# Invalid-position fail-block gate Canonical URL: https://eloragrid.ai/symbols/invalid-position-fail-block-gate Publisher: Elora Grid Updated: 2026-11-03 Lookup label: IFG Drawing use: Schematic Reference families: Manufacturer Representation: Functional block Installation focus: switchgear Input: Invalid double-point status Output: Operation inhibit Blocks the assigned operation when its required position inputs form an invalid combination. ## In plain English ### What this block does Blocks the assigned operation when its required position inputs form an invalid combination. ### A simple example In a switchgear feeder panel, a control diagram can prevent an incompatible combination of breaker, disconnector and earthing-switch positions. The physical equipment documents determine which restrictions are mechanically enforced. For this reference, the drawing identifies “Invalid double-point status” at the input and “Operation inhibit” at the output. The fail response must be agreed for the application. ### What the drawings help you do Start at the named input: Invalid double-point status. Identify its source device or document and the state represented on the drawing. Follow the named output: Operation inhibit. Cross-reference its destination and separate the command from confirmation that the equipment responded. ### Terms - Input: Invalid double-point status - Output: Operation inhibit - Application reference: An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections. Concept diagram: Invalid double-point status → IFG → Operation inhibit A reading guide. The entry's original illustration and input/output facts describe this application. - [Masterclad medium-voltage switchgear: circuit-breaker section interlocks](https://productinfo.se.com/masterclad_mv_switchgear_ib/6055-30-masterclad-15kv-mv-switchgear-ib/English/6055-30%20Masterclad%20MV%20Switchgear%20Indoor%20%28bookmap%29_DD00646805.xml/%24/Section6-CircuitBreakerSectionInter-58DD6EC7) ## What it represents Blocks the assigned operation when its required position inputs form an invalid combination. An interlocking function permits or blocks an operation according to the positions and conditions of related equipment. Electrical, mechanical and trapped-key interlocks implement different parts of a coordinated operating philosophy. In a switchgear feeder panel, a control diagram can prevent an incompatible combination of breaker, disconnector and earthing-switch positions. The physical equipment documents determine which restrictions are mechanically enforced. For this reference, the drawing identifies “Invalid double-point status” at the input and “Operation inhibit” at the output. The fail response must be agreed for the application. Identify each initiating position, the action being blocked and the consequence of missing feedback. An illustrative logic diagram must not be treated as an operating procedure or proof of a complete safety system. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation. ## How to read it - Start at the named input: Invalid double-point status. Identify its source device or document and the state represented on the drawing. - Follow the named output: Operation inhibit. Cross-reference its destination and separate the command from confirmation that the equipment responded. - The fail response must be agreed for the application. - Identify each initiating position, the action being blocked and the consequence of missing feedback. An illustrative logic diagram must not be treated as an operating procedure or proof of a complete safety system. ## Information to show or reference - Label the source and connection reference for invalid double-point status. - Identify the destination and defined state of operation inhibit. - Record the equipment or control-document revision supporting this functional block. - Check this application limit in the project design: The fail response must be agreed for the application. ## Important distinction The fail response must be agreed for the application. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram. ## Facts - Representation: Functional block - Installation focus: Switchgear - Input / boundary: Invalid double-point status - Output / connection: Operation inhibit - Lookup label: IFG is a library lookup label, not a standard device designation. ## Public references - [Masterclad medium-voltage switchgear: circuit-breaker section interlocks](https://productinfo.se.com/masterclad_mv_switchgear_ib/6055-30-masterclad-15kv-mv-switchgear-ib/English/6055-30%20Masterclad%20MV%20Switchgear%20Indoor%20%28bookmap%29_DD00646805.xml/%24/Section6-CircuitBreakerSectionInter-58DD6EC7) — Schneider Electric. Public technical context for switchgear interlocking functions. Breaker control, mechanism, position contacts, racking interlocks and test interfaces. The application text and educational graphic are independently authored; the publisher does not certify this representation. ## Graphic scope Independent original educational concept illustration by Elora Grid. Not a certified standards graphic or manufacturer footprint. Unitless; not to scale. Original artwork licence: https://creativecommons.org/licenses/by/4.0/. Publisher material is linked only.