# AutomationDirect KN-MA-5 terminal label holder

Canonical URL: https://eloragrid.ai/objects/ga-kn-ma-5-1e8bd299077a
Publisher: Elora Grid
Updated: 2026-10-29
Lookup label: KN-MA-5
Drawing use: GA
Reference families: Manufacturer

KN-MA-5 terminal label holder arrangement: mounting, interface and service-space coordination.

## In plain English

### What it does

KN-MA-5 is the drawing identifier for terminal label holder in AutomationDirect's Konnect-It DIN-Rail Terminal Blocks collection. A label holder supports identification material on the selected terminal assembly. It is a mechanical marking accessory rather than a conductor, jumper or rail section.

### A simple example

For example, in a microgrid installation with a field-terminal row where circuit identifiers must remain readable, use the KN-MA-5 reference to coordinate holder attachment, label visibility and adjacent terminal access. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.

### What the drawings help you do

Use the reviewed native drawing identified as Other PLC Products/Konnect-It/KN-MA-5.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.

### Before using this reference

- Match KN-MA-5, the native drawing identity and the project equipment schedule.
- Identify the compatible terminal system and selected identification material.
- Coordinate holder attachment, label visibility and adjacent terminal access with neighbouring equipment.
- Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details.

### Terms

- Drawing identity: The named manufacturer drawing used to identify the intended physical configuration.
- Interface: The place where this part mounts, connects or meets another selected part.
- Service space: The area needed to reach, disconnect or remove the selected equipment as instructed.

Concept diagram: Identify KN-MA-5 → Coordinate terminal label holder → Confirm the selected installation
A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.

- [AutomationDirect Konnect-It DIN-Rail Terminal Blocks official CAD source](https://support.automationdirect.com/docs/drawings.html)


## What it represents

KN-MA-5 is the drawing identifier for terminal label holder in AutomationDirect's Konnect-It DIN-Rail Terminal Blocks collection. A label holder supports identification material on the selected terminal assembly. It is a mechanical marking accessory rather than a conductor, jumper or rail section.
For example, in a field-terminal row where circuit identifiers must remain readable, use the KN-MA-5 reference to coordinate holder attachment, label visibility and adjacent terminal access. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.
Use the reviewed native drawing identified as Other PLC Products/Konnect-It/KN-MA-5.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.

## How to read it

- Keep holder attachment, label visibility and adjacent terminal access visible in the layout.
- This reference concerns the named KN-MA-5 drawing and its terminal label holder role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.

## Information to show or reference

- Match KN-MA-5, the native drawing identity and the project equipment schedule.
- Identify the compatible terminal system and selected identification material.
- Coordinate holder attachment, label visibility and adjacent terminal access with neighbouring equipment.
- Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details.

## Important distinction

This reference concerns the named KN-MA-5 drawing and its terminal label holder role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.

## Facts

- Manufacturer source: AutomationDirect
- Native drawing identity: KN-MA-5
- Reviewed equipment role: terminal label holder
- CAD scope: Konnect-It DIN-Rail Terminal Blocks
- Preview scope: Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale

## Public references

- [AutomationDirect Konnect-It DIN-Rail Terminal Blocks official CAD source](https://support.automationdirect.com/docs/drawings.html) — AutomationDirect. Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family.

## Graphic scope

No standalone 2D icon is supplied. Manufacturer drawings are shown only where an exact source match is available. Other equipment previews are 3D thumbnails, not dimensional drawings.