# AutomationDirect ZP-MC06B-2-SSM16CA connector protective cover Canonical URL: https://eloragrid.ai/objects/ga-zp-mc06b-2-ssm16ca-0361b715694b Publisher: Elora Grid Updated: 2026-10-29 Lookup label: ZP-MC06B-2-SSM16CA Drawing use: GA Reference families: Manufacturer ZP-MC06B-2-SSM16CA connector protective cover arrangement: mounting, interface and service-space coordination. ## In plain English ### What it does ZP-MC06B-2-SSM16CA is the drawing identifier for connector protective cover in AutomationDirect's ZIPport Multi-Wire Connectors collection. A connector cover protects or closes the selected connector interface in its documented use. It is different from the connector insert and may need its own operating or removal space. ### A simple example For example, in a microgrid installation with a panel service connector that is covered when the mating plug is absent, use the ZP-MC06B-2-SSM16CA reference to coordinate cover motion, retention and access to the mating interface. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement. ### What the drawings help you do Use the reviewed native drawing identified as Enclosures and Wiring/ZIPport Multi-Wire Connectors/ZP-MC06B-2-SSM16CA.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details. ### Before using this reference - Match ZP-MC06B-2-SSM16CA, the native drawing identity and the project equipment schedule. - Identify the compatible connector and cover operating position. - Coordinate cover motion, retention and access to the mating interface with neighbouring equipment. - Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details. ### Terms - Drawing identity: The named manufacturer drawing used to identify the intended physical configuration. - Interface: The place where this part mounts, connects or meets another selected part. - Service space: The area needed to reach, disconnect or remove the selected equipment as instructed. Concept diagram: Identify ZP-MC06B-2-SSM16CA → Coordinate connector protective cover → Confirm the selected installation A practical coordination sequence for this named equipment reference. It is not an electrical connection diagram. - [AutomationDirect ZIPport Multi-Wire Connectors official CAD source](https://support.automationdirect.com/docs/drawings.html) ## What it represents ZP-MC06B-2-SSM16CA is the drawing identifier for connector protective cover in AutomationDirect's ZIPport Multi-Wire Connectors collection. A connector cover protects or closes the selected connector interface in its documented use. It is different from the connector insert and may need its own operating or removal space. For example, in a panel service connector that is covered when the mating plug is absent, use the ZP-MC06B-2-SSM16CA reference to coordinate cover motion, retention and access to the mating interface. Show the neighbouring equipment and the connection route so the installer can understand the intended arrangement. Use the reviewed native drawing identified as Enclosures and Wiring/ZIPport Multi-Wire Connectors/ZP-MC06B-2-SSM16CA.dwg for the exact physical details. Locate the named file in its original manufacturer archive. Manufacturer drawing previews are shown only when an exact approved source is available. Any illustrative 3D view is a separate concept and is not to scale; use the selected manufacturer documents for dimensions, ratings and installation details. ## How to read it - Keep cover motion, retention and access to the mating interface visible in the layout. - This reference concerns the named ZP-MC06B-2-SSM16CA drawing and its connector protective cover role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance. ## Information to show or reference - Match ZP-MC06B-2-SSM16CA, the native drawing identity and the project equipment schedule. - Identify the compatible connector and cover operating position. - Coordinate cover motion, retention and access to the mating interface with neighbouring equipment. - Confirm the current manufacturer installation instructions, selected revision and any required mounting or clearance details. ## Important distinction This reference concerns the named ZP-MC06B-2-SSM16CA drawing and its connector protective cover role. A drawing in the same collection is not automatic evidence of compatible terminals, mounts or electrical performance. ## Facts - Manufacturer source: AutomationDirect - Native drawing identity: ZP-MC06B-2-SSM16CA - Reviewed equipment role: connector protective cover - CAD scope: ZIPport Multi-Wire Connectors - Preview scope: Source-matched manufacturer drawings where available; illustrative 3D is separate and not to scale ## Public references - [AutomationDirect ZIPport Multi-Wire Connectors official CAD source](https://support.automationdirect.com/docs/drawings.html) — AutomationDirect. Official source collection and exact native drawing identity, with the equipment role checked against native content or the narrowly defined source family. ## Graphic scope No standalone 2D icon is supplied. Manufacturer drawings are shown only where an exact source match is available. Other equipment previews are 3D thumbnails, not dimensional drawings.