{"id":"weidmueller-article-2658590000","name":"S-3L-320/10 — Cross-connector for terminal block / Cross-connector (terminal) Number of poles: 18, Pitch in mm: 17.80, 63 A, grey","manufacturer":"Weidmüller","category":"wiring","description":"Weidmüller S-3L-320/10 — Cross-connector for terminal block / Cross-connector (terminal) Number of poles: 18, Pitch in mm: 17.80, 63 A, grey. Manufacturer CAD files for wiring equipment selection and layout, identified by article 2658590000.","equipment":["wiring","S-3L-320/10 — Cross-connector for terminal block / Cross-connector (terminal) Number of poles: 18, Pitch in mm: 17.80, 63 A, grey"],"keywords":["Weidmüller","S-3L-320/10 — Cross-connector for terminal block / Cross-connector (terminal) Number of poles: 18, Pitch in mm: 17.80, 63 A, grey","2658590000","wiring","DWG","DXF","STEP"],"markets":["Global"],"marketNote":"Confirm regional configuration, ratings and approvals with the manufacturer.","kind":"product","partNumber":"2658590000","sourceUrl":"https://eshop.weidmueller.com.cn/en/s-3l-32010/p/2658590000/downloads#engineering-support","officialEvidenceUrl":"https://eshop.weidmueller.com.cn/en/s-3l-32010/p/2658590000/downloads#engineering-support","sourcePublisher":"Weidmüller","formats":["DWG","DXF","STEP"],"availability":"direct","accessNote":"Manufacturer CAD files for the listed equipment reference. Open the original files in compatible CAD software.","checkedAt":"2026-11-17T15:50:41.709187+00:00","fileClasses":["original manufacturer CAD"],"technicalFacts":[{"label":"Manufacturer reference","value":"2658590000","sourceUrl":"https://eshop.weidmueller.com.cn/en/s-3l-32010/p/2658590000/downloads#engineering-support"},{"label":"Manufacturer type","value":"S-3L-320/10","sourceUrl":"https://eshop.weidmueller.com.cn/en/s-3l-32010/p/2658590000/downloads#engineering-support"},{"label":"Available native formats","value":"DWG / DXF / STEP","sourceUrl":"https://eshop.weidmueller.com.cn/en/s-3l-32010/p/2658590000/downloads#engineering-support"}],"configurationNote":"Check the exact manufacturer article and selected configuration against the original drawing. Publisher-shared geometry and alternate formats remain on this equipment entry.","files":[{"id":"native-c8382720061ff12d154a6ba8-step","name":"2658590000.stp","format":"STEP","purpose":"Manufacturer STEP CAD file","url":"https://assets.dam.weidmueller.com/assets/api/5232f90a-2b4e-4d2d-92da-c307b7e9289b/original/2658590000.stp","availability":"direct","sha256":"c8382720061ff12d154a6ba86accee87d03c8173bd991ad2e45775c5d78bd8b5","bytes":539260,"filenameBasis":"manufacturer-metadata","validation":"signature-checked","hosted":true,"redistribution":"unknown","delivery":{"kind":"source-bundle","name":"2658590000.stp.zip","format":"ZIP","sha256":"e12f325736537ebec1c2d83c04941c5862fe3e401ad8158de93a9a38f091cf52","bytes":89148,"includes":["2658590000.stp"]},"rightsReview":{"checkedAt":"2026-11-18T04:11:33.177394+00:00","sources":["https://assets.dam.weidmueller.com/assets/api/5232f90a-2b4e-4d2d-92da-c307b7e9289b/original/2658590000.stp","https://www.weidmueller.com/int/service/engineering_data.jsp","https://www.weidmueller.com/int/other/imprint.jsp"],"note":"Manufacturer original retained unchanged. Engineering-data terms and imprint reviewed under the existing no-explicit-prohibition policy. Copyright remains with the manufacturer; no separate written redistribution permission or explicit licence is claimed."},"sourceCheckedAt":"2026-11-18T04:11:33.177394+00:00","hostingBasis":{"policy":"no-explicit-prohibition","checkedAt":"2026-11-18T04:11:33.177394+00:00","evidenceUrl":"https://www.weidmueller.com/int/service/engineering_data.jsp","attribution":"Weidmüller"},"previewGroup":"weidmueller-article-2658590000","downloadUrl":"https://eloragrid.ai/tools/cad-library/download/weidmueller-article-2658590000/native-c8382720061ff12d154a6ba8-step"},{"id":"native-ef34ed015b52737366b0e06e-zip","name":"2658590000_DWG.zip","format":"ZIP","purpose":"Manufacturer native CAD archive","url":"https://assets.dam.weidmueller.com/assets/api/f2a52a67-4821-4d7e-8fe1-b7cf33e88c21/original/2658590000_DWG.zip","availability":"direct","sha256":"ef34ed015b52737366b0e06e82a2447055d52714a585bff192e4f15e83629fac","bytes":40750,"filenameBasis":"manufacturer-metadata","validation":"archive-inspected","hosted":true,"redistribution":"unknown","delivery":{"kind":"original","name":"2658590000_DWG.zip","format":"ZIP","sha256":"ef34ed015b52737366b0e06e82a2447055d52714a585bff192e4f15e83629fac","bytes":40750,"includes":["2658590000_DWG.zip"]},"rightsReview":{"checkedAt":"2026-11-18T04:11:33.177394+00:00","sources":["https://assets.dam.weidmueller.com/assets/api/f2a52a67-4821-4d7e-8fe1-b7cf33e88c21/original/2658590000_DWG.zip","https://www.weidmueller.com/int/service/engineering_data.jsp","https://www.weidmueller.com/int/other/imprint.jsp"],"note":"Manufacturer original retained unchanged. Engineering-data terms and imprint reviewed under the existing no-explicit-prohibition policy. Copyright remains with the manufacturer; no separate written redistribution permission or explicit licence is claimed."},"archiveContents":["2658590000_back.DWG","2658590000_bottom.DWG","2658590000_front.DWG","2658590000_left.DWG","2658590000_right.DWG","2658590000_top.DWG"],"sourceCheckedAt":"2026-11-18T04:11:33.177394+00:00","hostingBasis":{"policy":"no-explicit-prohibition","checkedAt":"2026-11-18T04:11:33.177394+00:00","evidenceUrl":"https://www.weidmueller.com/int/service/engineering_data.jsp","attribution":"Weidmüller"},"previewGroup":"weidmueller-article-2658590000","downloadUrl":"https://eloragrid.ai/tools/cad-library/download/weidmueller-article-2658590000/native-ef34ed015b52737366b0e06e-zip"},{"id":"native-bbd86b8fca420a288c2c5366-zip","name":"2658590000_DXF.zip","format":"ZIP","purpose":"Manufacturer native CAD archive","url":"https://assets.dam.weidmueller.com/assets/api/d7243d57-5281-41bf-b959-c55df6e2e2ff/original/2658590000_DXF.zip","availability":"direct","sha256":"bbd86b8fca420a288c2c5366d33a597b502fcf826242c8cd9cb5ec3ed7985ee6","bytes":34393,"filenameBasis":"manufacturer-metadata","validation":"archive-inspected","hosted":true,"redistribution":"unknown","delivery":{"kind":"original","name":"2658590000_DXF.zip","format":"ZIP","sha256":"bbd86b8fca420a288c2c5366d33a597b502fcf826242c8cd9cb5ec3ed7985ee6","bytes":34393,"includes":["2658590000_DXF.zip"]},"rightsReview":{"checkedAt":"2026-11-18T04:11:33.177394+00:00","sources":["https://assets.dam.weidmueller.com/assets/api/d7243d57-5281-41bf-b959-c55df6e2e2ff/original/2658590000_DXF.zip","https://www.weidmueller.com/int/service/engineering_data.jsp","https://www.weidmueller.com/int/other/imprint.jsp"],"note":"Manufacturer original retained unchanged. Engineering-data terms and imprint reviewed under the existing no-explicit-prohibition policy. Copyright remains with the manufacturer; no separate written redistribution permission or explicit licence is claimed."},"archiveContents":["2658590000_back.DXF","2658590000_bottom.DXF","2658590000_front.DXF","2658590000_left.DXF","2658590000_right.DXF","2658590000_top.DXF"],"sourceCheckedAt":"2026-11-18T04:11:33.177394+00:00","hostingBasis":{"policy":"no-explicit-prohibition","checkedAt":"2026-11-18T04:11:33.177394+00:00","evidenceUrl":"https://www.weidmueller.com/int/service/engineering_data.jsp","attribution":"Weidmüller"},"previewGroup":"weidmueller-article-2658590000","downloadUrl":"https://eloragrid.ai/tools/cad-library/download/weidmueller-article-2658590000/native-bbd86b8fca420a288c2c5366-zip"}],"artifacts":[{"id":"native-c8382720061ff12d154a6ba8-step","name":"2658590000.stp","format":"STEP","purpose":"Manufacturer STEP CAD file","containedFormats":["STEP"],"downloadFormat":"ZIP","provenance":"manufacturer_source","sourceUrl":"https://assets.dam.weidmueller.com/assets/api/5232f90a-2b4e-4d2d-92da-c307b7e9289b/original/2658590000.stp","sourceSha256":"c8382720061ff12d154a6ba86accee87d03c8173bd991ad2e45775c5d78bd8b5","artifactSha256":"e12f325736537ebec1c2d83c04941c5862fe3e401ad8158de93a9a38f091cf52","bytes":89148,"archiveMember":null,"revision":null,"access":{"policyVersion":1,"access":"public","reason":"public_original"},"downloadUrl":"/tools/cad-library/download/weidmueller-article-2658590000/native-c8382720061ff12d154a6ba8-step","customerPrice":0},{"id":"native-ef34ed015b52737366b0e06e-zip","name":"2658590000_DWG.zip","format":"ZIP","purpose":"Manufacturer native CAD archive","containedFormats":["DWG"],"downloadFormat":"ZIP","provenance":"manufacturer_source","sourceUrl":"https://assets.dam.weidmueller.com/assets/api/f2a52a67-4821-4d7e-8fe1-b7cf33e88c21/original/2658590000_DWG.zip","sourceSha256":"ef34ed015b52737366b0e06e82a2447055d52714a585bff192e4f15e83629fac","artifactSha256":"ef34ed015b52737366b0e06e82a2447055d52714a585bff192e4f15e83629fac","bytes":40750,"archiveMember":null,"revision":null,"access":{"policyVersion":1,"access":"public","reason":"public_original"},"downloadUrl":"/tools/cad-library/download/weidmueller-article-2658590000/native-ef34ed015b52737366b0e06e-zip","customerPrice":0},{"id":"native-bbd86b8fca420a288c2c5366-zip","name":"2658590000_DXF.zip","format":"ZIP","purpose":"Manufacturer native CAD archive","containedFormats":["DXF"],"downloadFormat":"ZIP","provenance":"manufacturer_source","sourceUrl":"https://assets.dam.weidmueller.com/assets/api/d7243d57-5281-41bf-b959-c55df6e2e2ff/original/2658590000_DXF.zip","sourceSha256":"bbd86b8fca420a288c2c5366d33a597b502fcf826242c8cd9cb5ec3ed7985ee6","artifactSha256":"bbd86b8fca420a288c2c5366d33a597b502fcf826242c8cd9cb5ec3ed7985ee6","bytes":34393,"archiveMember":null,"revision":null,"access":{"policyVersion":1,"access":"public","reason":"public_original"},"downloadUrl":"/tools/cad-library/download/weidmueller-article-2658590000/native-bbd86b8fca420a288c2c5366-zip","customerPrice":0}],"equipmentFacts":[{"label":"Equipment / resource","value":"S-3L-320/10 — Cross-connector for terminal block / Cross-connector (terminal) Number of poles: 18, Pitch in mm: 17.80, 63 A, grey"},{"label":"Manufacturer","value":"Weidmüller"},{"label":"Resource type","value":"Product"},{"label":"Part number","value":"2658590000"},{"label":"Manufacturer reference","value":"2658590000"},{"label":"Manufacturer type","value":"S-3L-320/10"},{"label":"Available native formats","value":"DWG / DXF / STEP"},{"label":"Listed file formats","value":"DWG, DXF, STEP"},{"label":"Listed files","value":"3"},{"label":"Available previews","value":"2 drawing previews"},{"label":"Recorded revisions","value":"Confirm the revision with the manufacturer"},{"label":"Source checked","value":"2026-11-17"},{"label":"Download access","value":"Website downloads require email registration once. API trial: 50 files / 512 MiB daily; registered free: 1,000 files/month; verified existing paid plan: 10,000 files/month. Exclusive Elora conversions require a free CAD Library account; conversions without an access review are not released. Manufacturer requirements may apply."}],"previewImage":"/tools/cad-library/drawing-preview/weidmueller-article-2658590000/native-ef34ed015b52737366b0e06e-zip?asset=a113c36cf3c19499ef48118677e07d1f31b5e62543da8a813cbeb15db7b2a6ea","relatedReferences":[{"name":"Terminal strip assembly","url":"https://eloragrid.ai/objects/terminal-strip"},{"name":"Cable gland","url":"https://eloragrid.ai/objects/ga-cable-gland"}],"fileChoiceGuidance":["Start with 2658590000. The files above belong to Weidmüller's S-3L-320/10 — Cross-connector for terminal block / Cross-connector (terminal) Number of poles: 18, Pitch in mm: 17.80, 63 A, grey resource; match any model or option suffix in the filename to your selected unit.","Available here: STEP, ZIP. The individual filenames above distinguish the supplied variants."],"plainEnglish":{"title":"What the equipment does","introduction":"A terminal provides an identified point for joining wires to equipment or to other wires. Terminal strips organise those connections so they can be wired and checked.","example":"In a substation relay panel, numbered terminals connect the switchyard cables to the protection and control equipment.","drawings":"Use an outline or mounting drawing to plan where the equipment fits and where it attaches. Use a connection drawing to trace its electrical interfaces. A 3D model helps coordinate space; check the manufacturer's installation requirements separately.","terms":[{"name":"CAD","meaning":"Computer-aided design files used to prepare drawings and models."},{"name":"Revision","meaning":"The recorded version of a drawing or model."}],"diagram":"flow","steps":["Field wiring","Identified terminal connections","Panel equipment"],"caption":"A simplified explanation of how this item works. It does not show terminal wiring or an operating procedure.","sources":[{"label":"Weidmüller official source","url":"https://eshop.weidmueller.com.cn/en/s-3l-32010/p/2658590000/downloads#engineering-support"}],"profileId":"terminal"},"canonicalUrl":"https://eloragrid.ai/tools/cad-library/equipment/weidmueller-article-2658590000"}