{"schemaVersion":1,"slug":"ga-p2-04da-1-4644e2f2c55e","name":"AutomationDirect P2-04DA-1 analogue output module","kind":"object","abbreviation":"P2-04DA-1","aliases":["AutomationDirect P2-04DA-1 analogue output module GA","P2-04DA-1 general arrangement","P2-04DA-1 equipment layout"],"category":"equipment-layouts","drawingTypes":["GA"],"referenceFamilies":["Manufacturer"],"summary":"P2-04DA-1 analogue output module arrangement: mounting, interface and service-space coordination.","description":["P2-04DA-1 is the drawing identifier for analogue output module in AutomationDirect's Productivity2000 PAC collection. An analogue output module sends a variable control signal to connected equipment. The equipment schedule and wiring design establish the actual output type and load.","For example, in a plant panel sending adjustable commands to a valve or drive, use the P2-04DA-1 reference to coordinate output-terminal approach, module removal and the controller connection. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","Use the reviewed native drawing identified as PLC Families/P2000/P2-04DA-1.DWG for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details."],"readingNotes":["Keep output-terminal approach, module removal and the controller connection visible in the layout.","This reference concerns the named P2-04DA-1 drawing and its analogue output module role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance."],"drawingChecklist":["Match P2-04DA-1, the native drawing identity and the project equipment schedule.","Identify the controlled device and output cable route.","Coordinate output-terminal approach, module removal and the controller connection with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"distinction":"This reference concerns the named P2-04DA-1 drawing and its analogue output module role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.","facts":[{"label":"Manufacturer source","value":"AutomationDirect"},{"label":"Native drawing identity","value":"P2-04DA-1"},{"label":"Reviewed equipment role","value":"analogue output module"},{"label":"CAD scope","value":"Productivity2000 PAC"},{"label":"Preview scope","value":"Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale"}],"references":[{"sourceId":"double-ga-ad-p2000","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}],"related":["ga-analogue-output-module","ga-equipment-maintenance-envelope"],"artwork":"concept-ga-p2-04da-1-4644e2f2c55e","publishedOn":"2026-10-29","updatedOn":"2026-10-29","provenance":"independent-public-research","plainEnglish":{"title":"What it does","introduction":"P2-04DA-1 is the drawing identifier for analogue output module in AutomationDirect's Productivity2000 PAC collection. An analogue output module sends a variable control signal to connected equipment. The equipment schedule and wiring design establish the actual output type and load.","example":"For example, in a microgrid installation with a plant panel sending adjustable commands to a valve or drive, use the P2-04DA-1 reference to coordinate output-terminal approach, module removal and the controller connection. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","drawings":"Use the reviewed native drawing identified as PLC Families/P2000/P2-04DA-1.DWG for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.","checklist":["Match P2-04DA-1, the native drawing identity and the project equipment schedule.","Identify the controlled device and output cable route.","Coordinate output-terminal approach, module removal and the controller connection with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"terms":[{"name":"Drawing identity","meaning":"The named manufacturer drawing used to identify the intended physical configuration."},{"name":"Interface","meaning":"The place where this part mounts, connects or meets another selected part."},{"name":"Service space","meaning":"The area needed to reach, disconnect or remove the selected equipment as instructed."}],"diagram":"flow","steps":["Identify P2-04DA-1","Coordinate analogue output module","Confirm the selected installation"],"caption":"A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.","sources":[{"label":"AutomationDirect Productivity2000 PAC official CAD source","url":"https://support.automationdirect.com/docs/drawings.html"}],"profileId":"reviewed-electrical-equipment-20261029"},"url":"https://eloragrid.ai/objects/ga-p2-04da-1-4644e2f2c55e","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/equipment-preview/ga-p2-04da-1-4644e2f2c55e","scope":"Equipment preview: manufacturer drawing where available, otherwise a 3D thumbnail. Original object icon exports are removed."},"drawings":[],"sources":[{"id":"double-ga-ad-p2000","title":"AutomationDirect Productivity2000 PAC official CAD source","publisher":"AutomationDirect","url":"https://support.automationdirect.com/docs/drawings.html","type":"manufacturer","scope":"Published source collection, exact native identities and physical component roles. No source geometry is reproduced in the educational artwork.","checkedOn":"2026-10-29","reuse":"link-only","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}]}