# Automatic voltage-regulator enable

Canonical URL: https://eloragrid.ai/symbols/automatic-voltage-regulator-enable
Publisher: Elora Grid
Updated: 2026-11-03
Lookup label: AVE
Drawing use: Schematic
Reference families: Manufacturer

Representation: Functional block
Installation focus: substations
Input: Regulator authority and health
Output: Automatic regulation permission

Selects whether the defined regulator may issue automatic tap-change requests.

## In plain English

### What this block does

Selects whether the defined regulator may issue automatic tap-change requests.

### A simple example

In a substation, a voltage regulator can request a tap change and check the resulting tap-position feedback. A separate controller stages cooling equipment according to the transformer manufacturer's defined conditions. For this reference, the drawing identifies “Regulator authority and health” at the input and “Automatic regulation permission” at the output. Manual authority remains separately defined.

### What the drawings help you do

Start at the named input: Regulator authority and health. Identify its source device or document and the state represented on the drawing. Follow the named output: Automatic regulation permission. Cross-reference its destination and separate the command from confirmation that the equipment responded.

### Terms

- Input: Regulator authority and health
- Output: Automatic regulation permission
- Application reference: An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.

Concept diagram: Regulator authority and health → AVE → Automatic regulation permission
A reading guide. The entry's original illustration and input/output facts describe this application.

- [SEL-2414 transformer monitor](https://selinc.com/products/2414/)


## What it represents

Selects whether the defined regulator may issue automatic tap-change requests. Transformer regulation changes the selected winding connection to influence voltage, while cooling control manages the installed fans and pumps. Commands, mechanical position and measured results belong to different parts of the diagram.
In a substation, a voltage regulator can request a tap change and check the resulting tap-position feedback. A separate controller stages cooling equipment according to the transformer manufacturer's defined conditions. For this reference, the drawing identifies “Regulator authority and health” at the input and “Automatic regulation permission” at the output. Manual authority remains separately defined.
Keep tap-change permission, limit contacts, movement indication and measured voltage distinct. Actual tap positions, time delays, cooling ratings and allowable parallel operation require the selected transformer control design. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.

## How to read it

- Start at the named input: Regulator authority and health. Identify its source device or document and the state represented on the drawing.
- Follow the named output: Automatic regulation permission. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Manual authority remains separately defined.
- Keep tap-change permission, limit contacts, movement indication and measured voltage distinct. Actual tap positions, time delays, cooling ratings and allowable parallel operation require the selected transformer control design.

## Information to show or reference

- Label the source and connection reference for regulator authority and health.
- Identify the destination and defined state of automatic regulation permission.
- Record the equipment or control-document revision supporting this functional block.
- Check this application limit in the project design: Manual authority remains separately defined.

## Important distinction

Manual authority remains separately defined. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.

## Facts

- Representation: Functional block
- Installation focus: Substations
- Input / boundary: Regulator authority and health
- Output / connection: Automatic regulation permission
- Lookup label: AVE is a library lookup label, not a standard device designation.

## Public references

- [SEL-2414 transformer monitor](https://selinc.com/products/2414/) — SEL. Public technical context for transformer regulation and cooling control. Transformer temperature, cooling, tap changing and parallel operation. The application text and educational graphic are independently authored; the publisher does not certify this representation.

## Graphic scope

Independent original educational concept illustration by Elora Grid. Not a certified standards graphic or manufacturer footprint. Unitless; not to scale. Original artwork licence: https://creativecommons.org/licenses/by/4.0/. Publisher material is linked only.