# AutomationDirect C0-04AD-2 analogue input module

Canonical URL: https://eloragrid.ai/objects/ga-c0-04ad-2-5c82b2f7a3d3
Publisher: Elora Grid
Updated: 2026-10-29
Lookup label: C0-04AD-2
Drawing use: GA
Reference families: Manufacturer

C0-04AD-2 analogue input module arrangement: mounting, interface and service-space coordination.

## In plain English

### What it does

C0-04AD-2 is the drawing identifier for analogue input module in AutomationDirect's CLICK PLCs collection. An analogue input module brings continuously varying sensor information into a controller. Its physical connectors and mounting arrangement are different questions from the signal range configured in the control program.

### A simple example

For example, in a microgrid installation with a process-control panel receiving transmitter signals, use the C0-04AD-2 reference to coordinate field-signal terminals, module removal and the controller connection. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.

### What the drawings help you do

Use the reviewed native drawing identified as PLC Families/CLICK/C0-04AD-2.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.

### Before using this reference

- Match C0-04AD-2, the native drawing identity and the project equipment schedule.
- Identify sensor cable groups and their marshalling terminals.
- Coordinate field-signal terminals, module removal and the controller connection with neighbouring equipment.
- Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details.

### Terms

- Drawing identity: The named manufacturer drawing used to identify the intended physical configuration.
- Interface: The place where this part mounts, connects or meets another selected part.
- Service space: The area needed to reach, disconnect or remove the selected equipment as instructed.

Concept diagram: Identify C0-04AD-2 → Coordinate analogue input module → Confirm the selected installation
A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.

- [AutomationDirect CLICK PLCs official CAD source](https://support.automationdirect.com/docs/drawings.html)


## What it represents

C0-04AD-2 is the drawing identifier for analogue input module in AutomationDirect's CLICK PLCs collection. An analogue input module brings continuously varying sensor information into a controller. Its physical connectors and mounting arrangement are different questions from the signal range configured in the control program.
For example, in a process-control panel receiving transmitter signals, use the C0-04AD-2 reference to coordinate field-signal terminals, module removal and the controller connection. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.
Use the reviewed native drawing identified as PLC Families/CLICK/C0-04AD-2.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.

## How to read it

- Keep field-signal terminals, module removal and the controller connection visible in the layout.
- This reference concerns the named C0-04AD-2 drawing and its analogue input module role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.

## Information to show or reference

- Match C0-04AD-2, the native drawing identity and the project equipment schedule.
- Identify sensor cable groups and their marshalling terminals.
- Coordinate field-signal terminals, module removal and the controller connection with neighbouring equipment.
- Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details.

## Important distinction

This reference concerns the named C0-04AD-2 drawing and its analogue input module role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.

## Facts

- Manufacturer source: AutomationDirect
- Native drawing identity: C0-04AD-2
- Reviewed equipment role: analogue input module
- CAD scope: CLICK PLCs
- Preview scope: Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale

## Public references

- [AutomationDirect CLICK PLCs official CAD source](https://support.automationdirect.com/docs/drawings.html) — AutomationDirect. Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family.

## Graphic scope

No standalone 2D icon is supplied. Manufacturer drawings are shown only where an exact source match is available. Other equipment previews are 3D thumbnails, not dimensional drawings.