{"schemaVersion":1,"slug":"ga-cl-2230-885e2b04f795","name":"AutomationDirect CL-2230 wire-retaining accessory","kind":"object","abbreviation":"CL-2230","aliases":["AutomationDirect CL-2230 wire-retaining accessory GA","CL-2230 general arrangement","CL-2230 equipment layout"],"category":"equipment-layouts","drawingTypes":["GA"],"referenceFamilies":["Manufacturer"],"summary":"CL-2230 wire-retaining accessory arrangement: mounting, interface and service-space coordination.","description":["CL-2230 is the drawing identifier for wire-retaining accessory in AutomationDirect's Wire Duct collection. A wire retainer helps hold conductors in the selected wiring-management arrangement. It is separate from the channel body and from the structural support of an external cable route.","For example, in a control-panel duct route that needs conductors retained during servicing, use the CL-2230 reference to coordinate duct interface, conductor space and cover access. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","Use the reviewed native drawing identified as Enclosures and Wiring/Wire Duct/Accessories/CL-2230.DWG for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details."],"readingNotes":["Keep duct interface, conductor space and cover access visible in the layout.","This reference concerns the named CL-2230 drawing and its wire-retaining accessory role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance."],"drawingChecklist":["Match CL-2230, the native drawing identity and the project equipment schedule.","Identify the compatible duct and the retainer installation position.","Coordinate duct interface, conductor space and cover access with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"distinction":"This reference concerns the named CL-2230 drawing and its wire-retaining accessory role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.","facts":[{"label":"Manufacturer source","value":"AutomationDirect"},{"label":"Native drawing identity","value":"CL-2230"},{"label":"Reviewed equipment role","value":"wire-retaining accessory"},{"label":"CAD scope","value":"Wire Duct"},{"label":"Preview scope","value":"Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale"}],"references":[{"sourceId":"double-ga-ad-wireduct","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}],"related":["ga-slotted-wiring-duct","ga-equipment-maintenance-envelope"],"artwork":"concept-ga-cl-2230-885e2b04f795","publishedOn":"2026-10-29","updatedOn":"2026-10-29","provenance":"independent-public-research","plainEnglish":{"title":"What it does","introduction":"CL-2230 is the drawing identifier for wire-retaining accessory in AutomationDirect's Wire Duct collection. A wire retainer helps hold conductors in the selected wiring-management arrangement. It is separate from the channel body and from the structural support of an external cable route.","example":"For example, in a microgrid installation with a control-panel duct route that needs conductors retained during servicing, use the CL-2230 reference to coordinate duct interface, conductor space and cover access. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","drawings":"Use the reviewed native drawing identified as Enclosures and Wiring/Wire Duct/Accessories/CL-2230.DWG for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.","checklist":["Match CL-2230, the native drawing identity and the project equipment schedule.","Identify the compatible duct and the retainer installation position.","Coordinate duct interface, conductor space and cover access with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"terms":[{"name":"Drawing identity","meaning":"The named manufacturer drawing used to identify the intended physical configuration."},{"name":"Interface","meaning":"The place where this part mounts, connects or meets another selected part."},{"name":"Service space","meaning":"The area needed to reach, disconnect or remove the selected equipment as instructed."}],"diagram":"flow","steps":["Identify CL-2230","Coordinate wire-retaining accessory","Confirm the selected installation"],"caption":"A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.","sources":[{"label":"AutomationDirect Wire Duct official CAD source","url":"https://support.automationdirect.com/docs/drawings.html"}],"profileId":"reviewed-electrical-equipment-20261029"},"url":"https://eloragrid.ai/objects/ga-cl-2230-885e2b04f795","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/equipment-preview/ga-cl-2230-885e2b04f795","scope":"Equipment preview: manufacturer drawing where available, otherwise a 3D thumbnail. Original object icon exports are removed."},"drawings":[],"sources":[{"id":"double-ga-ad-wireduct","title":"AutomationDirect Wire Duct official CAD source","publisher":"AutomationDirect","url":"https://support.automationdirect.com/docs/drawings.html","type":"manufacturer","scope":"Published source collection, exact native identities and physical component roles. No source geometry is reproduced in the educational artwork.","checkedOn":"2026-10-29","reuse":"link-only","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}]}