{"schemaVersion":1,"slug":"ga-sd-hry-b4f6dded3873","name":"AutomationDirect SD-HRY switch operating accessory","kind":"object","abbreviation":"SD-HRY","aliases":["AutomationDirect SD-HRY switch operating accessory GA","SD-HRY general arrangement","SD-HRY equipment layout"],"category":"equipment-layouts","drawingTypes":["GA"],"referenceFamilies":["Manufacturer"],"summary":"SD-HRY switch operating accessory arrangement: mounting, interface and service-space coordination.","description":["SD-HRY is the drawing identifier for switch operating accessory in AutomationDirect's Non-Fused Disconnects collection. An operating accessory connects or supports part of a selected switch mechanism. It is not the switching device itself and cannot establish the complete assembly envelope by itself.","For example, in a control-panel door with a selected handle and operating linkage, use the SD-HRY reference to coordinate shaft or handle interface, fixing access and door motion. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","Use the reviewed native drawing identified as Power Products/Non-fused Disconnects/SD-HRY.DWG for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details."],"readingNotes":["Keep shaft or handle interface, fixing access and door motion visible in the layout.","This reference concerns the named SD-HRY drawing and its switch operating accessory role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance."],"drawingChecklist":["Match SD-HRY, the native drawing identity and the project equipment schedule.","Identify the exact switch and accessory combination.","Coordinate shaft or handle interface, fixing access and door motion with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"distinction":"This reference concerns the named SD-HRY drawing and its switch operating accessory role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.","facts":[{"label":"Manufacturer source","value":"AutomationDirect"},{"label":"Native drawing identity","value":"SD-HRY"},{"label":"Reviewed equipment role","value":"switch operating accessory"},{"label":"CAD scope","value":"Non-Fused Disconnects"},{"label":"Preview scope","value":"Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale"}],"references":[{"sourceId":"double-ga-ad-nonfused-disconnects","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}],"related":["ga-switch-disconnector","ga-equipment-maintenance-envelope"],"artwork":"concept-ga-sd-hry-b4f6dded3873","publishedOn":"2026-10-29","updatedOn":"2026-10-29","provenance":"independent-public-research","plainEnglish":{"title":"What it does","introduction":"SD-HRY is the drawing identifier for switch operating accessory in AutomationDirect's Non-Fused Disconnects collection. An operating accessory connects or supports part of a selected switch mechanism. It is not the switching device itself and cannot establish the complete assembly envelope by itself.","example":"For example, in a microgrid installation with a control-panel door with a selected handle and operating linkage, use the SD-HRY reference to coordinate shaft or handle interface, fixing access and door motion. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","drawings":"Use the reviewed native drawing identified as Power Products/Non-fused Disconnects/SD-HRY.DWG for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.","checklist":["Match SD-HRY, the native drawing identity and the project equipment schedule.","Identify the exact switch and accessory combination.","Coordinate shaft or handle interface, fixing access and door motion with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"terms":[{"name":"Drawing identity","meaning":"The named manufacturer drawing used to identify the intended physical configuration."},{"name":"Interface","meaning":"The place where this part mounts, connects or meets another selected part."},{"name":"Service space","meaning":"The area needed to reach, disconnect or remove the selected equipment as instructed."}],"diagram":"flow","steps":["Identify SD-HRY","Coordinate switch operating accessory","Confirm the selected installation"],"caption":"A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.","sources":[{"label":"AutomationDirect Non-Fused Disconnects official CAD source","url":"https://support.automationdirect.com/docs/drawings.html"}],"profileId":"reviewed-electrical-equipment-20261029"},"url":"https://eloragrid.ai/objects/ga-sd-hry-b4f6dded3873","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/equipment-preview/ga-sd-hry-b4f6dded3873","scope":"Equipment preview: manufacturer drawing where available, otherwise a 3D thumbnail. Original object icon exports are removed."},"drawings":[],"sources":[{"id":"double-ga-ad-nonfused-disconnects","title":"AutomationDirect Non-Fused Disconnects official CAD source","publisher":"AutomationDirect","url":"https://support.automationdirect.com/docs/drawings.html","type":"manufacturer","scope":"Published source collection, exact native identities and physical component roles. No source geometry is reproduced in the educational artwork.","checkedOn":"2026-10-29","reuse":"link-only","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}]}