the manufacturer documentation for the exact device."],"questions":[{"question":"What does the SD-CON reference verify?","answer":"It verifies the acquired native drawing identity and its place in the official non-fused disconnect hardware source collection. The source member and checksums identify the reviewed file; they do not establish the selected device rating or current revision."},{"question":"How should I use the original file?","answer":"Download the unchanged manufacturer archive from the official route and locate Power Products/Non-fused Disconnects/SD-CON.dwg. Check the drawing units and revision before using its geometry in the project."},{"question":"Can grouped drawing identities replace one another electrically?","answer":"No. Mechanical drawing grouping only avoids separate pages for matching geometry, views or voltage aliases. Confirm exact electrical function, connection arrangement and manufacturer compatibility separately."}]},"canonicalUrl":"https://eloragrid.ai/tools/cad-library/equipment/drawing-sd-con-d2ba89af68bc"}