{"schemaVersion":1,"slug":"ga-p3-550-d362150a5551","name":"AutomationDirect P3-550 controller module","kind":"object","abbreviation":"P3-550","aliases":["AutomationDirect P3-550 controller module GA","P3-550 general arrangement","P3-550 equipment layout"],"category":"equipment-layouts","drawingTypes":["GA"],"referenceFamilies":["Manufacturer"],"summary":"P3-550 controller module arrangement: mounting, interface and service-space coordination.","description":["P3-550 is the drawing identifier for controller module in AutomationDirect's Productivity3000 PAC collection. A controller module runs a control program and exchanges information with its connected inputs, outputs and communications. The physical layout must still account for its exact mounting and connector positions.","For example, in a pump station where one controller coordinates the selected I/O, use the P3-550 reference to coordinate programming and communications plugs, I/O assembly and service removal. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","Use the reviewed native drawing identified as PLC Families/P3000/P3-550.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details."],"readingNotes":["Keep programming and communications plugs, I/O assembly and service removal visible in the layout.","This reference concerns the named P3-550 drawing and its controller module role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance."],"drawingChecklist":["Match P3-550, the native drawing identity and the project equipment schedule.","Identify the controller, adjacent modules and programming-access route.","Coordinate programming and communications plugs, I/O assembly and service removal with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"distinction":"This reference concerns the named P3-550 drawing and its controller module role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.","facts":[{"label":"Manufacturer source","value":"AutomationDirect"},{"label":"Native drawing identity","value":"P3-550"},{"label":"Reviewed equipment role","value":"controller module"},{"label":"CAD scope","value":"Productivity3000 PAC"},{"label":"Preview scope","value":"Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale"}],"references":[{"sourceId":"double-ga-ad-p3000pac","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}],"related":["ga-plc-cpu-module","ga-equipment-maintenance-envelope"],"artwork":"concept-ga-p3-550-d362150a5551","publishedOn":"2026-10-29","updatedOn":"2026-10-29","provenance":"independent-public-research","plainEnglish":{"title":"What it does","introduction":"P3-550 is the drawing identifier for controller module in AutomationDirect's Productivity3000 PAC collection. A controller module runs a control program and exchanges information with its connected inputs, outputs and communications. The physical layout must still account for its exact mounting and connector positions.","example":"For example, in a microgrid installation with a pump station where one controller coordinates the selected I/O, use the P3-550 reference to coordinate programming and communications plugs, I/O assembly and service removal. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","drawings":"Use the reviewed native drawing identified as PLC Families/P3000/P3-550.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.","checklist":["Match P3-550, the native drawing identity and the project equipment schedule.","Identify the controller, adjacent modules and programming-access route.","Coordinate programming and communications plugs, I/O assembly and service removal with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"terms":[{"name":"Drawing identity","meaning":"The named manufacturer drawing used to identify the intended physical configuration."},{"name":"Interface","meaning":"The place where this part mounts, connects or meets another selected part."},{"name":"Service space","meaning":"The area needed to reach, disconnect or remove the selected equipment as instructed."}],"diagram":"flow","steps":["Identify P3-550","Coordinate controller module","Confirm the selected installation"],"caption":"A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.","sources":[{"label":"AutomationDirect Productivity3000 PAC official CAD source","url":"https://support.automationdirect.com/docs/drawings.html"}],"profileId":"reviewed-electrical-equipment-20261029"},"url":"https://eloragrid.ai/objects/ga-p3-550-d362150a5551","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/equipment-preview/ga-p3-550-d362150a5551","scope":"Equipment preview: manufacturer drawing where available, otherwise a 3D thumbnail. Original object icon exports are removed."},"drawings":[],"sources":[{"id":"double-ga-ad-p3000pac","title":"AutomationDirect Productivity3000 PAC official CAD source","publisher":"AutomationDirect","url":"https://support.automationdirect.com/docs/drawings.html","type":"manufacturer","scope":"Published source collection, exact native identities and physical component roles. No source geometry is reproduced in the educational artwork.","checkedOn":"2026-10-29","reuse":"link-only","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}]}