# AutomationDirect KN-ECDGRY terminal end cover Canonical URL: https://eloragrid.ai/objects/ga-kn-ecdgry-76e668167219 Publisher: Elora Grid Updated: 2026-10-29 Lookup label: KN-ECDGRY Drawing use: GA Reference families: Manufacturer KN-ECDGRY terminal end cover arrangement: mounting, interface and service-space coordination. ## In plain English ### What it does KN-ECDGRY is the drawing identifier for terminal end cover in AutomationDirect's Konnect-It DIN-Rail Terminal Blocks collection. An end cover closes the exposed side of the compatible terminal arrangement. It is different from an end bracket that mechanically locates the strip. ### A simple example For example, in a microgrid installation with a field-terminal strip with a defined end and accessible marking, use the KN-ECDGRY reference to coordinate terminal side face, neighbouring end restraint and marking. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement. ### What the drawings help you do Use the reviewed native drawing identified as Other PLC Products/Konnect-It/KN-ECDGRY.dwg, Other PLC Products/Konnect-It/KN-ECDBLK.dwg, Other PLC Products/Konnect-It/KN-ECDBLU.dwg, Other PLC Products/Konnect-It/KN-ECDGRN.dwg, Other PLC Products/Konnect-It/KN-ECDORG.dwg, Other PLC Products/Konnect-It/KN-ECDRED.dwg, Other PLC Products/Konnect-It/KN-ECDYEL.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details. ### Before using this reference - Match KN-ECDGRY, the native drawing identity and the project equipment schedule. - Identify the compatible terminal and the covered end of the assembly. - Coordinate terminal side face, neighbouring end restraint and marking with neighbouring equipment. - Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details. ### Terms - Drawing identity: The named manufacturer drawing used to identify the intended physical configuration. - Interface: The place where this part mounts, connects or meets another selected part. - Service space: The area needed to reach, disconnect or remove the selected equipment as instructed. Concept diagram: Identify KN-ECDGRY → Coordinate terminal end cover → Confirm the selected installation A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram. - [AutomationDirect Konnect-It DIN-Rail Terminal Blocks official CAD source](https://support.automationdirect.com/docs/drawings.html) ## What it represents KN-ECDGRY is the drawing identifier for terminal end cover in AutomationDirect's Konnect-It DIN-Rail Terminal Blocks collection. An end cover closes the exposed side of the compatible terminal arrangement. It is different from an end bracket that mechanically locates the strip. For example, in a field-terminal strip with a defined end and accessible marking, use the KN-ECDGRY reference to coordinate terminal side face, neighbouring end restraint and marking. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement. Use the reviewed native drawing identified as Other PLC Products/Konnect-It/KN-ECDGRY.dwg, Other PLC Products/Konnect-It/KN-ECDBLK.dwg, Other PLC Products/Konnect-It/KN-ECDBLU.dwg, Other PLC Products/Konnect-It/KN-ECDGRN.dwg, Other PLC Products/Konnect-It/KN-ECDORG.dwg, Other PLC Products/Konnect-It/KN-ECDRED.dwg, Other PLC Products/Konnect-It/KN-ECDYEL.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details. ## How to read it - Keep terminal side face, neighbouring end restraint and marking visible in the layout. - This reference concerns the named KN-ECDGRY drawing and its terminal end cover role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance. ## Information to show or reference - Match KN-ECDGRY, the native drawing identity and the project equipment schedule. - Identify the compatible terminal and the covered end of the assembly. - Coordinate terminal side face, neighbouring end restraint and marking with neighbouring equipment. - Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details. ## Important distinction This reference concerns the named KN-ECDGRY drawing and its terminal end cover role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance. ## Facts - Manufacturer source: AutomationDirect - Native drawing identity: KN-ECDGRY - Reviewed equipment role: terminal end cover - CAD scope: Konnect-It DIN-Rail Terminal Blocks - Preview scope: Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale ## Public references - [AutomationDirect Konnect-It DIN-Rail Terminal Blocks official CAD source](https://support.automationdirect.com/docs/drawings.html) — AutomationDirect. Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family. ## Graphic scope No standalone 2D icon is supplied. Manufacturer drawings are shown only where an exact source match is available. Other equipment previews are 3D thumbnails, not dimensional drawings.