{"schemaVersion":1,"slug":"ga-e22asb106-3ce747fc9aa8","name":"AutomationDirect E22ASB106 emergency-stop station component","kind":"object","abbreviation":"E22ASB106","aliases":["AutomationDirect E22ASB106 emergency-stop station component GA","E22ASB106 general arrangement","E22ASB106 equipment layout"],"category":"equipment-layouts","drawingTypes":["GA"],"referenceFamilies":["Manufacturer"],"summary":"E22ASB106 emergency-stop station component arrangement: mounting, interface and service-space coordination.","description":["E22ASB106 is the drawing identifier for emergency-stop station component in AutomationDirect's 22mm Non-metal collection. An emergency-stop station component provides part of a machine stopping interface. Its mechanical placement does not establish the safety performance of the complete stopping circuit.","For example, in a machine installation with a clearly accessible stop station, use the E22ASB106 reference to coordinate operator approach, operating head and rear contact wiring. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","Use the reviewed native drawing identified as Pushbuttons Switches Indicators/22mm Non-metal/Eaton Cutler-Hammer E22 Series/E22ASB106.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details."],"readingNotes":["Keep operator approach, operating head and rear contact wiring visible in the layout.","This reference concerns the named E22ASB106 drawing and its emergency-stop station component role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance."],"drawingChecklist":["Match E22ASB106, the native drawing identity and the project equipment schedule.","Coordinate location with the machine safety design and exact station components.","Coordinate operator approach, operating head and rear contact wiring with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"distinction":"This reference concerns the named E22ASB106 drawing and its emergency-stop station component role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.","facts":[{"label":"Manufacturer source","value":"AutomationDirect"},{"label":"Native drawing identity","value":"E22ASB106"},{"label":"Reviewed equipment role","value":"emergency-stop station component"},{"label":"CAD scope","value":"22mm Non-metal"},{"label":"Preview scope","value":"Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale"}],"references":[{"sourceId":"double-ga-ad-22mm-nonmetal-pilot","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}],"related":["ga-emergency-stop-station","ga-equipment-maintenance-envelope"],"artwork":"concept-ga-e22asb106-3ce747fc9aa8","publishedOn":"2026-10-29","updatedOn":"2026-10-29","provenance":"independent-public-research","plainEnglish":{"title":"What it does","introduction":"E22ASB106 is the drawing identifier for emergency-stop station component in AutomationDirect's 22mm Non-metal collection. An emergency-stop station component provides part of a machine stopping interface. Its mechanical placement does not establish the safety performance of the complete stopping circuit.","example":"For example, in a microgrid installation with a machine installation with a clearly accessible stop station, use the E22ASB106 reference to coordinate operator approach, operating head and rear contact wiring. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","drawings":"Use the reviewed native drawing identified as Pushbuttons Switches Indicators/22mm Non-metal/Eaton Cutler-Hammer E22 Series/E22ASB106.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.","checklist":["Match E22ASB106, the native drawing identity and the project equipment schedule.","Coordinate location with the machine safety design and exact station components.","Coordinate operator approach, operating head and rear contact wiring with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"terms":[{"name":"Drawing identity","meaning":"The named manufacturer drawing used to identify the intended physical configuration."},{"name":"Interface","meaning":"The place where this part mounts, connects or meets another selected part."},{"name":"Service space","meaning":"The area needed to reach, disconnect or remove the selected equipment as instructed."}],"diagram":"flow","steps":["Identify E22ASB106","Coordinate emergency-stop station component","Confirm the selected installation"],"caption":"A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.","sources":[{"label":"AutomationDirect 22mm Non-metal official CAD source","url":"https://support.automationdirect.com/docs/drawings.html"}],"profileId":"reviewed-electrical-equipment-20261029"},"url":"https://eloragrid.ai/objects/ga-e22asb106-3ce747fc9aa8","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/equipment-preview/ga-e22asb106-3ce747fc9aa8","scope":"Equipment preview: manufacturer drawing where available, otherwise a 3D thumbnail. Original object icon exports are removed."},"drawings":[],"sources":[{"id":"double-ga-ad-22mm-nonmetal-pilot","title":"AutomationDirect 22mm Non-metal official CAD source","publisher":"AutomationDirect","url":"https://support.automationdirect.com/docs/drawings.html","type":"manufacturer","scope":"Published source collection, exact native identities and physical component roles. No source geometry is reproduced in the educational artwork.","checkedOn":"2026-10-29","reuse":"link-only","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}]}