{"schemaVersion":1,"slug":"fire-system-equipment-shutdown-request","name":"Fire-system equipment shutdown request","kind":"symbol","abbreviation":"FESR","aliases":["Switchroom fire and emergency interfaces","switchrooms Switchroom fire and emergency interfaces","switchrooms","Switchrooms","Fire shutdown output","Assigned equipment stop request"],"category":"installation-communications","drawingTypes":["Schematic"],"referenceFamilies":["Manufacturer"],"summary":"Identifies the separately defined shutdown output from the fire cause-and-effect system.","description":["Identifies the separately defined shutdown output from the fire cause-and-effect system. A fire-system interface passes defined indications and control requests between the fire installation and electrical equipment. The receiving circuit must identify the exact purpose of the signal and the equipment it affects.","In a switchroom, the fire panel may report detection, system faults and a separately documented shutdown request to the station controller. These signals have different meanings and must not be combined into one unexplained alarm. For this reference, the drawing identifies “Fire shutdown output” at the input and “Assigned equipment stop request” at the output. The exact equipment scope must be stated.","Use the coordinated fire cause-and-effect schedule to define each response. Original interface blocks describe signal roles without specifying suppression operation, evacuation behavior or life-safety performance. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation."],"readingNotes":["Start at the named input: Fire shutdown output. Identify its source device or document and the state represented on the drawing.","Follow the named output: Assigned equipment stop request. Cross-reference its destination and separate the command from confirmation that the equipment responded.","The exact equipment scope must be stated.","Use the coordinated fire cause-and-effect schedule to define each response. Original interface blocks describe signal roles without specifying suppression operation, evacuation behavior or life-safety performance."],"drawingChecklist":["Label the source and connection reference for fire shutdown output.","Identify the destination and defined state of assigned equipment stop request.","Record the equipment or control-document revision supporting this functional block.","Check this application limit in the project design: The exact equipment scope must be stated."],"distinction":"The exact equipment scope must be stated. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.","facts":[{"label":"Representation","value":"Functional block"},{"label":"Installation focus","value":"Switchrooms"},{"label":"Input / boundary","value":"Fire shutdown output"},{"label":"Output / connection","value":"Assigned equipment stop request"},{"label":"Lookup label","value":"FESR is a library lookup label, not a standard device designation."}],"references":[{"sourceId":"pi26-room-services","relevance":"Public technical context for switchroom fire and emergency interfaces. Lighting, emergency lighting, fire provisions and substation auxiliary services. Original cause-and-effect examples require project design. The application text and educational graphic are independently authored; the publisher does not certify this representation."}],"related":["iec-fire-alarm-control-panel-plan-symbol","ga-battery-fire-system-interface-panel","battery-room-gas-alarm-interface"],"artwork":"pi26-fire-system-equipment-shutdown-request","publishedOn":"2026-11-03","updatedOn":"2026-11-03","provenance":"independent-public-research","representation":{"type":"functional-block","focus":"switchrooms","family":"fire-interfaces","input":"Fire shutdown output","output":"Assigned equipment stop request"},"plainEnglish":{"title":"What this block does","introduction":"Identifies the separately defined shutdown output from the fire cause-and-effect system.","example":"In a switchroom, the fire panel may report detection, system faults and a separately documented shutdown request to the station controller. These signals have different meanings and must not be combined into one unexplained alarm. For this reference, the drawing identifies “Fire shutdown output” at the input and “Assigned equipment stop request” at the output. The exact equipment scope must be stated.","drawings":"Start at the named input: Fire shutdown output. Identify its source device or document and the state represented on the drawing. Follow the named output: Assigned equipment stop request. Cross-reference its destination and separate the command from confirmation that the equipment responded.","terms":[{"name":"Input","meaning":"Fire shutdown output"},{"name":"Output","meaning":"Assigned equipment stop request"},{"name":"Application reference","meaning":"An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections."}],"diagram":"flow","steps":["Fire shutdown output","FESR","Assigned equipment stop request"],"caption":"A reading guide. The entry's original illustration and input/output facts describe this application.","sources":[{"label":"Indoor substation: lighting, fire and auxiliary services","url":"https://www.electrical-installation.org/enwiki/Indoor_substation"}],"profileId":"power-installation-fire-interfaces"},"url":"https://eloragrid.ai/symbols/fire-system-equipment-shutdown-request","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/illustrations/fire-system-equipment-shutdown-request.svg","scope":"Original educational concept; not an official standard graphic or product footprint","license":"https://creativecommons.org/licenses/by/4.0/"},"sources":[{"id":"pi26-room-services","publisher":"Schneider Electric","title":"Indoor substation: lighting, fire and auxiliary services","url":"https://www.electrical-installation.org/enwiki/Indoor_substation","scope":"Lighting, emergency lighting, fire provisions and substation auxiliary services. Original cause-and-effect examples require project design.","type":"manufacturer","checkedOn":"2026-11-03","reuse":"link-only","relevance":"Public technical context for switchroom fire and emergency interfaces. Lighting, emergency lighting, fire provisions and substation auxiliary services. Original cause-and-effect examples require project design. The application text and educational graphic are independently authored; the publisher does not certify this representation."}]}