{"schemaVersion":1,"slug":"ansi-high-speed-relay","name":"ANSI/IEEE High-speed relay form","kind":"symbol","abbreviation":"K FAST","aliases":["HCR1HSP","VCR1HSP","IEEE High Speed","ANSI High-speed relay"],"category":"control-circuits","drawingTypes":["Schematic"],"referenceFamilies":["IEEE / ANSI","Manufacturer"],"summary":"IEEE-library form of high-speed relay: a high-speed relay has a documented operating response intended for duties where relay timing matters.","description":["This reference locates high-speed relay in Autodesk's IEEE-oriented relays and contacts family. A high-speed relay has a documented operating response intended for duties where relay timing matters. Schematics need the specific model and circuit role rather than an unqualified speed claim. The public library uses HCR1HSP for its horizontal representation; this is a vendor block name, not an IEEE standards symbol number.","Trace the measured quantity or initiating control signal separately from the output contacts. The device tag links the sensing or operating element to the controlled circuit; settings, reset behaviour and the actual terminal arrangement belong in the selected equipment documentation.","Read operate and release times under the specified coil and contact conditions. High-speed classification does not imply a complete protection scheme's total clearing time. The linked functional counterpart explains the same operating role in its own drawing context; agreement of every detailed convention mark is not asserted."],"readingNotes":["Read operate and release times under the specified coil and contact conditions.","The preview is an original explanation of this function. Match the actual drawing convention to its legend and the selected equipment documentation."],"drawingChecklist":["Name relay model","Reference operate and release data","Show controlled circuit"],"distinction":"High-speed classification does not imply a complete protection scheme's total clearing time.","facts":[{"label":"Convention evidence","value":"Autodesk IEEE Symbol Preview: Relays and Contacts; published form: High Speed."},{"label":"Public vendor block","value":"HCR1HSP. Vendor library token, not an IEEE symbol number."},{"label":"Drawing role","value":"Relay operation"},{"label":"Identifier status","value":"The short label is a functional lookup label, not an assigned IEC or IEEE symbol number. Any separately listed Autodesk code is a verified vendor block name."},{"label":"Artwork scope","value":"Original educational geometry. Exact standard graphics, product ratings and terminal pinouts are not certified."}],"references":[{"sourceId":"ansi-autodesk-f8eac387-53cf-45fe-be6a-c0c8fb3c1b22","relevance":"Public IEEE-oriented Relays and Contacts table explicitly lists HCR1HSP as High Speed. This supports the vendor convention context, not reproduction of the publisher graphic."}],"related":["high-speed-relay","relay-coil","normally-open-contact"],"artwork":"s28-ansi-high-speed-relay","publishedOn":"2026-10-28","updatedOn":"2026-10-28","provenance":"independent-public-research","symbolVariant":{"convention":"IEEE / ANSI","form":"High Speed","reference":"Autodesk IEEE Symbol Preview: Relays and Contacts, block HCR1HSP. Matching functional counterpart linked separately. Independently drawn educational geometry; not a certified IEEE glyph or database identifier.","counterpart":"high-speed-relay"},"plainEnglish":{"title":"What does ANSI/IEEE High-speed relay form mean?","introduction":"This reference locates high-speed relay in Autodesk's IEEE-oriented relays and contacts family. A high-speed relay has a documented operating response intended for duties where relay timing matters. Schematics need the specific model and circuit role rather than an unqualified speed claim. The public library uses HCR1HSP for its horizontal representation; this is a vendor block name, not an IEEE standards symbol number.","example":"Trace the measured quantity or initiating control signal separately from the output contacts. The device tag links the sensing or operating element to the controlled circuit; settings, reset behaviour and the actual terminal arrangement belong in the selected equipment documentation.","drawings":"Read operate and release times under the specified coil and contact conditions. High-speed classification does not imply a complete protection scheme's total clearing time. The linked functional counterpart explains the same operating role in its own drawing context; agreement of every detailed convention mark is not asserted.","terms":[{"name":"Normally open / normally closed","meaning":"The contact state in the normal condition defined for the drawing."},{"name":"Coil","meaning":"A wound conductor that can produce a magnetic field when energised."},{"name":"Terminal","meaning":"An identified point where a conductor connects."}],"diagram":"flow","steps":["Identify the device and form","Read the connections and state","Check the equipment reference"],"caption":"A guide to reading this reference. The original symbol illustration and its drawing notes appear below; these boxes are not a wiring diagram.","sources":[{"label":"Autodesk IEEE Symbol Preview — Relays and Contacts","url":"https://help.autodesk.com/cloudhelp/2021/ENU/AutoCAD-Electrical/files/GUID-F8EAC387-53CF-45FE-BE6A-C0C8FB3C1B22.htm"}],"detail":"IEEE-library form of high-speed relay: a high-speed relay has a documented operating response intended for duties where relay timing matters. High-speed classification does not imply a complete protection scheme's total clearing time.","profileId":"reviewed-symbol-20261028"},"url":"https://eloragrid.ai/symbols/ansi-high-speed-relay","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/illustrations/ansi-high-speed-relay.svg","scope":"Original educational concept; not an official standard graphic or product footprint","license":"https://creativecommons.org/licenses/by/4.0/"},"sources":[{"id":"ansi-autodesk-f8eac387-53cf-45fe-be6a-c0c8fb3c1b22","title":"Autodesk IEEE Symbol Preview — Relays and Contacts","publisher":"Autodesk","url":"https://help.autodesk.com/cloudhelp/2021/ENU/AutoCAD-Electrical/files/GUID-F8EAC387-53CF-45FE-BE6A-C0C8FB3C1B22.htm","type":"cad-reference","scope":"Verified public IEEE-oriented vendor catalogue. Block names identify vendor symbols, not IEEE standard symbol numbers. Linked only; graphics and CAD files are not redistributed. IEEE/ANSI 315-1975 is a historical graphics reference with Inactive-Reserved status; this page does not certify current standards compliance.","checkedOn":"2026-10-14","reuse":"link-only","relevance":"Public IEEE-oriented Relays and Contacts table explicitly lists HCR1HSP as High Speed. This supports the vendor convention context, not reproduction of the publisher graphic."}]}