Side-by-side reference

Understand the difference.

Compare the meaning, drawing context and source references of two entries. A similar graphic or shared abbreviation does not establish equivalence.

First referenceCompare with

IEEE / ANSI

ANSI/IEEE coaxial connector symbol

IEEE-style schematics show a coaxial connector as a centre contact within an outer shell outline, often with the shell tied to ground. US-practice drawings label coaxial jacks with J reference designators and plugs with P, following IEEE reference designation practice.

Drawing use: Schematic
Application: Connections & wiring
Reference family: IEEE / ANSI
Form evidence: Coaxial connector form. Independent illustration in IEEE drafting context; no equivalence of every detailed standard graphic is asserted.

A distinction that matters

An ANSI coaxial connector mates concentric contacts; the ANSI plug and socket pair mates single conductors.

Full reference

IEC

Coaxial plug and socket

The coaxial plug and socket shows a connector that mates both the centre conductor and the outer conductor of a coaxial cable. In power and control systems it appears on GPS antenna inputs for time synchronisation, partial-discharge and RF sensors, and video or radio links.

Drawing use: Schematic
Application: Connections & wiring
Reference family: IEC
Form evidence: Coaxial plug and socket. Independent IEC-context illustration; not certified IEC geometry.

A distinction that matters

A coaxial plug and socket mates concentric contacts; an ordinary plug and socket pair mates single pins.

Full reference

Original educational previews. Follow the source references on each full entry for the appropriate standard or selected product.