# T1H-EBC100 controller communications interface CAD drawings for T1H-EBC100 help place the selected controller communications interface and coordinate its mounting, connection access and service space. A controller communications interface connects the selected controller system to a specified information link. Cable connectors and their bend space are part of the equipment arrangement. ## Equipment and file summary Equipment / resource: T1H-EBC100 controller communications interface Manufacturer: AutomationDirect Resource type: Named drawing reference Listed file formats: DWG Listed files: 1 Available previews: Manufacturer source / drawing request Recorded revisions: Confirm the revision with the manufacturer Source checked: 2026-10-13 Download access: Use the official manufacturer source or request the exact drawing ## Related GA references - [AutomationDirect Terminator Field I/O](https://eloragrid.ai/objects/automationdirect-terminator-field-i-o) - [AutomationDirect T1H-EBC100 controller communications interface](https://eloragrid.ai/objects/ga-t1h-ebc100-b2903cfa9a09) - [PLC CPU module](https://eloragrid.ai/objects/ga-plc-cpu-module) - [HMI touchscreen](https://eloragrid.ai/objects/ga-hmi-touchscreen) Canonical page: https://eloragrid.ai/tools/cad-library/equipment/drawing-t1h-ebc100-b2903cfa9a09 Manufacturer: AutomationDirect Entry type: Named drawing reference Part number: Not specified — select exact configuration Category: Automation & controls Formats: DWG Market discovery: US / Global Access: Direct download Official source: https://support.automationdirect.com/docs/drawings.html Manufacturer evidence: https://support.automationdirect.com/docs/drawings.html Source checked: 2026-10-13T00:00:00.000Z Original CAD is retained privately; explicit publisher restrictions keep public downloads on the official route. Use Request CAD for exact variants. US and Canada supplier catalogue; globally discoverable. Regional suitability must be verified for exact part. The verified native member is Other PLC Products/Terminator Field IO/T1H-EBC100.dwg. Its identity was checked against the acquired manufacturer archive. Use the device outline to coordinate the I/O station, its terminals and the service access needed beside cable duct. The drawing is a mechanical coordination reference, not a circuit design or certification record. ## In plain English ### What the equipment does Communication equipment carries measurements, status and commands between devices. The devices must support the same connection and communication method. ### A simple example In a microgrid, communication links let the controller receive battery status and send operating requests to an inverter. ### What the drawings help you do The verified native member is Other PLC Products/Terminator Field IO/T1H-EBC100.dwg. Its identity was checked against the acquired manufacturer archive. Use the device outline to coordinate the I/O station, its terminals and the service access needed beside cable duct. The drawing is a mechanical coordination reference, not a circuit design or certification record. ### Before using this reference - Confirm that the project schedule calls for T1H-EBC100 or an explicitly documented associated drawing identity. - Use the device outline to coordinate the I/O station, its terminals and the service access needed beside cable duct. - Check the units and drawing revision before measuring or inserting geometry into a project. - Map the shown hardware to the intended station position, terminal approach and control drawing; reserve access to ports and removable terminals. - Verify ratings, compatible accessories and installation clearances using the manufacturer documentation for the exact device. ### What does the T1H-EBC100 reference verify? It verifies the acquired native drawing identity and its place in the official Terminator field-I/O hardware source collection. The source member and checksums identify the reviewed file; they do not establish the selected device rating or current revision. ### How should I use the original file? Download the unchanged manufacturer archive from the official route and locate Other PLC Products/Terminator Field IO/T1H-EBC100.dwg. Check the drawing units and revision before using its geometry in the project. ### Can grouped drawing identities replace one another electrically? No. Mechanical drawing grouping only avoids separate pages for matching geometry, views or voltage aliases. Confirm exact electrical function, connection arrangement and manufacturer compatibility separately. ### Terms - CAD: Computer-aided design files used to prepare drawings and models. - Revision: The recorded version of a drawing or model. Concept diagram: Find T1H-EBC100 in the official archive → Open the matching original drawing → Coordinate plc-io interfaces A simplified explanation of how this item works. It does not show terminal wiring or an operating procedure. - [AutomationDirect official source](https://support.automationdirect.com/docs/drawings.html) ## Which file should I choose? The verified native member is Other PLC Products/Terminator Field IO/T1H-EBC100.dwg. Its identity was checked against the acquired manufacturer archive. Use the device outline to coordinate the I/O station, its terminals and the service access needed beside cable duct. The drawing is a mechanical coordination reference, not a circuit design or certification record. ## Official files - tio.zip (ZIP): https://ftp.automationdirect.com/support/drawings/tio.zip Site download: not publicly hosted Rights review: The drawing page limits the documents to exclusive use by AutomationDirect customers.; evidence: https://support.automationdirect.com/docs/drawings.html Purpose: Contains T1H-EBC100.dwg; download the original archive and locate the named member.; acquired: true; redistribution: restricted; SHA-256: 9ae4da496d59934a7f46e262100ffe1d1704f4e0c1f69d2341d289966bb4b007; revision: not recorded - Other PLC Products/Terminator Field IO/T1H-EBC100.dwg Global discovery is not proof of regional certification. Confirm exact configuration, revision, dimensional units and use rights with the manufacturer.