# iEM3115_Energy Meter_3D CAD_Simplifed File Schneider Electric iEM3115_Energy Meter_3D CAD_Simplifed File: original STEP for protection or metering equipment layouts. ## Equipment and file summary Equipment / resource: iEM3115_Energy Meter_3D CAD_Simplifed File Manufacturer: Schneider Electric Resource type: Product Manufacturer drawing identity: iEM3115_Energy Meter_3D CAD_Simplifed File Source document: A9MEM3115_3D-Simplified; revision 1.0 Source-model envelope: 90.2 × 94.5 × 69.1 mm 2D preview basis: The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions. Listed file formats: STEP Listed files: 1 Available previews: 1 drawing previews; 1 interactive model variants Recorded revisions: 1.0 Source checked: 2026-11-11 Download access: Email registration for site downloads; official source links are also available ## Related GA references - [Protection relay IED](https://eloragrid.ai/objects/ga-protection-relay-ied) - [Power quality meter](https://eloragrid.ai/objects/ga-power-quality-meter) Canonical page: https://eloragrid.ai/tools/cad-library/equipment/mfr-schneider-electric-iem3115-energy-meter-3d-cad-simplifed-file-bce1cf73e1 Manufacturer: Schneider Electric Entry type: Product Part number: Not specified — select exact configuration Category: Protection & metering Formats: STEP Market discovery: Global Access: Direct download Official source: https://www.se.com/us/en/download/document/A9MEM3115_3D-Simplified/ Manufacturer evidence: https://www.se.com/us/en/download/document/A9MEM3115_3D-Simplified/ Source checked: 2026-11-11 Inspected originals are available from this website through the existing download email prompt. Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately. Use the manufacturer configuration named iEM3115_Energy Meter_3D CAD_Simplifed File. ## In plain English ### What the equipment does An energy meter adds up electrical energy over time, rather than showing only the power being used at one moment. The units identify the type of energy recorded. ### A simple example Use A9MEM3115_3D-Simplified.stp (revision 1.0) to place the original solid geometry in your 3D assembly. The ZIP contains the unmodified A9MEM3115_3D-Simplified.stp. ### What the drawings help you do Use A9MEM3115_3D-Simplified.stp (revision 1.0) to place the original solid geometry in your 3D assembly. The ZIP contains the unmodified A9MEM3115_3D-Simplified.stp. ### Before using this reference - Match Schneider Electric iEM3115_Energy Meter_3D CAD_Simplifed File and the exact source filename shown above. - The supplied model has approximate X × Y × Z bounds of 90.2 × 94.5 × 69.1 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet. - The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions. - The source was checked on 2026-11-11; recorded file revisions: A9MEM3115_3D-Simplified.stp — 1.0. Use Documentation & sources to check for a newer issue. ### Which original files are supplied for iEM3115_Energy Meter_3D CAD_Simplifed File? 1 inspected original for Schneider Electric iEM3115_Energy Meter_3D CAD_Simplifed File: A9MEM3115_3D-Simplified.stp (STEP). ### Where did these Schneider Electric files come from? Schneider Electric supplied the original files through https://www.se.com/us/en/download/document/A9MEM3115_3D-Simplified/. The source reference, revision, original bytes and checksum are retained with each download. ### Terms - CAD: Computer-aided design files used to prepare drawings and models. - Revision: The recorded version of a drawing or model. Concept diagram: Identify iEM3115_Energy Meter_3D CAD_Simplifed File → Choose STEP → Check the matching source configuration A simplified explanation of how this item works. It does not show terminal wiring or an operating procedure. - [Schneider Electric official source](https://www.se.com/us/en/download/document/A9MEM3115_3D-Simplified/) ## Which file should I choose? Use A9MEM3115_3D-Simplified.stp (revision 1.0) to place the original solid geometry in your 3D assembly. The ZIP contains the unmodified A9MEM3115_3D-Simplified.stp. ## Official files - A9MEM3115_3D-Simplified.stp (STEP): https://download.se.com/files?p_Doc_Ref=A9MEM3115_3D-Simplified&p_enDocType=CAD Site download: https://eloragrid.ai/tools/cad-library/download/mfr-schneider-electric-iem3115-energy-meter-3d-cad-simplifed-file-bce1cf73e1/se-6bd14559b7a67f20babb Hosting basis: no-explicit-prohibition; publisher attribution: Schneider Electric; reviewed: 2026-11-11 Rights review: Public manufacturer/supplier CAD original inspected with its included notices; no explicit applicable reproduction prohibition identified. Rights remain unknown.; evidence: https://download.se.com/files?p_Doc_Ref=A9MEM3115_3D-Simplified&p_enDocType=CAD Purpose: Original manufacturer STEP geometry; acquired: true; redistribution: unknown; SHA-256: f0a5cef501d7818319055f01fc13b0ab662e4c66998e1b9f997d85b22b1ef997; revision: 1.0 Global discovery is not proof of regional certification. Confirm exact configuration, revision, dimensional units and use rights with the manufacturer.