{"schemaVersion":1,"slug":"ga-fp-01xx-tuer-handbetaetigung-3af4723c74ff","name":"Hensel FP_01xx_Tuer_Handbetaetigung enclosure door","kind":"object","abbreviation":"FP_01xx_Tuer_Handbetaetigung","aliases":["Hensel FP_01xx_Tuer_Handbetaetigung enclosure door GA","FP_01xx_Tuer_Handbetaetigung general arrangement","FP_01xx_Tuer_Handbetaetigung equipment layout"],"category":"equipment-layouts","drawingTypes":["GA"],"referenceFamilies":["Manufacturer"],"summary":"FP_01xx_Tuer_Handbetaetigung enclosure door arrangement: mounting, interface and service-space coordination.","description":["FP_01xx_Tuer_Handbetaetigung is the drawing identifier for enclosure door in Hensel's ENYSTAR enclosure and distribution-system STEP collection. An enclosure door provides access to the selected housing. Its full operating sweep, hinges, handles and attached equipment need to be coordinated with the space outside and inside the enclosure.","For example, in a cabinet beside another item of electrical equipment, use the FP_01xx_Tuer_Handbetaetigung reference to coordinate hinge movement, handle access and rear-mounted door equipment. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","Use the reviewed native drawing identified as ENYSTAR_Tueren/Handbetaetigung/FP_01xx_Tuer_Handbetaetigung.stp for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details."],"readingNotes":["Keep hinge movement, handle access and rear-mounted door equipment visible in the layout.","This reference concerns the named FP_01xx_Tuer_Handbetaetigung drawing and its enclosure door role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance."],"drawingChecklist":["Match FP_01xx_Tuer_Handbetaetigung, the native drawing identity and the project equipment schedule.","Show the required access position and adjacent obstructions.","Coordinate hinge movement, handle access and rear-mounted door equipment with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"distinction":"This reference concerns the named FP_01xx_Tuer_Handbetaetigung drawing and its enclosure door role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.","facts":[{"label":"Manufacturer source","value":"Hensel"},{"label":"Native drawing identity","value":"FP_01xx_Tuer_Handbetaetigung"},{"label":"Reviewed equipment role","value":"enclosure door"},{"label":"CAD scope","value":"ENYSTAR enclosure and distribution-system STEP"},{"label":"Preview scope","value":"Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale"}],"references":[{"sourceId":"double-ga-europe-hensel-enystar","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}],"related":["ga-enclosure-door-swing-envelope","ga-equipment-maintenance-envelope"],"artwork":"concept-ga-fp-01xx-tuer-handbetaetigung-3af4723c74ff","publishedOn":"2026-10-29","updatedOn":"2026-10-29","provenance":"independent-public-research","plainEnglish":{"title":"What it does","introduction":"FP_01xx_Tuer_Handbetaetigung is the drawing identifier for enclosure door in Hensel's ENYSTAR enclosure and distribution-system STEP collection. An enclosure door provides access to the selected housing. Its full operating sweep, hinges, handles and attached equipment need to be coordinated with the space outside and inside the enclosure.","example":"For example, in a microgrid installation with a cabinet beside another item of electrical equipment, use the FP_01xx_Tuer_Handbetaetigung reference to coordinate hinge movement, handle access and rear-mounted door equipment. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","drawings":"Use the reviewed native drawing identified as ENYSTAR_Tueren/Handbetaetigung/FP_01xx_Tuer_Handbetaetigung.stp for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.","checklist":["Match FP_01xx_Tuer_Handbetaetigung, the native drawing identity and the project equipment schedule.","Show the required access position and adjacent obstructions.","Coordinate hinge movement, handle access and rear-mounted door equipment with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"terms":[{"name":"Drawing identity","meaning":"The named manufacturer drawing used to identify the intended physical configuration."},{"name":"Interface","meaning":"The place where this part mounts, connects or meets another selected part."},{"name":"Service space","meaning":"The area needed to reach, disconnect or remove the selected equipment as instructed."}],"diagram":"flow","steps":["Identify FP_01xx_Tuer_Handbetaetigung","Coordinate enclosure door","Confirm the selected installation"],"caption":"A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.","sources":[{"label":"Hensel ENYSTAR enclosure and distribution-system STEP official CAD source","url":"https://www.hensel-electric.de/de-de/service/downloads/digitale-produktdaten/3d-step.php"}],"profileId":"reviewed-electrical-equipment-20261029"},"url":"https://eloragrid.ai/objects/ga-fp-01xx-tuer-handbetaetigung-3af4723c74ff","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/equipment-preview/ga-fp-01xx-tuer-handbetaetigung-3af4723c74ff","scope":"Equipment preview: manufacturer drawing where available, otherwise a 3D thumbnail. Original object icon exports are removed."},"drawings":[],"sources":[{"id":"double-ga-europe-hensel-enystar","title":"Hensel ENYSTAR enclosure and distribution-system STEP official CAD source","publisher":"Hensel","url":"https://www.hensel-electric.de/de-de/service/downloads/digitale-produktdaten/3d-step.php","type":"manufacturer","scope":"Published source collection, exact native identities and physical component roles. No source geometry is reproduced in the educational artwork.","checkedOn":"2026-10-29","reuse":"link-only","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}]}