30487 6041
STEP inside ZIP · 339 KB
In the archive: 30487_6041.STEP
Download the full archive, then extract this named drawing.
Pfannenberg
Pfannenberg DTFS 6041 STEP geometry CAD models & downloads
This STEP member is labelled 30487_6041 and belongs to the DTFS cooling-unit collection. The cooler’s job is to remove heat from an enclosure; this model describes physical geometry for coordination.
STEP · 1 listed file · Source checked 2026-10-13
Download files
Original files · Hosted hereNeed another model or format?
2D drawing preview
Orthographic views of the original 3D model. These projections do not add dimensions or replace a manufacturer drawing sheet.
30487 60412D projection of manufacturer geometry
Loading 3D preview…
Drag to pan · Scroll or pinch to zoom. Projection: 30487_6041.STEP. Downloads above contain the original CAD.
Explore the model in 3D
30487 6041Original manufacturer geometry
Loading 3D preview…
Drag to rotate · Scroll or pinch to zoom. Preview: 30487_6041.STEP. Downloads above contain the original CAD.
Which file should I choose?
Open 30487_6041.STEP from the manufacturer archive. Keep it distinct from the grouped 6021/6031 member. Use the matching installation and cut-out files for the selected unit, and establish cooling performance through the actual application and manufacturer data.
What is included?
This page identifies 30487_6041.STEP in Pfannenberg's DTFS 6041 cooling geometry, cut-out and EPLAN data collection.
Reviewed native file: 30487_6041.STEP · 1.2 MB · STEP.
The ZIP remains complete. Other members are part of the same manufacturer package, rather than separate downloads for this page.
Before using it
The preview geometry spans 280 × 552 × 282.4 mm. Allow additional space for cable connections and service access.
- Confirm the exact 6041 configuration.
- Obtain the matching cut-out and installation documents.
- Coordinate service access and specified airflow space.
Using this drawing
A cabinet designer can position the selected 6041 cooling unit and compare access, adjacent equipment and the separate mounting cut-out documents.
Questions about this resource
Is the outer STEP body the panel cut-out?
No. The physical model and the required cut-out are different deliverables. Use the manufacturer’s matching cut-out file for the opening.
Sources & versions
Original publisher: Pfannenberg. Source checked 2026-10-13. Acquired originals retain their publisher filenames.
- 30487 6041
3D-models_STEP_DTFS.zip ↗ · Acquired 2026-10-13 · Pfannenberg
- Manufacturer
- Pfannenberg
- Resource
- Named drawing reference
- Formats
- STEP
- Regional source coverage
- Global
Source discoverability only. Exact USA/Australia configuration, units, frequency and approvals require manufacturer verification.
Verified file identity
30487_6041.STEP · STEP · 1,266,943 bytes
SHA-256: 4c80477b2e66738ab30052c4dc16407dbcc4b3ea976569966c688d426fcd3e42Full DTFS 6041 cooling geometry, cut-out and EPLAN data source collection →
More thermal management · More Pfannenberg drawings · Request other equipment