# Protection channel latency-monitor interface

Canonical URL: https://eloragrid.ai/symbols/protection-channel-latency-monitor-interface
Publisher: Elora Grid
Updated: 2026-11-03
Lookup label: PCLI
Drawing use: Schematic
Reference families: Manufacturer

Representation: Functional block
Installation focus: switchyards
Input: Channel delay measurements
Output: Latency supervision information

Reports the selected communication-delay information relevant to a protection application.

## In plain English

### What this block does

Reports the selected communication-delay information relevant to a protection application.

### A simple example

In a switchyard line bay, carrier-coupling equipment can connect a protection communication terminal to the transmission conductor. Fiber-based protection uses another physical path but still needs named endpoints and channel supervision. For this reference, the drawing identifies “Channel delay measurements” at the input and “Latency supervision information” at the output. Permitted delay depends on the protection scheme.

### What the drawings help you do

Start at the named input: Channel delay measurements. Identify its source device or document and the state represented on the drawing. Follow the named output: Latency supervision information. Cross-reference its destination and separate the command from confirmation that the equipment responded.

### Terms

- Input: Channel delay measurements
- Output: Latency supervision information
- Application reference: An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.

Concept diagram: Channel delay measurements → PCLI → Latency supervision information
A reading guide. The entry's original illustration and input/output facts describe this application.

- [Line traps: power-line carrier communication](https://www.gevernova.com/grid-solutions/sites/default/files/2025-09/Line-Traps-Brochure-EN-N50059-Hybrid-202504-R002.pdf)


## What it represents

Reports the selected communication-delay information relevant to a protection application. A protection communication interface carries information between circuit ends or couples a communication signal to a primary line. Its signal path is different from the power-current path even when both use part of the same installation.
In a switchyard line bay, carrier-coupling equipment can connect a protection communication terminal to the transmission conductor. Fiber-based protection uses another physical path but still needs named endpoints and channel supervision. For this reference, the drawing identifies “Channel delay measurements” at the input and “Latency supervision information” at the output. Permitted delay depends on the protection scheme.
Show each coupling boundary and the intended information direction. Frequency selection, channel performance, insulation duty and protective coordination require the selected communication and primary equipment design. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.

## How to read it

- Start at the named input: Channel delay measurements. Identify its source device or document and the state represented on the drawing.
- Follow the named output: Latency supervision information. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Permitted delay depends on the protection scheme.
- Show each coupling boundary and the intended information direction. Frequency selection, channel performance, insulation duty and protective coordination require the selected communication and primary equipment design.

## Information to show or reference

- Label the source and connection reference for channel delay measurements.
- Identify the destination and defined state of latency supervision information.
- Record the equipment or control-document revision supporting this functional block.
- Check this application limit in the project design: Permitted delay depends on the protection scheme.

## Important distinction

Permitted delay depends on the protection scheme. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.

## Facts

- Representation: Functional block
- Installation focus: Switchyards
- Input / boundary: Channel delay measurements
- Output / connection: Latency supervision information
- Lookup label: PCLI is a library lookup label, not a standard device designation.

## Public references

- [Line traps: power-line carrier communication](https://www.gevernova.com/grid-solutions/sites/default/files/2025-09/Line-Traps-Brochure-EN-N50059-Hybrid-202504-R002.pdf) — GE Vernova. Public technical context for line carrier and protection communication interfaces. Line traps, coupling and power-line carrier communications. The application text and educational graphic are independently authored; the publisher does not certify this representation.

## Graphic scope

Independent original educational concept illustration by Elora Grid. Not a certified standards graphic or manufacturer footprint. Unitless; not to scale. Original artwork licence: https://creativecommons.org/licenses/by/4.0/. Publisher material is linked only.