# Bay primary-to-secondary cross-reference

Canonical URL: https://eloragrid.ai/symbols/bay-primary-to-secondary-cross-reference
Publisher: Elora Grid
Updated: 2026-11-03
Lookup label: BPC
Drawing use: Schematic
Reference families: Manufacturer

Representation: Functional block
Installation focus: switchyards
Input: Primary device identities
Output: Secondary drawing references

Links primary switching and measurement device tags to their associated control and protection drawings.

## In plain English

### What this block does

Links primary switching and measurement device tags to their associated control and protection drawings.

### A simple example

In a switchyard single-line drawing, the bay arrangement helps the reader follow the circuit from its bus connection to the external line, transformer or compensation equipment and identify the measurement boundaries along the path. For this reference, the drawing identifies “Primary device identities” at the input and “Secondary drawing references” at the output. Both drawing revisions must describe the same equipment.

### What the drawings help you do

Start at the named input: Primary device identities. Identify its source device or document and the state represented on the drawing. Follow the named output: Secondary drawing references. Cross-reference its destination and separate the command from confirmation that the equipment responded.

### Terms

- Input: Primary device identities
- Output: Secondary drawing references
- Application reference: An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.

Concept diagram: Primary device identities → BPC → Secondary drawing references
A reading guide. The entry's original illustration and input/output facts describe this application.

- [SEL-451 protection, automation and bay control](https://selinc.com/products/451/)


## What it represents

Links primary switching and measurement device tags to their associated control and protection drawings. A bay circuit arrangement groups the switching, measuring and protection interfaces associated with a specific network circuit. A line bay, transformer bay and reactor bay share some devices but connect different kinds of primary equipment.
In a switchyard single-line drawing, the bay arrangement helps the reader follow the circuit from its bus connection to the external line, transformer or compensation equipment and identify the measurement boundaries along the path. For this reference, the drawing identifies “Primary device identities” at the input and “Secondary drawing references” at the output. Both drawing revisions must describe the same equipment.
Preserve the actual order of primary connections, isolation points and CT locations. These conceptual arrangements do not establish equipment clearances, terminal layouts or an approved switching sequence. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.

## How to read it

- Start at the named input: Primary device identities. Identify its source device or document and the state represented on the drawing.
- Follow the named output: Secondary drawing references. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Both drawing revisions must describe the same equipment.
- Preserve the actual order of primary connections, isolation points and CT locations. These conceptual arrangements do not establish equipment clearances, terminal layouts or an approved switching sequence.

## Information to show or reference

- Label the source and connection reference for primary device identities.
- Identify the destination and defined state of secondary drawing references.
- Record the equipment or control-document revision supporting this functional block.
- Check this application limit in the project design: Both drawing revisions must describe the same equipment.

## Important distinction

Both drawing revisions must describe the same equipment. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.

## Facts

- Representation: Functional block
- Installation focus: Switchyards
- Input / boundary: Primary device identities
- Output / connection: Secondary drawing references
- Lookup label: BPC is a library lookup label, not a standard device designation.

## Public references

- [SEL-451 protection, automation and bay control](https://selinc.com/products/451/) — SEL. Public technical context for switchyard bay circuit arrangements. Bay arrangements and coordinated breaker controls. The application text and educational graphic are independently authored; the publisher does not certify this representation.

## Graphic scope

Independent original educational concept illustration by Elora Grid. Not a certified standards graphic or manufacturer footprint. Unitless; not to scale. Original artwork licence: https://creativecommons.org/licenses/by/4.0/. Publisher material is linked only.