P1-10RTB-1
DWG inside ZIP · 15.3 MB
In the archive: PLC Families/P1000/P1-10RTB-1.dwg
Download the full archive, then extract this named drawing.
AutomationDirect
P1-10RTB-1 Productivity1000 PAC hardware CAD drawings & downloads
Manufacturer drawings for P1-10RTB-1 support plc-io layout and mechanical-interface coordination. Lay out the PAC station before locating cable duct so the terminal strips and expansion joints remain accessible. Use the named original drawing for mounting details and confirm the selected configuration in the current manufacturer documentation.
DWG · 1 listed file · Source checked 2026-10-13
Source-only
These files are supplied by the manufacturer. Use the official source, or ask our team to obtain the drawings for your selected equipment.
Download files
Official source routesNeed another model or format?
Equipment and file summary
- Equipment / resource
- P1-10RTB-1 Productivity1000 PAC hardware CAD drawing
- Manufacturer
- AutomationDirect
- Resource type
- Named drawing reference
- Listed file formats
- DWG
- Listed files
- 1
- Available previews
- Manufacturer source / drawing request
- Recorded revisions
- Confirm the revision with the manufacturer
- Source checked
- 2026-10-13
- Download access
- Use the official manufacturer source or request the exact drawing
Model image preview
This source-only entry has no drawing preview hosted here. Use the manufacturer source or request the drawing with your email.
Explore the model in 3D
Choose the model or configuration at the manufacturer, or request a 3D file here.
Which file should I choose?
The verified native member is PLC Families/P1000/P1-10RTB-1.dwg. Its identity was checked against the acquired manufacturer archive. Lay out the PAC station before locating cable duct so the terminal strips and expansion joints remain accessible. The drawing is a mechanical coordination reference, not a circuit design or certification record.
What is included?
This page identifies P1-10RTB-1.dwg in AutomationDirect's Productivity1000 PAC collection.
The ZIP remains complete. Other members are part of the same manufacturer package, rather than separate downloads for this page.
The listed drawing files are provided as supplied. No 3D model is inferred from these drawings.
Before using it
- Confirm that the project schedule calls for P1-10RTB-1 or an explicitly documented associated drawing identity.
- Lay out the PAC station before locating cable duct so the terminal strips and expansion joints remain accessible.
- Check the units and drawing revision before measuring or inserting geometry into a project.
- Map the shown hardware to the intended station position, terminal approach and control drawing; reserve access to ports and removable terminals.
- Verify ratings, compatible accessories and installation clearances using the manufacturer documentation for the exact device.
In plain English
What the equipment does
A programmable controller reads equipment signals, follows its program and sends commands to other devices. Input and output modules connect it to the equipment.
A simple example
In a switchroom, it can read temperature and fan-status signals, then request ventilation and report an alarm if the fan fails to run.
Questions about this resource
What does the P1-10RTB-1 reference verify?
It verifies the acquired native drawing identity and its place in the official Productivity1000 PAC hardware source collection. The source member and checksums identify the reviewed file; they do not establish the selected device rating or current revision.
How should I use the original file?
Download the unchanged manufacturer archive from the official route and locate PLC Families/P1000/P1-10RTB-1.dwg. Check the drawing units and revision before using its geometry in the project.
Can grouped drawing identities replace one another electrically?
No. Mechanical drawing grouping only avoids separate pages for matching geometry, views or voltage aliases. Confirm exact electrical function, connection arrangement and manufacturer compatibility separately.
Equipment references and drawing guides
Matching GA product reference
Related GA equipment
Electrical drawing guides →Sources & versions
Original publisher: AutomationDirect. Source checked 2026-10-13. Acquired originals retain their publisher filenames.
- P1-10RTB-1
p1000.zip ↗ · Acquired 2026-10-13
- Manufacturer
- AutomationDirect
- Resource
- Named drawing reference
- Formats
- DWG
- Regional source coverage
- US / Global
US and Canada supplier catalogue; globally discoverable. Regional suitability must be verified for exact part.
Verified native files
- PLC Families/P1000/P1-10RTB-1.dwg · DWG · 336 KB
SHA-256: 1d87267192f1e5af3ad0052dbe71bb190b6561971f11577cf0b8a3e93bcf3df7
Full Productivity1000 PAC source collection →
More automation & controls · More AutomationDirect drawings · Request other equipment