{"schemaVersion":1,"slug":"microgrid-reactive-setpoint-ramp-limiter","name":"Microgrid reactive-setpoint ramp limiter","kind":"symbol","abbreviation":"MRRL","aliases":["Microgrid voltage and reactive-power controls","microgrids Microgrid voltage and reactive-power controls","microgrids","Microgrids","Reactive-power target","Rate-limited reactive request"],"category":"microgrid-systems","drawingTypes":["Schematic"],"referenceFamilies":["Manufacturer"],"summary":"Constrains the change rate of the assigned reactive-power request.","description":["Constrains the change rate of the assigned reactive-power request. Voltage and reactive-power control coordinate the AC operating condition of the microgrid resources. A voltage target, reactive-power target and power-factor target represent different control objectives and should have explicit ownership.","In an islanded microgrid, the assigned reference source supports bus voltage while other compatible resources share reactive demand according to the selected control method. Grid-connected operation can use a different objective at the PCC. For this reference, the drawing identifies “Reactive-power target” at the input and “Rate-limited reactive request” at the output. The resource response remains equipment-dependent.","Show each measured quantity, target and resource capability limit. Control-loop tuning, equipment capability and parallel operation require a validated design rather than an assumed property of the symbol. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation."],"readingNotes":["Start at the named input: Reactive-power target. Identify its source device or document and the state represented on the drawing.","Follow the named output: Rate-limited reactive request. Cross-reference its destination and separate the command from confirmation that the equipment responded.","The resource response remains equipment-dependent.","Show each measured quantity, target and resource capability limit. Control-loop tuning, equipment capability and parallel operation require a validated design rather than an assumed property of the symbol."],"drawingChecklist":["Label the source and connection reference for reactive-power target.","Identify the destination and defined state of rate-limited reactive request.","Record the equipment or control-document revision supporting this functional block.","Check this application limit in the project design: The resource response remains equipment-dependent."],"distinction":"The resource response remains equipment-dependent. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.","facts":[{"label":"Representation","value":"Functional block"},{"label":"Installation focus","value":"Microgrids"},{"label":"Input / boundary","value":"Reactive-power target"},{"label":"Output / connection","value":"Rate-limited reactive request"},{"label":"Lookup label","value":"MRRL is a library lookup label, not a standard device designation."}],"references":[{"sourceId":"pi26-mg-power","relevance":"Public technical context for microgrid voltage and reactive-power controls. Active and reactive power, generation, load control, operating reserves and system supervision. The application text and educational graphic are independently authored; the publisher does not certify this representation."}],"related":["grid-forming-inverter","statcom","microgrid-reactive-dispatch-tracking-monitor"],"artwork":"pi26-microgrid-reactive-setpoint-ramp-limiter","publishedOn":"2026-11-03","updatedOn":"2026-11-03","provenance":"independent-public-research","representation":{"type":"functional-block","focus":"microgrids","family":"microgrid-reactive","input":"Reactive-power target","output":"Rate-limited reactive request"},"plainEnglish":{"title":"What this block does","introduction":"Constrains the change rate of the assigned reactive-power request.","example":"In an islanded microgrid, the assigned reference source supports bus voltage while other compatible resources share reactive demand according to the selected control method. Grid-connected operation can use a different objective at the PCC. For this reference, the drawing identifies “Reactive-power target” at the input and “Rate-limited reactive request” at the output. The resource response remains equipment-dependent.","drawings":"Start at the named input: Reactive-power target. Identify its source device or document and the state represented on the drawing. Follow the named output: Rate-limited reactive request. Cross-reference its destination and separate the command from confirmation that the equipment responded.","terms":[{"name":"Input","meaning":"Reactive-power target"},{"name":"Output","meaning":"Rate-limited reactive request"},{"name":"Application reference","meaning":"An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections."}],"diagram":"flow","steps":["Reactive-power target","MRRL","Rate-limited reactive request"],"caption":"A reading guide. The entry's original illustration and input/output facts describe this application.","sources":[{"label":"Microgrid control systems","url":"https://selinc.com/services/microgrids-power-management/microgrid-control-systems/"}],"profileId":"power-installation-microgrid-reactive"},"url":"https://eloragrid.ai/symbols/microgrid-reactive-setpoint-ramp-limiter","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/illustrations/microgrid-reactive-setpoint-ramp-limiter.svg","scope":"Original educational concept; not an official standard graphic or product footprint","license":"https://creativecommons.org/licenses/by/4.0/"},"sources":[{"id":"pi26-mg-power","publisher":"SEL","title":"Microgrid control systems","url":"https://selinc.com/services/microgrids-power-management/microgrid-control-systems/","scope":"Active and reactive power, generation, load control, operating reserves and system supervision.","type":"manufacturer","checkedOn":"2026-11-03","reuse":"link-only","relevance":"Public technical context for microgrid voltage and reactive-power controls. Active and reactive power, generation, load control, operating reserves and system supervision. The application text and educational graphic are independently authored; the publisher does not certify this representation."}]}