# Broken-delta residual input interface

Canonical URL: https://eloragrid.ai/symbols/broken-delta-residual-input-interface
Publisher: Elora Grid
Updated: 2026-11-03
Lookup label: BRII
Drawing use: Schematic
Reference families: Manufacturer

Representation: Functional block
Installation focus: substations
Input: Broken-delta secondary output
Output: Residual relay voltage

Carries the documented broken-delta winding output to the selected residual-voltage input.

## In plain English

### What this block does

Carries the documented broken-delta winding output to the selected residual-voltage input.

### A simple example

In a substation bay, one voltage circuit can feed protection while a separately identified winding supplies metering. A voltage-selection circuit must make clear which bus or line measurement is being used. For this reference, the drawing identifies “Broken-delta secondary output” at the input and “Residual relay voltage” at the output. The source winding connection must be identified.

### What the drawings help you do

Start at the named input: Broken-delta secondary output. Identify its source device or document and the state represented on the drawing. Follow the named output: Residual relay voltage. Cross-reference its destination and separate the command from confirmation that the equipment responded.

### Terms

- Input: Broken-delta secondary output
- Output: Residual relay voltage
- Application reference: An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.

Concept diagram: Broken-delta secondary output → BRII → Residual relay voltage
A reading guide. The entry's original illustration and input/output facts describe this application.

- [Indoor current and voltage transformers](https://www.abb.com/gb/en/areas/electrification/medium-voltage/grid-components/core-components/indoor-instrument-transformers)


## What it represents

Carries the documented broken-delta winding output to the selected residual-voltage input. A voltage-transformer secondary arrangement connects a defined primary voltage measurement to protection, metering or control inputs. Winding identity, fuse protection and the voltage reference must remain visible across the drawing.
In a substation bay, one voltage circuit can feed protection while a separately identified winding supplies metering. A voltage-selection circuit must make clear which bus or line measurement is being used. For this reference, the drawing identifies “Broken-delta secondary output” at the input and “Residual relay voltage” at the output. The source winding connection must be identified.
Show the primary measurement point, secondary connection, protective devices and relay reference. A missing measurement can resemble a real system disturbance unless the voltage-circuit health is supervised appropriately. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.

## How to read it

- Start at the named input: Broken-delta secondary output. Identify its source device or document and the state represented on the drawing.
- Follow the named output: Residual relay voltage. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- The source winding connection must be identified.
- Show the primary measurement point, secondary connection, protective devices and relay reference. A missing measurement can resemble a real system disturbance unless the voltage-circuit health is supervised appropriately.

## Information to show or reference

- Label the source and connection reference for broken-delta secondary output.
- Identify the destination and defined state of residual relay voltage.
- Record the equipment or control-document revision supporting this functional block.
- Check this application limit in the project design: The source winding connection must be identified.

## Important distinction

The source winding connection must be identified. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.

## Facts

- Representation: Functional block
- Installation focus: Substations
- Input / boundary: Broken-delta secondary output
- Output / connection: Residual relay voltage
- Lookup label: BRII is a library lookup label, not a standard device designation.

## Public references

- [Indoor current and voltage transformers](https://www.abb.com/gb/en/areas/electrification/medium-voltage/grid-components/core-components/indoor-instrument-transformers) — ABB. Public technical context for voltage-transformer secondary arrangements. Current and voltage measurement transformers and their secondary interfaces. The application text and educational graphic are independently authored; the publisher does not certify this representation.

## Graphic scope

Independent original educational concept illustration by Elora Grid. Not a certified standards graphic or manufacturer footprint. Unitless; not to scale. Original artwork licence: https://creativecommons.org/licenses/by/4.0/. Publisher material is linked only.