# AutomationDirect KN-10J8 terminal jumper

Canonical URL: https://eloragrid.ai/objects/ga-kn-10j8-837e7671069c
Publisher: Elora Grid
Updated: 2026-10-29
Lookup label: KN-10J8
Drawing use: GA
Reference families: Manufacturer

KN-10J8 terminal jumper arrangement: mounting, interface and service-space coordination.

## In plain English

### What it does

KN-10J8 is the drawing identifier for terminal jumper in AutomationDirect's Konnect-It DIN-Rail Terminal Blocks collection. A terminal jumper makes a selected common connection between compatible terminal positions. Its mechanical reach and the positions connected must be checked against the actual terminal system.

### A simple example

For example, in a microgrid installation with a control-power terminal strip with a documented common distribution group, use the KN-10J8 reference to coordinate jumper installation space, terminal positions and identification. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.

### What the drawings help you do

Use the reviewed native drawing identified as Other PLC Products/Konnect-It/KN-10J8.DWG for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.

### Before using this reference

- Match KN-10J8, the native drawing identity and the project equipment schedule.
- Mark the exact connected positions and compatible terminal system.
- Coordinate jumper installation space, terminal positions and identification with neighbouring equipment.
- Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details.

### Terms

- Drawing identity: The named manufacturer drawing used to identify the intended physical configuration.
- Interface: The place where this part mounts, connects or meets another selected part.
- Service space: The area needed to reach, disconnect or remove the selected equipment as instructed.

Concept diagram: Identify KN-10J8 → Coordinate terminal jumper → Confirm the selected installation
A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.

- [AutomationDirect Konnect-It DIN-Rail Terminal Blocks official CAD source](https://support.automationdirect.com/docs/drawings.html)


## What it represents

KN-10J8 is the drawing identifier for terminal jumper in AutomationDirect's Konnect-It DIN-Rail Terminal Blocks collection. A terminal jumper makes a selected common connection between compatible terminal positions. Its mechanical reach and the positions connected must be checked against the actual terminal system.
For example, in a control-power terminal strip with a documented common distribution group, use the KN-10J8 reference to coordinate jumper installation space, terminal positions and identification. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.
Use the reviewed native drawing identified as Other PLC Products/Konnect-It/KN-10J8.DWG for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.

## How to read it

- Keep jumper installation space, terminal positions and identification visible in the layout.
- This reference concerns the named KN-10J8 drawing and its terminal jumper role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.

## Information to show or reference

- Match KN-10J8, the native drawing identity and the project equipment schedule.
- Mark the exact connected positions and compatible terminal system.
- Coordinate jumper installation space, terminal positions and identification with neighbouring equipment.
- Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details.

## Important distinction

This reference concerns the named KN-10J8 drawing and its terminal jumper role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.

## Facts

- Manufacturer source: AutomationDirect
- Native drawing identity: KN-10J8
- Reviewed equipment role: terminal jumper
- CAD scope: Konnect-It DIN-Rail Terminal Blocks
- Preview scope: Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale

## Public references

- [AutomationDirect Konnect-It DIN-Rail Terminal Blocks official CAD source](https://support.automationdirect.com/docs/drawings.html) — AutomationDirect. Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family.

## Graphic scope

No standalone 2D icon is supplied. Manufacturer drawings are shown only where an exact source match is available. Other equipment previews are 3D thumbnails, not dimensional drawings.