# Microgrid renewable-loss reserve request Canonical URL: https://eloragrid.ai/symbols/microgrid-renewable-loss-reserve-request Publisher: Elora Grid Updated: 2026-11-03 Lookup label: MRRR Drawing use: Schematic Reference families: Manufacturer Representation: Functional block Installation focus: microgrids Input: Renewable contingency and reserve Output: Reserve-support request Associates the selected renewable-loss contingency with its required reserve or load response. ## In plain English ### What this block does Associates the selected renewable-loss contingency with its required reserve or load response. ### A simple example In a microgrid with solar generation, the controller can restrain inverter output when local load and storage cannot absorb the available power. The resource controller reports its own availability and accepted operating limits. For this reference, the drawing identifies “Renewable contingency and reserve” at the input and “Reserve-support request” at the output. The contingency needs a system-specific assessment. ### What the drawings help you do Start at the named input: Renewable contingency and reserve. Identify its source device or document and the state represented on the drawing. Follow the named output: Reserve-support request. Cross-reference its destination and separate the command from confirmation that the equipment responded. ### Terms - Input: Renewable contingency and reserve - Output: Reserve-support request - Application reference: An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections. Concept diagram: Renewable contingency and reserve → MRRR → Reserve-support request A reading guide. The entry's original illustration and input/output facts describe this application. - [Microgrid processing and control functions](https://productinfo.se.com/esxp_digital_apps_iec/mg/English/BM_ESXP_DG_Microgrid_IEC_0001122076.xml/%24/ESXP_DG_MG_SD_Processing_0001125595) ## What it represents Associates the selected renewable-loss contingency with its required reserve or load response. Renewable-generation coordination connects variable resource availability, inverter operating limits and the microgrid power target. Available solar or wind power, an issued curtailment request and actual delivered power are different signals. In a microgrid with solar generation, the controller can restrain inverter output when local load and storage cannot absorb the available power. The resource controller reports its own availability and accepted operating limits. For this reference, the drawing identifies “Renewable contingency and reserve” at the input and “Reserve-support request” at the output. The contingency needs a system-specific assessment. Identify the point where power is measured and the system declaring each availability or limit signal. Resource forecasts and controller requests do not guarantee the delivered generation at every instant. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation. ## How to read it - Start at the named input: Renewable contingency and reserve. Identify its source device or document and the state represented on the drawing. - Follow the named output: Reserve-support request. Cross-reference its destination and separate the command from confirmation that the equipment responded. - The contingency needs a system-specific assessment. - Identify the point where power is measured and the system declaring each availability or limit signal. Resource forecasts and controller requests do not guarantee the delivered generation at every instant. ## Information to show or reference - Label the source and connection reference for renewable contingency and reserve. - Identify the destination and defined state of reserve-support request. - Record the equipment or control-document revision supporting this functional block. - Check this application limit in the project design: The contingency needs a system-specific assessment. ## Important distinction The contingency needs a system-specific assessment. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram. ## Facts - Representation: Functional block - Installation focus: Microgrids - Input / boundary: Renewable contingency and reserve - Output / connection: Reserve-support request - Lookup label: MRRR is a library lookup label, not a standard device designation. ## Public references - [Microgrid processing and control functions](https://productinfo.se.com/esxp_digital_apps_iec/mg/English/BM_ESXP_DG_Microgrid_IEC_0001122076.xml/%24/ESXP_DG_MG_SD_Processing_0001125595) — Schneider Electric. Public technical context for microgrid renewable-generation interfaces. Renewable generation dispatch and microgrid source coordination. The application text and educational graphic are independently authored; the publisher does not certify this representation. ## Graphic scope Independent original educational concept illustration by Elora Grid. Not a certified standards graphic or manufacturer footprint. Unitless; not to scale. Original artwork licence: https://creativecommons.org/licenses/by/4.0/. Publisher material is linked only.