{"schemaVersion":1,"slug":"ga-fp-ts-27-e76847d97d8e","name":"Hensel FP_TS_27 mounting-rail component","kind":"object","abbreviation":"FP_TS_27","aliases":["Hensel FP_TS_27 mounting-rail component GA","FP_TS_27 general arrangement","FP_TS_27 equipment layout"],"category":"equipment-layouts","drawingTypes":["GA"],"referenceFamilies":["Manufacturer"],"summary":"FP_TS_27 mounting-rail component arrangement: mounting, interface and service-space coordination.","description":["FP_TS_27 is the drawing identifier for mounting-rail component in Hensel's ENYSTAR enclosure and distribution-system STEP collection. A mounting-rail component supports compatible panel devices. The rail profile, mounting method and load support must be selected for the actual equipment arrangement.","For example, in a control-panel mounting plate carrying modular devices, use the FP_TS_27 reference to coordinate rail fixing points, device attachment and release access. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","Use the reviewed native drawing identified as ENYSTAR_Tragschienen/FP_TS_27.stp for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details."],"readingNotes":["Keep rail fixing points, device attachment and release access visible in the layout.","This reference concerns the named FP_TS_27 drawing and its mounting-rail component role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance."],"drawingChecklist":["Match FP_TS_27, the native drawing identity and the project equipment schedule.","Coordinate fixing locations and equipment removal rather than drawing an unsupported line.","Coordinate rail fixing points, device attachment and release access with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"distinction":"This reference concerns the named FP_TS_27 drawing and its mounting-rail component role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.","facts":[{"label":"Manufacturer source","value":"Hensel"},{"label":"Native drawing identity","value":"FP_TS_27"},{"label":"Reviewed equipment role","value":"mounting-rail component"},{"label":"CAD scope","value":"ENYSTAR enclosure and distribution-system STEP"},{"label":"Preview scope","value":"Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale"}],"references":[{"sourceId":"double-ga-europe-hensel-enystar","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}],"related":["ga-din-mounting-rail","ga-equipment-maintenance-envelope"],"artwork":"concept-ga-fp-ts-27-e76847d97d8e","publishedOn":"2026-10-29","updatedOn":"2026-10-29","provenance":"independent-public-research","plainEnglish":{"title":"What it does","introduction":"FP_TS_27 is the drawing identifier for mounting-rail component in Hensel's ENYSTAR enclosure and distribution-system STEP collection. A mounting-rail component supports compatible panel devices. The rail profile, mounting method and load support must be selected for the actual equipment arrangement.","example":"For example, in a microgrid installation with a control-panel mounting plate carrying modular devices, use the FP_TS_27 reference to coordinate rail fixing points, device attachment and release access. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","drawings":"Use the reviewed native drawing identified as ENYSTAR_Tragschienen/FP_TS_27.stp for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.","checklist":["Match FP_TS_27, the native drawing identity and the project equipment schedule.","Coordinate fixing locations and equipment removal rather than drawing an unsupported line.","Coordinate rail fixing points, device attachment and release access with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"terms":[{"name":"Drawing identity","meaning":"The named manufacturer drawing used to identify the intended physical configuration."},{"name":"Interface","meaning":"The place where this part mounts, connects or meets another selected part."},{"name":"Service space","meaning":"The area needed to reach, disconnect or remove the selected equipment as instructed."}],"diagram":"flow","steps":["Identify FP_TS_27","Coordinate mounting-rail component","Confirm the selected installation"],"caption":"A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.","sources":[{"label":"Hensel ENYSTAR enclosure and distribution-system STEP official CAD source","url":"https://www.hensel-electric.de/de-de/service/downloads/digitale-produktdaten/3d-step.php"}],"profileId":"reviewed-electrical-equipment-20261029"},"url":"https://eloragrid.ai/objects/ga-fp-ts-27-e76847d97d8e","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/equipment-preview/ga-fp-ts-27-e76847d97d8e","scope":"Equipment preview: manufacturer drawing where available, otherwise a 3D thumbnail. Original object icon exports are removed."},"drawings":[],"sources":[{"id":"double-ga-europe-hensel-enystar","title":"Hensel ENYSTAR enclosure and distribution-system STEP official CAD source","publisher":"Hensel","url":"https://www.hensel-electric.de/de-de/service/downloads/digitale-produktdaten/3d-step.php","type":"manufacturer","scope":"Published source collection, exact native identities and physical component roles. No source geometry is reproduced in the educational artwork.","checkedOn":"2026-10-29","reuse":"link-only","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}]}