{"schemaVersion":1,"slug":"hydro-turbine-generator","name":"Hydro turbine generator","kind":"symbol","abbreviation":"HG","aliases":["hydro generator","micro-hydro generating unit","water turbine generator"],"category":"microgrid-systems","drawingTypes":["SLD"],"referenceFamilies":["IEC","IEEE / ANSI"],"summary":"A water turbine driving a generator, used for mini and micro hydro sources within microgrids and remote supplies.","description":["A hydro turbine generator converts water flow and head into electrical power through a Pelton, Francis, Kaplan or crossflow turbine driving a synchronous or induction generator. In microgrids, small hydro is valuable because it is dispatchable within the limits of the water available and supplies real rotating inertia.","Drawings show a turbine element on the shaft line to the generator circle, sometimes with a governor or a dump-load controller attached. Very small run-of-river units often regulate frequency by diverting surplus power to a ballast load rather than adjusting water flow, so the dump load may appear beside the generator.","The symbol does not state head, flow, runaway speed or whether the unit can operate isolated. Penstock and water-hammer constraints limit how quickly load can change, which is not visible on the electrical drawing."],"readingNotes":["A ballast or dump load beside a small hydro set indicates electronic load control instead of a mechanical governor.","Check whether the generator is synchronous or induction."],"drawingChecklist":["State turbine type, head and flow.","Show governor or load controller.","Reference generator type and protection."],"distinction":"A hydro unit is driven by water; its control differs from a thermal genset because load changes are limited by penstock dynamics.","facts":[{"label":"Prime mover","value":"Water turbine"},{"label":"Speed control","value":"Governor or electronic ballast load"},{"label":"Inertia","value":"Rotating machine inertia available"},{"label":"Preview","value":"Independent educational illustration; consult the applicable standard and project legend for the exact graphic"}],"references":[{"sourceId":"pub-symbol-station-types","relevance":"Public power station representation used as site-level context."},{"sourceId":"ieee-315","relevance":"Graphic-symbol standards context for rotating machines."}],"related":["three-phase-synchronous-generator","dump-load-controller","three-phase-induction-generator","generator"],"artwork":"s28-hydro-turbine-generator","publishedOn":"2026-10-28","updatedOn":"2026-10-28","provenance":"independent-public-research","plainEnglish":{"title":"What does Hydro turbine generator mean?","introduction":"A hydro turbine generator converts water flow and head into electrical power through a Pelton, Francis, Kaplan or crossflow turbine driving a synchronous or induction generator. In microgrids, small hydro is valuable because it is dispatchable within the limits of the water available and supplies real rotating inertia.","example":"Drawings show a turbine element on the shaft line to the generator circle, sometimes with a governor or a dump-load controller attached. Very small run-of-river units often regulate frequency by diverting surplus power to a ballast load rather than adjusting water flow, so the dump load may appear beside the generator.","drawings":"The symbol does not state head, flow, runaway speed or whether the unit can operate isolated. Penstock and water-hammer constraints limit how quickly load can change, which is not visible on the electrical drawing.","terms":[{"name":"Schematic","meaning":"A drawing showing function and connections rather than physical appearance."}],"diagram":"flow","steps":["Identify the device and form","Read the connections and state","Check the equipment reference"],"caption":"A guide to reading this reference. The original symbol illustration and its drawing notes appear below; these boxes are not a wiring diagram.","sources":[{"label":"AutoCAD Electrical: Power station and substation concepts","url":"https://help.autodesk.com/cloudhelp/2021/ENU/AutoCAD-Electrical/files/GUID-74EF80E8-018D-4A57-88BD-FF973F1B8185.htm"},{"label":"IEEE/ANSI 315-1975: graphic symbols for electrical and electronics diagrams","url":"https://standards.ieee.org/ieee/315/515/"}],"detail":"A water turbine driving a generator, used for mini and micro hydro sources within microgrids and remote supplies. A hydro unit is driven by water; its control differs from a thermal genset because load changes are limited by penstock dynamics.","profileId":"reviewed-symbol-20261028"},"url":"https://eloragrid.ai/symbols/hydro-turbine-generator","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/illustrations/hydro-turbine-generator.svg","scope":"Original educational concept; not an official standard graphic or product footprint","license":"https://creativecommons.org/licenses/by/4.0/"},"sources":[{"id":"pub-symbol-station-types","title":"AutoCAD Electrical: Power station and substation concepts","publisher":"Autodesk","url":"https://help.autodesk.com/cloudhelp/2021/ENU/AutoCAD-Electrical/files/GUID-74EF80E8-018D-4A57-88BD-FF973F1B8185.htm","type":"cad-reference","scope":"Public vendor catalogue naming and functional variants. Vendor block names are not IEC identifiers. Linked for reference; no graphics or CAD files are redistributed.","checkedOn":"2026-10-13","reuse":"link-only","relevance":"Public power station representation used as site-level context."},{"id":"ieee-315","title":"IEEE/ANSI 315-1975: graphic symbols for electrical and electronics diagrams","publisher":"IEEE Standards Association","url":"https://standards.ieee.org/ieee/315/515/","type":"standard","scope":"Graphic symbols and designation letters. IEEE lists this edition as Inactive-Reserved; it is a historical reference, not a claim of current compliance.","checkedOn":"2026-10-13","reuse":"link-only","relevance":"Graphic-symbol standards context for rotating machines."}]}