# Transformer cooler supply-loss input

Canonical URL: https://eloragrid.ai/symbols/transformer-cooler-supply-loss-input
Publisher: Elora Grid
Updated: 2026-11-03
Lookup label: TCSI
Drawing use: Schematic
Reference families: Manufacturer

Representation: Functional block
Installation focus: substations
Input: Cooling supply supervision
Output: Cooling supply-loss alarm

Reports loss of the monitored electrical supply to the transformer cooling system.

## In plain English

### What this block does

Reports loss of the monitored electrical supply to the transformer cooling system.

### A simple example

In a substation transformer bay, a protection panel receives winding-current measurements and equipment alarm contacts. An operator can then distinguish an electrical protection operation from a cooling-system or physical-condition alarm. For this reference, the drawing identifies “Cooling supply supervision” at the input and “Cooling supply-loss alarm” at the output. A supply alarm differs from a temperature alarm.

### What the drawings help you do

Start at the named input: Cooling supply supervision. Identify its source device or document and the state represented on the drawing. Follow the named output: Cooling supply-loss alarm. Cross-reference its destination and separate the command from confirmation that the equipment responded.

### Terms

- Input: Cooling supply supervision
- Output: Cooling supply-loss alarm
- Application reference: An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.

Concept diagram: Cooling supply supervision → TCSI → Cooling supply-loss alarm
A reading guide. The entry's original illustration and input/output facts describe this application.

- [SEL-487E transformer protection relay](https://selinc.com/products/487E/)


## What it represents

Reports loss of the monitored electrical supply to the transformer cooling system. Transformer monitoring interfaces connect physical sensors and protection calculations to the station's alarms and trip logic. Temperature, oil, gas, pressure and electrical measurements indicate different conditions and require separate interpretation.
In a substation transformer bay, a protection panel receives winding-current measurements and equipment alarm contacts. An operator can then distinguish an electrical protection operation from a cooling-system or physical-condition alarm. For this reference, the drawing identifies “Cooling supply supervision” at the input and “Cooling supply-loss alarm” at the output. A supply alarm differs from a temperature alarm.
Identify the sensor or calculation, its monitored zone and its assigned response. Alarm and trip thresholds, sensor fitting and protection settings belong to the selected transformer documentation and the approved protection design. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.

## How to read it

- Start at the named input: Cooling supply supervision. Identify its source device or document and the state represented on the drawing.
- Follow the named output: Cooling supply-loss alarm. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- A supply alarm differs from a temperature alarm.
- Identify the sensor or calculation, its monitored zone and its assigned response. Alarm and trip thresholds, sensor fitting and protection settings belong to the selected transformer documentation and the approved protection design.

## Information to show or reference

- Label the source and connection reference for cooling supply supervision.
- Identify the destination and defined state of cooling supply-loss alarm.
- Record the equipment or control-document revision supporting this functional block.
- Check this application limit in the project design: A supply alarm differs from a temperature alarm.

## Important distinction

A supply alarm differs from a temperature alarm. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.

## Facts

- Representation: Functional block
- Installation focus: Substations
- Input / boundary: Cooling supply supervision
- Output / connection: Cooling supply-loss alarm
- Lookup label: TCSI is a library lookup label, not a standard device designation.

## Public references

- [SEL-487E transformer protection relay](https://selinc.com/products/487E/) — SEL. Public technical context for transformer protection and monitoring interfaces. Transformer protection, monitoring and measurement interfaces. The application text and educational graphic are independently authored; the publisher does not certify this representation.

## Graphic scope

Independent original educational concept illustration by Elora Grid. Not a certified standards graphic or manufacturer footprint. Unitless; not to scale. Original artwork licence: https://creativecommons.org/licenses/by/4.0/. Publisher material is linked only.