DN-DIS4
DWG inside ZIP · 11.0 MB
In the archive: Other PLC Products/DINnectors/Disconnect Terminal Blocks/DN-DIS4.dwg
Download the full archive, then extract this named drawing.
AutomationDirect
DN-DIS4 disconnect terminal block drawing CAD drawings & downloads
Manufacturer drawings for DN-DIS4 support disconnect terminal block layout and mechanical-interface coordination. Check native drawing units and import scale before taking any dimensions. Use the named original drawing for mounting details and confirm the selected configuration in the current manufacturer documentation.
DWG · 2 listed files · Source checked 2026-10-13
Source-only
These files are supplied by the manufacturer. Use the official source, or ask our team to obtain the drawings for your selected equipment.
Download files
Official source routesDN-DIS4MN
DWG inside ZIP · 11.0 MB
In the archive: Other PLC Products/DINnectors/Disconnect Terminal Blocks/DN-DIS4MN.dwg
Download the full archive, then extract this named drawing.
Need another model or format?
Equipment and file summary
- Equipment / resource
- DN-DIS4 disconnect terminal block drawing
- Manufacturer
- AutomationDirect
- Resource type
- Named drawing reference
- Listed file formats
- DWG
- Listed files
- 2
- Available previews
- Manufacturer source / drawing request
- Recorded revisions
- Confirm the revision with the manufacturer
- Source checked
- 2026-10-13
- Download access
- Use the official manufacturer source or request the exact drawing
Model image preview
This source-only entry has no drawing preview hosted here. Use the manufacturer source or request the drawing with your email.
Explore the model in 3D
Choose the model or configuration at the manufacturer, or request a 3D file here.
Which file should I choose?
The acquired source archive contains Other PLC Products/DINnectors/Disconnect Terminal Blocks/DN-DIS4.dwg, a 180,675-byte DWG native file. Its file signature and SHA-256 were checked against the held original. Native non-text geometry was also compared to identify repeated mechanical outlines. A terminal drawing does not establish the circuit connection or the current permitted for a complete terminal strip. Use the original drawing annotations and current installation instructions to confirm units, revision and service space. Additional verified grouped archive paths: Other PLC Products/DINnectors/Disconnect Terminal Blocks/DN-DIS4MN.dwg. These paths retain their own archive and native checksums in the file evidence.
What is included?
This page identifies DN-DIS4.dwg, DN-DIS4MN.dwg in AutomationDirect's DINnectors and DIN Rail collection.
The ZIP remains complete. Other members are part of the same manufacturer package, rather than separate downloads for this page.
The listed drawing files are provided as supplied. No 3D model is inferred from these drawings.
Before using it
- Confirm that DN-DIS4 is the intended drawing identity for the selected disconnect terminal block.
- Check native drawing units and import scale before taking any dimensions.
- Check conductor approach, screwdriver access and identification space before fixing the next device.
- Check the complete assembly and its current installation instructions, including any omitted hardware.
- Retain the manufacturer drawing revision and the source archive identity with the project record.
In plain English
What the equipment does
A disconnect terminal provides a wire connection that can be opened at a defined point for the selected testing or isolation arrangement.
A simple example
In a substation relay panel, it can provide an identified separation point in an auxiliary measurement or control circuit.
Questions about this resource
What does the DN-DIS4 file identify?
It identifies the named disconnect terminal block drawing in the official DINnectors and DIN Rail archive. Its native member path and checksum are recorded below; this is stronger evidence than a search result or an inferred catalogue number.
Does this drawing include the complete installation?
A terminal drawing does not establish the circuit connection or the current permitted for a complete terminal strip. Coordinate adjacent components, wiring and required working space separately.
Which file should I use?
Download the official original archive and select the recorded native member. Follow publisher access terms; this page does not replace the current manufacturer drawing or grant redistribution rights.
Equipment references and drawing guides
Matching GA product reference
Related GA equipment
Electrical drawing guides →Sources & versions
Original publisher: AutomationDirect. Source checked 2026-10-13. Acquired originals retain their publisher filenames.
- DN-DIS4
dinnectors.zip ↗ · Acquired 2026-10-13 - DN-DIS4MN
dinnectors.zip ↗ · Acquired 2026-10-13
- Manufacturer
- AutomationDirect
- Resource
- Named drawing reference
- Formats
- DWG
- Regional source coverage
- US / Global
US and Canada supplier catalogue; globally discoverable. Regional suitability must be verified for exact part.
Verified native files
- Other PLC Products/DINnectors/Disconnect Terminal Blocks/DN-DIS4.dwg · DWG · 176 KB
SHA-256: c67a3db9fb4982ccd7f8a0ba8a2a2b09e49f99fc84504c04145287730ae280fb - Other PLC Products/DINnectors/Disconnect Terminal Blocks/DN-DIS4MN.dwg · DWG · 176 KB
SHA-256: c67a3db9fb4982ccd7f8a0ba8a2a2b09e49f99fc84504c04145287730ae280fb
Full DINnectors and DIN Rail source collection →
More wiring & terminals · More AutomationDirect drawings · Request other equipment