# AutomationDirect T1F-08AD-2 analogue input module

Canonical URL: https://eloragrid.ai/objects/ga-t1f-08ad-2-50fdd225e665
Publisher: Elora Grid
Updated: 2026-10-29
Lookup label: T1F-08AD-2
Drawing use: GA
Reference families: Manufacturer

T1F-08AD-2 analogue input module arrangement: mounting, interface and service-space coordination.

## In plain English

### What it does

T1F-08AD-2 is the drawing identifier for analogue input module in AutomationDirect's Terminator Field I/O collection. An analogue input module brings continuously varying sensor information into a controller. Its physical connectors and mounting arrangement are different questions from the signal range configured in the control program.

### A simple example

For example, in a microgrid installation with a process-control panel receiving transmitter signals, use the T1F-08AD-2 reference to coordinate field-signal terminals, module removal and the controller connection. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.

### What the drawings help you do

Use the reviewed native drawing identified as Other PLC Products/Terminator Field IO/T1F-08AD-2.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.

### Before using this reference

- Match T1F-08AD-2, the native drawing identity and the project equipment schedule.
- Identify sensor cable groups and their marshalling terminals.
- Coordinate field-signal terminals, module removal and the controller connection with neighbouring equipment.
- Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details.

### Terms

- Drawing identity: The named manufacturer drawing used to identify the intended physical configuration.
- Interface: The place where this part mounts, connects or meets another selected part.
- Service space: The area needed to reach, disconnect or remove the selected equipment as instructed.

Concept diagram: Identify T1F-08AD-2 → Coordinate analogue input module → Confirm the selected installation
A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram.

- [AutomationDirect Terminator Field I/O official CAD source](https://support.automationdirect.com/docs/drawings.html)


## What it represents

T1F-08AD-2 is the drawing identifier for analogue input module in AutomationDirect's Terminator Field I/O collection. An analogue input module brings continuously varying sensor information into a controller. Its physical connectors and mounting arrangement are different questions from the signal range configured in the control program.
For example, in a process-control panel receiving transmitter signals, use the T1F-08AD-2 reference to coordinate field-signal terminals, module removal and the controller connection. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement.
Use the reviewed native drawing identified as Other PLC Products/Terminator Field IO/T1F-08AD-2.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details.

## How to read it

- Keep field-signal terminals, module removal and the controller connection visible in the layout.
- This reference concerns the named T1F-08AD-2 drawing and its analogue input module role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.

## Information to show or reference

- Match T1F-08AD-2, the native drawing identity and the project equipment schedule.
- Identify sensor cable groups and their marshalling terminals.
- Coordinate field-signal terminals, module removal and the controller connection with neighbouring equipment.
- Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details.

## Important distinction

This reference concerns the named T1F-08AD-2 drawing and its analogue input module role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance.

## Facts

- Manufacturer source: AutomationDirect
- Native drawing identity: T1F-08AD-2
- Reviewed equipment role: analogue input module
- CAD scope: Terminator Field I/O
- Preview scope: Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale

## Public references

- [AutomationDirect Terminator Field I/O official CAD source](https://support.automationdirect.com/docs/drawings.html) — AutomationDirect. Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family.

## Graphic scope

No standalone 2D icon is supplied. Manufacturer drawings are shown only where an exact source match is available. Other equipment previews are 3D thumbnails, not dimensional drawings.