# AutomationDirect C0-08SIM controller input simulator Canonical URL: https://eloragrid.ai/objects/ga-c0-08sim-ad0825a168f3 Publisher: Elora Grid Updated: 2026-10-29 Lookup label: C0-08SIM Drawing use: GA Reference families: Manufacturer C0-08SIM controller input simulator arrangement: mounting, interface and service-space coordination. ## In plain English ### What it does C0-08SIM is the drawing identifier for controller input simulator in AutomationDirect's CLICK PLCs collection. An input simulator lets a technician provide selected test input conditions to a compatible controller arrangement. It is a testing interface rather than a field-sensor input module for permanent process wiring. ### A simple example For example, in a microgrid installation with a controller commissioning test setup before field wiring is connected, use the C0-08SIM reference to coordinate test controls, compatible controller connection and access for removal. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement. ### What the drawings help you do Use the reviewed native drawing identified as PLC Families/CLICK/C0-08SIM.DWG for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details. ### Before using this reference - Match C0-08SIM, the native drawing identity and the project equipment schedule. - Identify the intended test arrangement and distinguish it from the final field-wiring configuration. - Coordinate test controls, compatible controller connection and access for removal with neighbouring equipment. - Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details. ### Terms - Drawing identity: The named manufacturer drawing used to identify the intended physical configuration. - Interface: The place where this part mounts, connects or meets another selected part. - Service space: The area needed to reach, disconnect or remove the selected equipment as instructed. Concept diagram: Identify C0-08SIM → Coordinate controller input simulator → Confirm the selected installation A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram. - [AutomationDirect CLICK PLCs official CAD source](https://support.automationdirect.com/docs/drawings.html) ## What it represents C0-08SIM is the drawing identifier for controller input simulator in AutomationDirect's CLICK PLCs collection. An input simulator lets a technician provide selected test input conditions to a compatible controller arrangement. It is a testing interface rather than a field-sensor input module for permanent process wiring. For example, in a workshop controller test setup before field wiring is connected, use the C0-08SIM reference to coordinate test controls, compatible controller connection and access for removal. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement. Use the reviewed native drawing identified as PLC Families/CLICK/C0-08SIM.DWG for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details. ## How to read it - Keep test controls, compatible controller connection and access for removal visible in the layout. - This reference concerns the named C0-08SIM drawing and its controller input simulator role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance. ## Information to show or reference - Match C0-08SIM, the native drawing identity and the project equipment schedule. - Identify the intended test arrangement and distinguish it from the final field-wiring configuration. - Coordinate test controls, compatible controller connection and access for removal with neighbouring equipment. - Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details. ## Important distinction This reference concerns the named C0-08SIM drawing and its controller input simulator role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance. ## Facts - Manufacturer source: AutomationDirect - Native drawing identity: C0-08SIM - Reviewed equipment role: controller input simulator - CAD scope: CLICK PLCs - Preview scope: Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale ## Public references - [AutomationDirect CLICK PLCs official CAD source](https://support.automationdirect.com/docs/drawings.html) — AutomationDirect. Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family. ## Graphic scope No standalone 2D icon is supplied. Manufacturer drawings are shown only where an exact source match is available. Other equipment previews are 3D thumbnails, not dimensional drawings.