{"schemaVersion":1,"slug":"ga-sx3-300-4gp-9675a8b8a16e","name":"Abtech SX3_300_4GP electrical enclosure component","kind":"object","abbreviation":"SX3_300_4GP","aliases":["Abtech SX3_300_4GP electrical enclosure component GA","SX3_300_4GP general arrangement","SX3_300_4GP equipment layout"],"category":"equipment-layouts","drawingTypes":["GA"],"referenceFamilies":["Manufacturer"],"summary":"SX3_300_4GP electrical enclosure component arrangement: mounting, interface and service-space coordination.","description":["SX3_300_4GP is the drawing identifier for electrical enclosure component in Abtech's SX enclosure collection. An electrical enclosure component houses or supports part of an electrical assembly. A complete arrangement must also include the selected lid or door, internal mounting and cable-entry details.","For example, in an industrial junction enclosure beside a field cable route, use the SX3_300_4GP reference to coordinate lid or door access, mounting points and cable-entry faces. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","Use the reviewed native drawing identified as SX3_300_4GP.STEP for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details."],"readingNotes":["Keep lid or door access, mounting points and cable-entry faces visible in the layout.","This reference concerns the named SX3_300_4GP drawing and its electrical enclosure component role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance."],"drawingChecklist":["Match SX3_300_4GP, the native drawing identity and the project equipment schedule.","Identify the specific enclosure component and the separately selected accessories.","Coordinate lid or door access, mounting points and cable-entry faces with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"distinction":"This reference concerns the named SX3_300_4GP drawing and its electrical enclosure component role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.","facts":[{"label":"Manufacturer source","value":"Abtech"},{"label":"Native drawing identity","value":"SX3_300_4GP"},{"label":"Reviewed equipment role","value":"electrical enclosure component"},{"label":"CAD scope","value":"SX enclosure"},{"label":"Preview scope","value":"Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale"}],"references":[{"sourceId":"double-ga-uk-abtech-sx","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}],"related":["ga-wall-mounted-junction-enclosure","ga-equipment-maintenance-envelope"],"artwork":"concept-ga-sx3-300-4gp-9675a8b8a16e","publishedOn":"2026-10-29","updatedOn":"2026-10-29","provenance":"independent-public-research","plainEnglish":{"title":"What it does","introduction":"SX3_300_4GP is the drawing identifier for electrical enclosure component in Abtech's SX enclosure collection. An electrical enclosure component houses or supports part of an electrical assembly. A complete arrangement must also include the selected lid or door, internal mounting and cable-entry details.","example":"For example, in a microgrid installation with an industrial junction enclosure beside a field cable route, use the SX3_300_4GP reference to coordinate lid or door access, mounting points and cable-entry faces. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.","drawings":"Use the reviewed native drawing identified as SX3_300_4GP.STEP for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.","checklist":["Match SX3_300_4GP, the native drawing identity and the project equipment schedule.","Identify the specific enclosure component and the separately selected accessories.","Coordinate lid or door access, mounting points and cable-entry faces with neighbouring equipment.","Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details."],"terms":[{"name":"Drawing identity","meaning":"The named manufacturer drawing used to identify the intended physical configuration."},{"name":"Interface","meaning":"The place where this part mounts, connects or meets another selected part."},{"name":"Service space","meaning":"The area needed to reach, disconnect or remove the selected equipment as instructed."}],"diagram":"flow","steps":["Identify SX3_300_4GP","Coordinate electrical enclosure component","Confirm the selected installation"],"caption":"A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.","sources":[{"label":"Abtech SX enclosure official CAD source","url":"https://www.abtech-inc.com/resources/cad-2d-3d"}],"profileId":"reviewed-electrical-equipment-20261029"},"url":"https://eloragrid.ai/objects/ga-sx3-300-4gp-9675a8b8a16e","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/equipment-preview/ga-sx3-300-4gp-9675a8b8a16e","scope":"Equipment preview: manufacturer drawing where available, otherwise a 3D thumbnail. Original object icon exports are removed."},"drawings":[],"sources":[{"id":"double-ga-uk-abtech-sx","title":"Abtech SX enclosure official CAD source","publisher":"Abtech","url":"https://www.abtech-inc.com/resources/cad-2d-3d","type":"manufacturer","scope":"Published source collection, exact native identities and physical component roles. No source geometry is reproduced in the educational artwork.","checkedOn":"2026-10-29","reuse":"link-only","relevance":"Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family."}]}