# Transformer top-oil temperature alarm interface

Canonical URL: https://eloragrid.ai/symbols/transformer-top-oil-temperature-alarm-interface
Publisher: Elora Grid
Updated: 2026-11-03
Lookup label: TTTAI
Drawing use: Schematic
Reference families: Manufacturer

Representation: Functional block
Installation focus: substations
Input: Top-oil temperature measurement
Output: Top-oil temperature alarm

Receives the measured top-oil temperature condition used for the defined alarm action.

## In plain English

### What this block does

Receives the measured top-oil temperature condition used for the defined alarm action.

### A simple example

In a substation transformer bay, a protection panel receives winding-current measurements and equipment alarm contacts. An operator can then distinguish an electrical protection operation from a cooling-system or physical-condition alarm. For this reference, the drawing identifies “Top-oil temperature measurement” at the input and “Top-oil temperature alarm” at the output. Top-oil and winding temperatures differ.

### What the drawings help you do

Start at the named input: Top-oil temperature measurement. Identify its source device or document and the state represented on the drawing. Follow the named output: Top-oil temperature alarm. Cross-reference its destination and separate the command from confirmation that the equipment responded.

### Terms

- Input: Top-oil temperature measurement
- Output: Top-oil temperature alarm
- Application reference: An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.

Concept diagram: Top-oil temperature measurement → TTTAI → Top-oil temperature alarm
A reading guide. The entry's original illustration and input/output facts describe this application.

- [SEL-487E transformer protection relay](https://selinc.com/products/487E/)


## What it represents

Receives the measured top-oil temperature condition used for the defined alarm action. Transformer monitoring interfaces connect physical sensors and protection calculations to the station's alarms and trip logic. Temperature, oil, gas, pressure and electrical measurements indicate different conditions and require separate interpretation.
In a substation transformer bay, a protection panel receives winding-current measurements and equipment alarm contacts. An operator can then distinguish an electrical protection operation from a cooling-system or physical-condition alarm. For this reference, the drawing identifies “Top-oil temperature measurement” at the input and “Top-oil temperature alarm” at the output. Top-oil and winding temperatures differ.
Identify the sensor or calculation, its monitored zone and its assigned response. Alarm and trip thresholds, sensor fitting and protection settings belong to the selected transformer documentation and the approved protection design. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.

## How to read it

- Start at the named input: Top-oil temperature measurement. Identify its source device or document and the state represented on the drawing.
- Follow the named output: Top-oil temperature alarm. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Top-oil and winding temperatures differ.
- Identify the sensor or calculation, its monitored zone and its assigned response. Alarm and trip thresholds, sensor fitting and protection settings belong to the selected transformer documentation and the approved protection design.

## Information to show or reference

- Label the source and connection reference for top-oil temperature measurement.
- Identify the destination and defined state of top-oil temperature alarm.
- Record the equipment or control-document revision supporting this functional block.
- Check this application limit in the project design: Top-oil and winding temperatures differ.

## Important distinction

Top-oil and winding temperatures differ. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.

## Facts

- Representation: Functional block
- Installation focus: Substations
- Input / boundary: Top-oil temperature measurement
- Output / connection: Top-oil temperature alarm
- Lookup label: TTTAI is a library lookup label, not a standard device designation.

## Public references

- [SEL-487E transformer protection relay](https://selinc.com/products/487E/) — SEL. Public technical context for transformer protection and monitoring interfaces. Transformer protection, monitoring and measurement interfaces. The application text and educational graphic are independently authored; the publisher does not certify this representation.

## Graphic scope

Independent original educational concept illustration by Elora Grid. Not a certified standards graphic or manufacturer footprint. Unitless; not to scale. Original artwork licence: https://creativecommons.org/licenses/by/4.0/. Publisher material is linked only.