{"schemaVersion":1,"slug":"ups-backed-control-ac-bus","name":"UPS-backed control AC bus","kind":"symbol","abbreviation":"UCAB","aliases":["Switchroom auxiliary AC distribution","switchrooms Switchroom auxiliary AC distribution","switchrooms","Switchrooms","UPS AC output","Backed-up control loads"],"category":"installation-communications","drawingTypes":["Schematic"],"referenceFamilies":["Manufacturer"],"summary":"Separates the AC loads supplied through the station's documented UPS path.","description":["Separates the AC loads supplied through the station's documented UPS path. An auxiliary AC distribution diagram identifies the supplies serving room services and control-support equipment. Essential, backed-up and ordinary circuits can have different source paths and operating priorities.","In a switchroom, the lighting, service sockets, charger input and room cooling may be fed from different auxiliary branches. A source change must preserve the identities of loads that require continuity. For this reference, the drawing identifies “UPS AC output” at the input and “Backed-up control loads” at the output. Runtime depends on the selected UPS and load.","Label source, branch protection and load purpose. The arrangement does not establish conductor sizes, protection settings or installation compliance; it links the operating role to the selected equipment schedule. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation."],"readingNotes":["Start at the named input: UPS AC output. Identify its source device or document and the state represented on the drawing.","Follow the named output: Backed-up control loads. Cross-reference its destination and separate the command from confirmation that the equipment responded.","Runtime depends on the selected UPS and load.","Label source, branch protection and load purpose. The arrangement does not establish conductor sizes, protection settings or installation compliance; it links the operating role to the selected equipment schedule."],"drawingChecklist":["Label the source and connection reference for ups ac output.","Identify the destination and defined state of backed-up control loads.","Record the equipment or control-document revision supporting this functional block.","Check this application limit in the project design: Runtime depends on the selected UPS and load."],"distinction":"Runtime depends on the selected UPS and load. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.","facts":[{"label":"Representation","value":"Functional block"},{"label":"Installation focus","value":"Switchrooms"},{"label":"Input / boundary","value":"UPS AC output"},{"label":"Output / connection","value":"Backed-up control loads"},{"label":"Lookup label","value":"UCAB is a library lookup label, not a standard device designation."}],"references":[{"sourceId":"pi26-station-power","relevance":"Public technical context for switchroom auxiliary ac distribution. Independent AC and DC sources for station auxiliary power. The application text and educational graphic are independently authored; the publisher does not certify this representation."}],"related":["ga-panel-service-outlet","ac-uninterruptible-power-supply","auxiliary-ac-source-transfer-interface"],"artwork":"pi26-ups-backed-control-ac-bus","publishedOn":"2026-11-03","updatedOn":"2026-11-03","provenance":"independent-public-research","representation":{"type":"functional-block","focus":"switchrooms","family":"room-ac","input":"UPS AC output","output":"Backed-up control loads"},"plainEnglish":{"title":"What this block does","introduction":"Separates the AC loads supplied through the station's documented UPS path.","example":"In a switchroom, the lighting, service sockets, charger input and room cooling may be fed from different auxiliary branches. A source change must preserve the identities of loads that require continuity. For this reference, the drawing identifies “UPS AC output” at the input and “Backed-up control loads” at the output. Runtime depends on the selected UPS and load.","drawings":"Start at the named input: UPS AC output. Identify its source device or document and the state represented on the drawing. Follow the named output: Backed-up control loads. Cross-reference its destination and separate the command from confirmation that the equipment responded.","terms":[{"name":"Input","meaning":"UPS AC output"},{"name":"Output","meaning":"Backed-up control loads"},{"name":"Application reference","meaning":"An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections."}],"diagram":"flow","steps":["UPS AC output","UCAB","Backed-up control loads"],"caption":"A reading guide. The entry's original illustration and input/output facts describe this application.","sources":[{"label":"SEL-RPM redundant power module","url":"https://selinc.com/products/RPM/"}],"profileId":"power-installation-room-ac"},"url":"https://eloragrid.ai/symbols/ups-backed-control-ac-bus","illustration":{"url":"https://eloragrid.ai/tools/electrical-library/illustrations/ups-backed-control-ac-bus.svg","scope":"Original educational concept; not an official standard graphic or product footprint","license":"https://creativecommons.org/licenses/by/4.0/"},"sources":[{"id":"pi26-station-power","publisher":"SEL","title":"SEL-RPM redundant power module","url":"https://selinc.com/products/RPM/","scope":"Independent AC and DC sources for station auxiliary power.","type":"manufacturer","checkedOn":"2026-11-03","reuse":"link-only","relevance":"Public technical context for switchroom auxiliary ac distribution. Independent AC and DC sources for station auxiliary power. The application text and educational graphic are independently authored; the publisher does not certify this representation."}]}