{"schemaVersion":1,"slug":"ga-kn-ecf10-dca71fc1be60","name":"AutomationDirect KN-ECF10 terminal end cover","kind":"object","abbreviation":"KN-ECF10","aliases":["AutomationDirect KN-ECF10 terminal end cover GA","KN-ECF10 general arrangement","KN-ECF10 equipment layout"],"category":"equipment-layouts","drawingTypes":["GA"],"referenceFamilies":["Manufacturer"],"summary":"KN-ECF10 terminal end cover arrangement: mounting, interface and service-space coordination.","description":["KN-ECF10 is the drawing identifier for terminal end cover in AutomationDirect's Konnect-It DIN-Rail Terminal Blocks collection. An end cover closes the exposed side of the compatible terminal arrangement. It is different from an end bracket that mechanically locates the strip.","For example, in a field-terminal strip with a defined end and accessible marking, use the KN-ECF10 reference to coordinate terminal side face, neighbouring end restraint and marking. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","Use the reviewed native drawing identified as Other PLC Products/Konnect-It/KN-ECF10.DWG for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details."],"readingNotes":["Keep terminal side face, neighbouring end restraint and marking visible in the layout.","This reference concerns the named KN-ECF10 drawing and its terminal end cover role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance."],"drawingChecklist":["Match KN-ECF10, the native drawing identity and the project equipment schedule.","Identify the compatible terminal and the covered end of the assembly.","Coordinate terminal side face, neighbouring end restraint and marking with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"distinction":"This reference concerns the named KN-ECF10 drawing and its terminal end cover role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.","facts":[{"label":"Manufacturer source","value":"AutomationDirect"},{"label":"Native drawing identity","value":"KN-ECF10"},{"label":"Reviewed equipment role","value":"terminal end cover"},{"label":"CAD scope","value":"Konnect-It DIN-Rail Terminal Blocks"},{"label":"Preview scope","value":"Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale"}],"references":[{"sourceId":"double-ga-ad-konnect","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}],"related":["ga-terminal-end-stop","ga-equipment-maintenance-envelope"],"artwork":"concept-ga-kn-ecf10-dca71fc1be60","publishedOn":"2026-10-29","updatedOn":"2026-10-29","provenance":"independent-public-research","plainEnglish":{"title":"What it does","introduction":"KN-ECF10 is the drawing identifier for terminal end cover in AutomationDirect's Konnect-It DIN-Rail Terminal Blocks collection. An end cover closes the exposed side of the compatible terminal arrangement. It is different from an end bracket that mechanically locates the strip.","example":"For example, in a microgrid installation with a field-terminal strip with a defined end and accessible marking, use the KN-ECF10 reference to coordinate terminal side face, neighbouring end restraint and marking. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","drawings":"Use the reviewed native drawing identified as Other PLC Products/Konnect-It/KN-ECF10.DWG for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.","checklist":["Match KN-ECF10, the native drawing identity and the project equipment schedule.","Identify the compatible terminal and the covered end of the assembly.","Coordinate terminal side face, neighbouring end restraint and marking with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"terms":[{"name":"Drawing identity","meaning":"The named manufacturer drawing used to identify the intended physical configuration."},{"name":"Interface","meaning":"The place where this part mounts, connects or meets another selected part."},{"name":"Service space","meaning":"The area needed to reach, disconnect or remove the selected equipment as instructed."}],"diagram":"flow","steps":["Identify KN-ECF10","Coordinate terminal end cover","Confirm the selected installation"],"caption":"A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.","sources":[{"label":"AutomationDirect Konnect-It DIN-Rail Terminal Blocks official CAD source","url":"https://support.automationdirect.com/docs/drawings.html"}],"profileId":"reviewed-electrical-equipment-20261029"},"url":"https://eloragrid.ai/objects/ga-kn-ecf10-dca71fc1be60","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/equipment-preview/ga-kn-ecf10-dca71fc1be60","scope":"Equipment preview: manufacturer drawing where available, otherwise a 3D thumbnail. Original object icon exports are removed."},"drawings":[],"sources":[{"id":"double-ga-ad-konnect","title":"AutomationDirect Konnect-It DIN-Rail Terminal Blocks official CAD source","publisher":"AutomationDirect","url":"https://support.automationdirect.com/docs/drawings.html","type":"manufacturer","scope":"Published source collection, exact native identities and physical component roles. No source geometry is reproduced in the educational artwork.","checkedOn":"2026-10-29","reuse":"link-only","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}]}