EA7-T10C cutout-new
DWG inside ZIP · 9.3 MB
In the archive: Operator Interface/Cmore/EA7-T10C_cutout-new.dwg
Download the full archive, then extract this named drawing.
AutomationDirect
EA7-T10C_cutout-new C-more operator-panel hardware CAD drawings & downloads
Manufacturer drawings for EA7-T10C_cutout-new support hmi layout and mechanical-interface coordination. Check the panel opening and rear housing together; keep connectors, retaining hardware and the service route accessible. Use the named original drawing for mounting details and confirm the selected configuration in the current manufacturer documentation.
DWG · 2 listed files · Source checked 2026-10-13
Source-only
These files are supplied by the manufacturer. Use the official source, or ask our team to obtain the drawings for your selected equipment.
Download files
Official source routesEA7-T10C new
DWG inside ZIP · 9.3 MB
In the archive: Operator Interface/Cmore/EA7-T10C_new.dwg
Download the full archive, then extract this named drawing.
Need another model or format?
Equipment and file summary
- Equipment / resource
- EA7-T10C_cutout-new C-more operator-panel hardware CAD drawing
- Manufacturer
- AutomationDirect
- Resource type
- Named drawing reference
- Listed file formats
- DWG
- Listed files
- 2
- Available previews
- Manufacturer source / drawing request
- Recorded revisions
- Confirm the revision with the manufacturer
- Source checked
- 2026-10-13
- Download access
- Use the official manufacturer source or request the exact drawing
Model image preview
This source-only entry has no drawing preview hosted here. Use the manufacturer source or request the drawing with your email.
Explore the model in 3D
Choose the model or configuration at the manufacturer, or request a 3D file here.
Which file should I choose?
The verified native member is Operator Interface/Cmore/EA7-T10C_cutout-new.dwg. Its identity was checked against the acquired manufacturer archive. Check the panel opening and rear housing together; keep connectors, retaining hardware and the service route accessible. The drawing is a mechanical coordination reference, not a circuit design or certification record. Associated drawing identities with matching non-text geometry or explicit voltage/view aliases are grouped here: EA7-T10C_new. Grouping does not establish electrical interchangeability.
What is included?
This page identifies EA7-T10C_cutout-new.dwg, EA7-T10C_new.dwg in AutomationDirect's C-more Panels collection.
The ZIP remains complete. Other members are part of the same manufacturer package, rather than separate downloads for this page.
The listed drawing files are provided as supplied. No 3D model is inferred from these drawings.
Before using it
- Confirm that the project schedule calls for EA7-T10C_cutout-new or an explicitly documented associated drawing identity.
- Check the panel opening and rear housing together; keep connectors, retaining hardware and the service route accessible.
- Check the units and drawing revision before measuring or inserting geometry into a project.
- Review the front-panel opening together with the rear housing, retainers and connector cable bend space.
- Verify ratings, compatible accessories and installation clearances using the manufacturer documentation for the exact device.
In plain English
What the equipment does
An operator screen lets a person see equipment status, measurements and alarms, and use the controls provided by the system.
A simple example
In a switchroom, the screen can show which feeders are running and identify the equipment associated with an alarm.
Questions about this resource
What does the EA7-T10C_cutout-new reference verify?
It verifies the acquired native drawing identity and its place in the official C-more operator-panel hardware source collection. The source member and checksums identify the reviewed file; they do not establish the selected device rating or current revision.
How should I use the original file?
Download the unchanged manufacturer archive from the official route and locate Operator Interface/Cmore/EA7-T10C_cutout-new.dwg. Check the drawing units and revision before using its geometry in the project.
Can grouped drawing identities replace one another electrically?
No. Mechanical drawing grouping only avoids separate pages for matching geometry, views or voltage aliases. Confirm exact electrical function, connection arrangement and manufacturer compatibility separately.
Equipment references and drawing guides
Matching GA product reference
Related GA equipment
Electrical drawing guides →Sources & versions
Original publisher: AutomationDirect. Source checked 2026-10-13. Acquired originals retain their publisher filenames.
- EA7-T10C cutout-new
cmore.zip ↗ · Acquired 2026-10-13 - EA7-T10C new
cmore.zip ↗ · Acquired 2026-10-13
- Manufacturer
- AutomationDirect
- Resource
- Named drawing reference
- Formats
- DWG
- Regional source coverage
- US / Global
US and Canada supplier catalogue; globally discoverable. Regional suitability must be verified for exact part.
Verified native files
- Operator Interface/Cmore/EA7-T10C_cutout-new.dwg · DWG · 124 KB
SHA-256: 6e5d66b8acba1bd41540d5d95e7ad51d8ec2ac0b7cc75e495bff487386e5e88e - Operator Interface/Cmore/EA7-T10C_new.dwg · DWG · 274 KB
SHA-256: 7bd51ce8b7a0dd4cc8e2a03b171db060757c6cb32e23a63372a892106d0a028f
Full C-more Panels source collection →
More automation & controls · More AutomationDirect drawings · Request other equipment