# Switchroom cooling-failure escalation interface

Canonical URL: https://eloragrid.ai/symbols/switchroom-cooling-failure-escalation-interface
Publisher: Elora Grid
Updated: 2026-11-03
Lookup label: SCEI
Drawing use: Schematic
Reference families: Manufacturer

Representation: Functional block
Installation focus: switchrooms
Input: Cooling fault and room condition
Output: Escalated room alarm

Relates a cooling equipment fault to the assigned room-level supervisory escalation.

## In plain English

### What this block does

Relates a cooling equipment fault to the assigned room-level supervisory escalation.

### A simple example

In a switchroom, water ingress, temperature, humidity and equipment-service alarms can be sent to the station controller with separate point names so an operator can identify the affected area. For this reference, the drawing identifies “Cooling fault and room condition” at the input and “Escalated room alarm” at the output. Escalation is defined by the room-services philosophy.

### What the drawings help you do

Start at the named input: Cooling fault and room condition. Identify its source device or document and the state represented on the drawing. Follow the named output: Escalated room alarm. Cross-reference its destination and separate the command from confirmation that the equipment responded.

### Terms

- Input: Cooling fault and room condition
- Output: Escalated room alarm
- Application reference: An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.

Concept diagram: Cooling fault and room condition → SCEI → Escalated room alarm
A reading guide. The entry's original illustration and input/output facts describe this application.

- [Ventilation in MV substations](https://www.electrical-installation.org/enwiki/Ventilation_in_MV_Substations)


## What it represents

Relates a cooling equipment fault to the assigned room-level supervisory escalation. Environmental supervision turns measurements or contact states into clearly named room-service indications. A sensor measures a condition; the supervisory function decides whether the assigned alarm or control response is needed.
In a switchroom, water ingress, temperature, humidity and equipment-service alarms can be sent to the station controller with separate point names so an operator can identify the affected area. For this reference, the drawing identifies “Cooling fault and room condition” at the input and “Escalated room alarm” at the output. Escalation is defined by the room-services philosophy.
Keep sensor location, alarm thresholds, delay and monitoring coverage in the room-services schedule. An environmental alarm is a diagnostic input, not a complete assessment of electrical equipment condition. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.

## How to read it

- Start at the named input: Cooling fault and room condition. Identify its source device or document and the state represented on the drawing.
- Follow the named output: Escalated room alarm. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Escalation is defined by the room-services philosophy.
- Keep sensor location, alarm thresholds, delay and monitoring coverage in the room-services schedule. An environmental alarm is a diagnostic input, not a complete assessment of electrical equipment condition.

## Information to show or reference

- Label the source and connection reference for cooling fault and room condition.
- Identify the destination and defined state of escalated room alarm.
- Record the equipment or control-document revision supporting this functional block.
- Check this application limit in the project design: Escalation is defined by the room-services philosophy.

## Important distinction

Escalation is defined by the room-services philosophy. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.

## Facts

- Representation: Functional block
- Installation focus: Switchrooms
- Input / boundary: Cooling fault and room condition
- Output / connection: Escalated room alarm
- Lookup label: SCEI is a library lookup label, not a standard device designation.

## Public references

- [Ventilation in MV substations](https://www.electrical-installation.org/enwiki/Ventilation_in_MV_Substations) — Schneider Electric. Public technical context for switchroom environmental supervision. Heat removal, condensation and environmental design context. The application text and educational graphic are independently authored; the publisher does not certify this representation.

## Graphic scope

Independent original educational concept illustration by Elora Grid. Not a certified standards graphic or manufacturer footprint. Unitless; not to scale. Original artwork licence: https://creativecommons.org/licenses/by/4.0/. Publisher material is linked only.