# AutomationDirect SD-HRY switch operating accessory

Canonical URL: https://eloragrid.ai/objects/ga-sd-hry-b4f6dded3873
Publisher: Elora Grid
Updated: 2026-10-29
Lookup label: SD-HRY
Drawing use: GA
Reference families: Manufacturer

SD-HRY switch operating accessory arrangement: mounting, interface and service-space coordination.

## In plain English

### What it does

SD-HRY is the drawing identifier for switch operating accessory in AutomationDirect's Non-Fused Disconnects collection. An operating accessory connects or supports part of a selected switch mechanism. It is not the switching device itself and cannot establish the complete assembly envelope by itself.

### A simple example

For example, in a microgrid installation with a control-panel door with a selected handle and operating linkage, use the SD-HRY reference to coordinate shaft or handle interface, fixing access and door motion. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.

### What the drawings help you do

Use the reviewed native drawing identified as Power Products/Non-fused Disconnects/SD-HRY.DWG for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.

### Before using this reference

- Match SD-HRY, the native drawing identity and the project equipment schedule.
- Identify the exact switch and accessory combination.
- Coordinate shaft or handle interface, fixing access and door motion with neighbouring equipment.
- Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details.

### Terms

- Drawing identity: The named manufacturer drawing used to identify the intended physical configuration.
- Interface: The place where this part mounts, connects or meets another selected part.
- Service space: The area needed to reach, disconnect or remove the selected equipment as instructed.

Concept diagram: Identify SD-HRY → Coordinate switch operating accessory → Confirm the selected installation
A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.

- [AutomationDirect Non-Fused Disconnects official CAD source](https://support.automationdirect.com/docs/drawings.html)


## What it represents

SD-HRY is the drawing identifier for switch operating accessory in AutomationDirect's Non-Fused Disconnects collection. An operating accessory connects or supports part of a selected switch mechanism. It is not the switching device itself and cannot establish the complete assembly envelope by itself.
For example, in a control-panel door with a selected handle and operating linkage, use the SD-HRY reference to coordinate shaft or handle interface, fixing access and door motion. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.
Use the reviewed native drawing identified as Power Products/Non-fused Disconnects/SD-HRY.DWG for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.

## How to read it

- Keep shaft or handle interface, fixing access and door motion visible in the layout.
- This reference concerns the named SD-HRY drawing and its switch operating accessory role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.

## Information to show or reference

- Match SD-HRY, the native drawing identity and the project equipment schedule.
- Identify the exact switch and accessory combination.
- Coordinate shaft or handle interface, fixing access and door motion with neighbouring equipment.
- Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details.

## Important distinction

This reference concerns the named SD-HRY drawing and its switch operating accessory role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.

## Facts

- Manufacturer source: AutomationDirect
- Native drawing identity: SD-HRY
- Reviewed equipment role: switch operating accessory
- CAD scope: Non-Fused Disconnects
- Preview scope: Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale

## Public references

- [AutomationDirect Non-Fused Disconnects official CAD source](https://support.automationdirect.com/docs/drawings.html) — AutomationDirect. Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family.

## Graphic scope

No standalone 2D icon is supplied. Manufacturer drawings are shown only where an exact source match is available. Other equipment previews are 3D thumbnails, not dimensional drawings.