Side-by-side reference

Understand the difference.

Compare the meaning, drawing context and source references of two entries. A similar graphic or shared abbreviation does not establish equivalence.

First referenceCompare with

Q021208

IEC

Mechanical stop-latch indication

A stop-latch indication identifies a mechanically retained control position. A stop latch mechanically retains a position until its specified release action occurs. The mechanism state can be maintained without an electrical holding coil remaining energised.

Drawing use: Schematic
Application: Control circuits
Reference family: IEC / Manufacturer
Form evidence: Mechanical stop-latch indication. Autodesk IEC-60617 Symbol Preview — Mechanical return and interlock qualifiers; vendor family reference, not certified IEC geometry or database identifier.

A distinction that matters

A stop latch is distinct from a timer holding a circuit electrically.

Full reference

Coil

Symbols

Relay coil

A relay coil represents an operating element that changes the state of associated contacts when the device operates. Coil and contact representations are often drawn in different locations to make the circuit easier to read. Their shared identifier and cross-references establish the relationship.

Drawing use: Schematic
Application: Control circuits
Reference family: IEC / IEEE / ANSI

A distinction that matters

A relay coil is not a contactor power pole. Similar operating-element marks can represent equipment with different switching duties.

Full reference

Original educational previews. Follow the source references on each full entry for the appropriate standard or selected product.