GA
Fire alarm control panel location
A fire-alarm panel location coordinates the specified control equipment within the room or building layout.
GA objects
IEC · FACP
Fire alarm control panel plan symbol
Plan symbol for fire detection control and indicating equipment, the panel that monitors detectors and drives alarms.
In plain English
What does Fire alarm control panel plan mean?
The fire alarm control panel is drawn as a rectangle with a fire tag, such as FACP, FIP or CIE, at its location, normally near the main entrance or fire brigade access point. Loops and circuits on the plan are labelled back to this panel.
A simple example
The plan symbol is a reference for the designer, the fire brigade and the installer. A separate general arrangement object can record the physical panel location and clearances; this symbol identifies the system head end on schematic and layout drawings.
What the drawings help you do
The symbol does not tell you the number of loops, battery size or interfaces to other systems. Those are in the panel specification.
This particular reference
Plan symbol for fire detection control and indicating equipment, the panel that monitors detectors and drives alarms. A repeater panel shows status only; the main control panel monitors and controls the system.
- Schematic
- A drawing showing function and connections rather than physical appearance.
Read the source: IEC graphical symbols for diagrams · Electrical installation design methodology and references
IEC · Fire alarm control and indicating equipment
IEC 60617 installation-plan style (architectural and topographical installation symbols); independently drawn, not certified IEC geometry or a database identifier.
Shown as an independently authored educational illustration. Use the cited publication and drawing legend to verify the required drafting form.
GA · FACP
What it represents
The fire alarm control panel is drawn as a rectangle with a fire tag, such as FACP, FIP or CIE, at its location, normally near the main entrance or fire brigade access point. Loops and circuits on the plan are labelled back to this panel.
The plan symbol is a reference for the designer, the fire brigade and the installer. A separate GA object can record the physical panel location and clearances; this symbol identifies the system head end on schematic and layout drawings.
The symbol does not tell you the number of loops, battery size or interfaces to other systems. Those are in the panel specification.
How to read it
- Check location against brigade access requirements.
- Match loop labels to the panel.
Information to show or reference
- State loops and interfaces.
- Show mains supply and battery.
- Show brigade access.
A distinction that matters
A repeater panel shows status only; the main control panel monitors and controls the system.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
IEC graphical symbols for diagrams
IEC graphical symbol context for installation plans; independently drawn here.
Electrical installation design methodology and references
Installation design context: life-safety systems are coordinated with the building electrical design.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. DXF uses unscaled drawing units; a GA envelope supplies no product dimensions, clearances or fabrication information. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.