# Double-headed push button, plastic, Ø22, 1 green flush marked I + 1 red projecting marked O, spring clamp terminal, 1 NO + 1 NC Schneider Electric Double-headed push button, plastic, Ø22, 1 green flush marked I + 1 red projecting marked O, spring clamp terminal, 1 NO + 1 NC: original STEP for terminal or connection hardware layouts. ## Equipment and file summary Equipment / resource: Double-headed push button, plastic, Ø22, 1 green flush marked I + 1 red projecting marked O, spring clamp terminal, 1 NO + 1 NC Manufacturer: Schneider Electric Resource type: Product Manufacturer drawing identity: Double-headed push button, plastic, Ø22, 1 green flush marked I + 1 red projecting marked O, spring clamp terminal, 1 NO + 1 NC Source document: xb5al734155-3d; revision 1.0 Source-model envelope: 29.8 × 49.4 × 56 mm 2D preview basis: The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions. Listed file formats: STEP Listed files: 1 Available previews: 1 drawing previews; 1 interactive model variants Recorded revisions: 1.0 Source checked: 2026-11-11 Download access: Email registration for site downloads; official source links are also available ## Related GA references - [Terminal strip assembly](https://eloragrid.ai/objects/terminal-strip) - [Cable gland](https://eloragrid.ai/objects/ga-cable-gland) Canonical page: https://eloragrid.ai/tools/cad-library/equipment/mfr-schneider-electric-double-headed-push-button-plastic-22-1-green-flush-marked-i-1-red-projecting-marked-o-aed34ea017 Manufacturer: Schneider Electric Entry type: Product Part number: Not specified — select exact configuration Category: Wiring & terminals Formats: STEP Market discovery: Global Access: Direct download Official source: https://www.se.com/us/en/download/document/xb5al734155-3d/ Manufacturer evidence: https://www.se.com/us/en/download/document/xb5al734155-3d/ Source checked: 2026-11-11 Inspected originals are available from this website through the existing download email prompt. Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately. Use the manufacturer configuration named Double-headed push button, plastic, Ø22, 1 green flush marked I + 1 red projecting marked O, spring clamp terminal, 1 NO + 1 NC. ## In plain English ### What the equipment does A terminal provides an identified point for joining wires to equipment or to other wires. Terminal strips organise those connections so they can be wired and checked. ### A simple example Use xb5al734155-3d.stp (revision 1.0) to place the original solid geometry in your 3D assembly. The ZIP contains the unmodified xb5al734155-3d.stp. ### What the drawings help you do Use xb5al734155-3d.stp (revision 1.0) to place the original solid geometry in your 3D assembly. The ZIP contains the unmodified xb5al734155-3d.stp. ### Before using this reference - Match Schneider Electric Double-headed push button, plastic, Ø22, 1 green flush marked I + 1 red projecting marked O, spring clamp terminal, 1 NO + 1 NC and the exact source filename shown above. - The supplied model has approximate X × Y × Z bounds of 29.8 × 49.4 × 56 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet. - The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions. - The source was checked on 2026-11-11; recorded file revisions: xb5al734155-3d.stp — 1.0. Use Documentation & sources to check for a newer issue. ### Which original files are supplied for Double-headed push button, plastic, Ø22, 1 green flush marked I + 1 red projecting marked O, spring clamp terminal, 1 NO + 1 NC? 1 inspected original for Schneider Electric Double-headed push button, plastic, Ø22, 1 green flush marked I + 1 red projecting marked O, spring clamp terminal, 1 NO + 1 NC: xb5al734155-3d.stp (STEP). ### Where did these Schneider Electric files come from? Schneider Electric supplied the original files through https://www.se.com/us/en/download/document/xb5al734155-3d/. The source reference, revision, original bytes and checksum are retained with each download. ### Terms - CAD: Computer-aided design files used to prepare drawings and models. - Revision: The recorded version of a drawing or model. Concept diagram: Identify Double-headed push button, plastic, Ø22, 1 green flush marked I + 1 red projecting marked O, spring clamp terminal, 1 NO + 1 NC → Choose STEP → Check the matching source configuration A simplified explanation of how this item works. It does not show terminal wiring or an operating procedure. - [Schneider Electric official source](https://www.se.com/us/en/download/document/xb5al734155-3d/) ## Which file should I choose? Use xb5al734155-3d.stp (revision 1.0) to place the original solid geometry in your 3D assembly. The ZIP contains the unmodified xb5al734155-3d.stp. ## Official files - xb5al734155-3d.stp (STEP): https://download.se.com/files?p_Doc_Ref=xb5al734155-3d&p_enDocType=CAD Site download: https://eloragrid.ai/tools/cad-library/download/mfr-schneider-electric-double-headed-push-button-plastic-22-1-green-flush-marked-i-1-red-projecting-marked-o-aed34ea017/se-838af16ba88444a4a0ae Hosting basis: no-explicit-prohibition; publisher attribution: Schneider Electric; reviewed: 2026-11-11 Rights review: Public manufacturer/supplier CAD original inspected with its included notices; no explicit applicable reproduction prohibition identified. Rights remain unknown.; evidence: https://download.se.com/files?p_Doc_Ref=xb5al734155-3d&p_enDocType=CAD Purpose: Original manufacturer STEP geometry; acquired: true; redistribution: unknown; SHA-256: 2a96e6775dec2fb1479b7d95f0d276192f56bdaae2a6b4883479b8777ece6bdc; revision: 1.0 Global discovery is not proof of regional certification. Confirm exact configuration, revision, dimensional units and use rights with the manufacturer.