{"schemaVersion":1,"slug":"ga-dn-12j6y-f6d0cd5fc1f0","name":"AutomationDirect DN-12J6Y terminal jumper","kind":"object","abbreviation":"DN-12J6Y","aliases":["AutomationDirect DN-12J6Y terminal jumper GA","DN-12J6Y general arrangement","DN-12J6Y equipment layout"],"category":"equipment-layouts","drawingTypes":["GA"],"referenceFamilies":["Manufacturer"],"summary":"DN-12J6Y terminal jumper arrangement: mounting, interface and service-space coordination.","description":["DN-12J6Y is the drawing identifier for terminal jumper in AutomationDirect's DINnectors and DIN Rail collection. A terminal jumper makes a selected common connection between compatible terminal positions. Its mechanical reach and the positions connected must be checked against the actual terminal system.","For example, in a control-power terminal strip with a documented common distribution group, use the DN-12J6Y reference to coordinate jumper installation space, terminal positions and identification. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","Use the reviewed native drawing identified as Other PLC Products/DINnectors/Jumpers/DN-12J6Y.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details."],"readingNotes":["Keep jumper installation space, terminal positions and identification visible in the layout.","This reference concerns the named DN-12J6Y drawing and its terminal jumper role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance."],"drawingChecklist":["Match DN-12J6Y, the native drawing identity and the project equipment schedule.","Mark the exact connected positions and compatible terminal system.","Coordinate jumper installation space, terminal positions and identification with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"distinction":"This reference concerns the named DN-12J6Y drawing and its terminal jumper role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.","facts":[{"label":"Manufacturer source","value":"AutomationDirect"},{"label":"Native drawing identity","value":"DN-12J6Y"},{"label":"Reviewed equipment role","value":"terminal jumper"},{"label":"CAD scope","value":"DINnectors and DIN Rail"},{"label":"Preview scope","value":"Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale"}],"references":[{"sourceId":"double-ga-ad-dinnectors","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}],"related":["ga-feed-through-terminal-block","ga-equipment-maintenance-envelope"],"artwork":"concept-ga-dn-12j6y-f6d0cd5fc1f0","publishedOn":"2026-10-29","updatedOn":"2026-10-29","provenance":"independent-public-research","plainEnglish":{"title":"What it does","introduction":"DN-12J6Y is the drawing identifier for terminal jumper in AutomationDirect's DINnectors and DIN Rail collection. A terminal jumper makes a selected common connection between compatible terminal positions. Its mechanical reach and the positions connected must be checked against the actual terminal system.","example":"For example, in a microgrid installation with a control-power terminal strip with a documented common distribution group, use the DN-12J6Y reference to coordinate jumper installation space, terminal positions and identification. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","drawings":"Use the reviewed native drawing identified as Other PLC Products/DINnectors/Jumpers/DN-12J6Y.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.","checklist":["Match DN-12J6Y, the native drawing identity and the project equipment schedule.","Mark the exact connected positions and compatible terminal system.","Coordinate jumper installation space, terminal positions and identification with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"terms":[{"name":"Drawing identity","meaning":"The named manufacturer drawing used to identify the intended physical configuration."},{"name":"Interface","meaning":"The place where this part mounts, connects or meets another selected part."},{"name":"Service space","meaning":"The area needed to reach, disconnect or remove the selected equipment as instructed."}],"diagram":"flow","steps":["Identify DN-12J6Y","Coordinate terminal jumper","Confirm the selected installation"],"caption":"A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.","sources":[{"label":"AutomationDirect DINnectors and DIN Rail official CAD source","url":"https://support.automationdirect.com/docs/drawings.html"}],"profileId":"reviewed-electrical-equipment-20261029"},"url":"https://eloragrid.ai/objects/ga-dn-12j6y-f6d0cd5fc1f0","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/equipment-preview/ga-dn-12j6y-f6d0cd5fc1f0","scope":"Equipment preview: manufacturer drawing where available, otherwise a 3D thumbnail. Original object icon exports are removed."},"drawings":[],"sources":[{"id":"double-ga-ad-dinnectors","title":"AutomationDirect DINnectors and DIN Rail official CAD source","publisher":"AutomationDirect","url":"https://support.automationdirect.com/docs/drawings.html","type":"manufacturer","scope":"Published source collection, exact native identities and physical component roles. No source geometry is reproduced in the educational artwork.","checkedOn":"2026-10-29","reuse":"link-only","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}]}