{"schemaVersion":1,"slug":"ga-fp-vp-18-1ee149dccfd1","name":"Hensel FP_VP_18 enclosure closing plate","kind":"object","abbreviation":"FP_VP_18","aliases":["Hensel FP_VP_18 enclosure closing plate GA","FP_VP_18 general arrangement","FP_VP_18 equipment layout"],"category":"equipment-layouts","drawingTypes":["GA"],"referenceFamilies":["Manufacturer"],"summary":"FP_VP_18 enclosure closing plate arrangement: mounting, interface and service-space coordination.","description":["FP_VP_18 is the drawing identifier for enclosure closing plate in Hensel's ENYSTAR enclosure and distribution-system STEP collection. A closing plate closes the selected opening in an enclosure assembly. It is different from a project-defined cable-entry plate that has been modified for penetrations.","For example, in an enclosure configuration with a separately selected closure part, use the FP_VP_18 reference to coordinate plate fixing, sealing interface and removal access. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","Use the reviewed native drawing identified as ENYSTAR_Verschlussplatten/FP_VP_18.stp for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details."],"readingNotes":["Keep plate fixing, sealing interface and removal access visible in the layout.","This reference concerns the named FP_VP_18 drawing and its enclosure closing plate role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance."],"drawingChecklist":["Match FP_VP_18, the native drawing identity and the project equipment schedule.","Identify the exact opening and compatible enclosure arrangement.","Coordinate plate fixing, sealing interface and removal access with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"distinction":"This reference concerns the named FP_VP_18 drawing and its enclosure closing plate role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.","facts":[{"label":"Manufacturer source","value":"Hensel"},{"label":"Native drawing identity","value":"FP_VP_18"},{"label":"Reviewed equipment role","value":"enclosure closing plate"},{"label":"CAD scope","value":"ENYSTAR enclosure and distribution-system STEP"},{"label":"Preview scope","value":"Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale"}],"references":[{"sourceId":"double-ga-europe-hensel-enystar","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}],"related":["ga-enclosure-gland-plate","ga-equipment-maintenance-envelope"],"artwork":"concept-ga-fp-vp-18-1ee149dccfd1","publishedOn":"2026-10-29","updatedOn":"2026-10-29","provenance":"independent-public-research","plainEnglish":{"title":"What it does","introduction":"FP_VP_18 is the drawing identifier for enclosure closing plate in Hensel's ENYSTAR enclosure and distribution-system STEP collection. A closing plate closes the selected opening in an enclosure assembly. It is different from a project-defined cable-entry plate that has been modified for penetrations.","example":"For example, in a microgrid installation with an enclosure configuration with a separately selected closure part, use the FP_VP_18 reference to coordinate plate fixing, sealing interface and removal access. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","drawings":"Use the reviewed native drawing identified as ENYSTAR_Verschlussplatten/FP_VP_18.stp for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.","checklist":["Match FP_VP_18, the native drawing identity and the project equipment schedule.","Identify the exact opening and compatible enclosure arrangement.","Coordinate plate fixing, sealing interface and removal access with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"terms":[{"name":"Drawing identity","meaning":"The named manufacturer drawing used to identify the intended physical configuration."},{"name":"Interface","meaning":"The place where this part mounts, connects or meets another selected part."},{"name":"Service space","meaning":"The area needed to reach, disconnect or remove the selected equipment as instructed."}],"diagram":"flow","steps":["Identify FP_VP_18","Coordinate enclosure closing plate","Confirm the selected installation"],"caption":"A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.","sources":[{"label":"Hensel ENYSTAR enclosure and distribution-system STEP official CAD source","url":"https://www.hensel-electric.de/de-de/service/downloads/digitale-produktdaten/3d-step.php"}],"profileId":"reviewed-electrical-equipment-20261029"},"url":"https://eloragrid.ai/objects/ga-fp-vp-18-1ee149dccfd1","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/equipment-preview/ga-fp-vp-18-1ee149dccfd1","scope":"Equipment preview: manufacturer drawing where available, otherwise a 3D thumbnail. Original object icon exports are removed."},"drawings":[],"sources":[{"id":"double-ga-europe-hensel-enystar","title":"Hensel ENYSTAR enclosure and distribution-system STEP official CAD source","publisher":"Hensel","url":"https://www.hensel-electric.de/de-de/service/downloads/digitale-produktdaten/3d-step.php","type":"manufacturer","scope":"Published source collection, exact native identities and physical component roles. No source geometry is reproduced in the educational artwork.","checkedOn":"2026-10-29","reuse":"link-only","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}]}