{"schemaVersion":1,"slug":"ga-dn-g10-6c3090900040","name":"AutomationDirect DN-G10 protective-earth terminal","kind":"object","abbreviation":"DN-G10","aliases":["AutomationDirect DN-G10 protective-earth terminal GA","DN-G10 general arrangement","DN-G10 equipment layout"],"category":"equipment-layouts","drawingTypes":["GA"],"referenceFamilies":["Manufacturer"],"summary":"DN-G10 protective-earth terminal arrangement: mounting, interface and service-space coordination.","description":["DN-G10 is the drawing identifier for protective-earth terminal in AutomationDirect's DINnectors and DIN Rail collection. A protective-earth terminal provides the specified connection to the protective bonding system. Its installation must follow the selected product and mounting arrangement.","For example, in a cabinet bonding row beside the field cable entries, use the DN-G10 reference to coordinate earth conductor approach, mounting interface and identification. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","Use the reviewed native drawing identified as Other PLC Products/DINnectors/Ground Terminal Blocks/DN-G10.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details."],"readingNotes":["Keep earth conductor approach, mounting interface and identification visible in the layout.","This reference concerns the named DN-G10 drawing and its protective-earth terminal role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance."],"drawingChecklist":["Match DN-G10, the native drawing identity and the project equipment schedule.","Coordinate the protective-bonding route and compatible mounting system.","Coordinate earth conductor approach, mounting interface and identification with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"distinction":"This reference concerns the named DN-G10 drawing and its protective-earth terminal role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.","facts":[{"label":"Manufacturer source","value":"AutomationDirect"},{"label":"Native drawing identity","value":"DN-G10"},{"label":"Reviewed equipment role","value":"protective-earth terminal"},{"label":"CAD scope","value":"DINnectors and DIN Rail"},{"label":"Preview scope","value":"Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale"}],"references":[{"sourceId":"double-ga-ad-dinnectors","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}],"related":["ga-protective-earth-terminal-block","ga-equipment-maintenance-envelope"],"artwork":"concept-ga-dn-g10-6c3090900040","publishedOn":"2026-10-29","updatedOn":"2026-10-29","provenance":"independent-public-research","plainEnglish":{"title":"What it does","introduction":"DN-G10 is the drawing identifier for protective-earth terminal in AutomationDirect's DINnectors and DIN Rail collection. A protective-earth terminal provides the specified connection to the protective bonding system. Its installation must follow the selected product and mounting arrangement.","example":"For example, in a microgrid installation with a cabinet bonding row beside the field cable entries, use the DN-G10 reference to coordinate earth conductor approach, mounting interface and identification. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","drawings":"Use the reviewed native drawing identified as Other PLC Products/DINnectors/Ground Terminal Blocks/DN-G10.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.","checklist":["Match DN-G10, the native drawing identity and the project equipment schedule.","Coordinate the protective-bonding route and compatible mounting system.","Coordinate earth conductor approach, mounting interface and identification with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"terms":[{"name":"Drawing identity","meaning":"The named manufacturer drawing used to identify the intended physical configuration."},{"name":"Interface","meaning":"The place where this part mounts, connects or meets another selected part."},{"name":"Service space","meaning":"The area needed to reach, disconnect or remove the selected equipment as instructed."}],"diagram":"flow","steps":["Identify DN-G10","Coordinate protective-earth terminal","Confirm the selected installation"],"caption":"A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.","sources":[{"label":"AutomationDirect DINnectors and DIN Rail official CAD source","url":"https://support.automationdirect.com/docs/drawings.html"}],"profileId":"reviewed-electrical-equipment-20261029"},"url":"https://eloragrid.ai/objects/ga-dn-g10-6c3090900040","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/equipment-preview/ga-dn-g10-6c3090900040","scope":"Equipment preview: manufacturer drawing where available, otherwise a 3D thumbnail. Original object icon exports are removed."},"drawings":[],"sources":[{"id":"double-ga-ad-dinnectors","title":"AutomationDirect DINnectors and DIN Rail official CAD source","publisher":"AutomationDirect","url":"https://support.automationdirect.com/docs/drawings.html","type":"manufacturer","scope":"Published source collection, exact native identities and physical component roles. No source geometry is reproduced in the educational artwork.","checkedOn":"2026-10-29","reuse":"link-only","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}]}